WebCT is the web interface for Wavence devices using the CorEvo card. WebCT provides configuration information, alarms, monitoring, and administration functions. See the Wavence WebCT User Manual for more information about WebCT.

NFM-P supports the cross-launch of WebCT from the equipment navigation tree and the topology map. You can also reset the password for the WebCT initial user using the NFM-P.

NSP supports the cross-launch of WebCT from the Network Map and Health view using the Open in NE Session action.

WebCT password complexity rules

By default, the minimum password length for WebCT is 8 characters. However, you can configure minimum password length and complexity on WebCT, and the settings can be viewed, but not modified, in NFM-P and NSP. When you change the WebCT password using NFM-P or NSP, the new password is validated against the WebCT password rules, and passwords that violate the rules are rejected.

After you change the password settings for WebCT, you can use the NSP to update WebCT passwords on one or more nodes; see To change the WebCT password on one or more Wavence nodes using an NSP operation.

TACACS+

TACACS+ server settings can be configured for UBT-SA and MSS-XE nodes using WebCT. After the server settings are configured, a resync must be triggered for the settings to appear in the NFM-P. See the NSP NFM-P Classic Management User Guide for information about performing a resync on a node.