| |
|
1 |
Choose Tools→Statistics→MIB Policies from the NFM-P main menu. The Manage MIB Statistics Policies form opens.
|
2 |
Choose NE MIB Statistics Policy (SNMP).
|
3 |
Specify a filter to create a filtered list of MIB statistics policies, if required, and click Search. A list of MIB statistics policies is displayed.
|
4 |
Click Create, or choose a MIB statistics policy from the list and click Properties. The NE MIB Statistics Policy (Create|Edit) form opens.
Note: When you change a MIB statistics policy for an NE, the change affects all of the NEs to which the policy is assigned.
When you change a MIB statistics policy for a statistics class of an object, the change applies to all objects that use the same statistics class.
|
5 |
Configure the required parameters.
Note: To view statistics on the NFM-P GUI, you must set the Administrative State parameter of the MIB statistics policy to UP and the Polling Admin State parameter must be set to UP.
|
6 |
Click Apply. The form refreshes to display additional tabs.
|
7 |
Click on the Network Elements tab.
|
8 |
Click Assign Sites. A filter form opens.
|
9 |
Configure the filter criteria and click OK. The Assign policy_name form opens with a list of NEs displayed.
|
10 |
Select one or more NEs from the Unassigned Sites list, and click the right arrow. The selected NEs move to the Assigned Sites list.
Note: You can also assign an NE MIB policy to NEs using a discovery rule. Doing this does not affect the previously discovered NEs. See the NSP NFM-P Classic Management User Guide for information about device discovery.
|
11 |
Click OK. The Assign policy_name form closes and the NE MIB Statistics Policy form reappears.
|
12 |
Save your changes and close the forms.
End of steps |