How do I view the NFM-P auxiliary server status?

Steps
 
1 

Choose Administration→System Information. The System Information form opens.

2 

Click on the Auxiliary Servers tab.

3 

Review the list of auxiliary servers.

4 

Select an auxiliary server in the list and click Properties. The properties form for the auxiliary server opens.

5 

Review the auxiliary server information, which includes the following:

  • Host Name—the host name of the auxiliary server

  • Port Number—identifies the port that the auxiliary server uses to communicate with each main server and database

  • Auxiliary Server Type—Reserved or Preferred

  • Server Status—Unknown, Down, Up or Unused

  • Resource Managed—selected if the auxiliary server is included in NFM-P resource management

  • Public IP address—the IP address that the main servers use to reach the auxiliary server

6 

Perform one of the following:

  1. View the following main server information for a redundant system:

    • Server 1 Public IP address—the IP address that the auxiliary server uses to communicate with the primary or standby main server

    • Server 2 Public IP address—the IP address that the auxiliary server uses to communicate with the primary or standby main server

  2. View the following main server information for a standalone system:

    • Server Public IP address—the IP address that the auxiliary server uses to communicate with the main server

7 

Click on the Auxiliary Services tab.

8 

Review the list of auxiliary services.

9 

Review the information for each auxiliary service, which includes the following:

  • Service Name—the type of service, for example, statistics collection

  • Selected—indicates whether this auxiliary server is currently used by a main server to process requests

  • IP Address—the IPv4 address that the managed NEs use to reach the auxiliary server

  • IPv6 Address—the IPv6 address that the managed Wavence NEs use to reach the auxiliary server

  • Host Name—the host name of this auxiliary server

  • Auxiliary Server Type—Reserved or Preferred

10 

Close the Auxiliary Services form.

11 

Click on the Faults tab to view alarm information, if required.

12 

Close the form.

End of steps