How do I modify the demand bandwidth of an LSP?

Purpose

This procedure can be used to manually modify the demand bandwidth of one or more LSPs. An LSP's demand bandwidth is the aggregate bandwidth requested by its source and destination.

Steps
 
1 

From the Path Simulation, LSP Demand Matrix view, a list of all demands associated with all existing LSPs is displayed.

To view a list of LSPs affected by a specific demand, click More png4.png, Show in LSP List inline with any demand. A list of the LSPs affected by the selected demand is displayed.

2 

Return to the list of demands, then perform one of the following:

  1. To edit the bandwidth of a single demand, click More png4.png, Edit Bandwidth inline with any demand. The Edit Demand Bandwidth form opens.

  2. To edit the bandwidth of multiple demands, select multiple demands and click Edit Bandwidth png7.png. The Edit Demand Bandwidth form opens.

3 

Enable the radio button next to one of the following parameters to provide a value:

Parameter

Description

Set to (Mbps)

Specifies a new demand bandwidth value in Megabits per second.

Increase by %

Specifies an increase in demand bandwidth relative to the existing value.

Decrease by %

Specifies a decrease in demand bandwidth relative to the existing value.

4 

Click SAVE. The Edit Demand Bandwidth form closes.

End of steps

© 2025 Nokia. Nokia Confidential Information

Use subject to agreed restrictions on disclosure and use.