How do I set up TSC?

This section describes the pre-configuration tasks required to use the TSC.

Obtain and import the required intent bundles

TSC requires the following intent bundles:

  • NSP_Predefined_IETF_Artifacts_rel.zip — NSP (Network Services Platform)/25.4/Beta_Artifacts/App_Specific_Artifacts)

  • service-mgt-artifacts-common-nsp-rel-cam.zip — NSP (Network Services Platform)/25.4/Artifacts/Artifact_Bundles

  • service-mgt-artifacts-unified-nsp-rel-cam.zip — NSP (Network Services Platform)/25.4/Artifacts/Artifact_Bundles

  • NSP_Transport_Slice_Intent_rel.zip — NSP (Network Services Platform)/25.4/Artifacts/App_specific_Artifacts

See the NSP Network Automation Guide for more information about obtaining and installing intent bundles, and importing MDM mapping files.

Obtain and set operator preferences

Obtain the operator-preferences.json intent type file for the current release from Nokia support. This file contains configuration data that is pre-configured and imported by the NSP as a setup task for the TSC. The import operation is generally performed only once.

Important preferences settings

Make sure to set the following correctly:

  • AS number (autonomous-system)

  • Service type—the ServiceType parameter must be set to the same value as slo-sle-template in the IETF NBI data model.

  • Service template name—the ServiceTemplateName specifies the service intent used to realize the slice service.

  • Isolation