To display show router fp-tunnel information for a routing instance
Purpose
Perform this procedure to display show router fp-tunnel information for a routing instance including the IOM/IMM label, next hop, and outgoing interface information for BGP, LDP and RSVP tunnels.
Steps
1 |
In the navigation tree routing view, expand Network→NE→Routing Instance. |
2 |
Right-click on the Routing Instance icon and choose Show FP Tunnel Table from the menu. The FP RTR Show FP Tunnel Table form appears. |
3 |
Configure the parameters as required. |
4 |
Click OK. The fp rtr Show FP Tunnel table opens and a CLI session is initiated.The FP tunnel table information for a routing instance is displayed. End of steps |