To configure a BFD template policy
Purpose
You can apply a BFD template policy to the following:
-
LSP-path bindings; see To configure a Dynamic or segment routing TE LSP .
-
Proactive OAM template on an enabled MPLS-TP routing instance; see To configure MPLS-TP on a routing instance .
-
Bidirectional MPLS-TP LSP; see To create a bidirectional MPLS-TP LSP .
-
PW Template Binding; see To configure a site for BGP AD or BGP VPLS .
-
-
For VLL sites; see To configure a spoke SDP binding on a VLL site , or To configure a spoke SDP binding with an L2TPv3 tunnel on a VLL Epipe site.
-
For a VPLS; see To configure BFD on a VPLS SDP binding .
-
For an IES; see To configure BFD on an IES spoke SDP binding .
-
For a VPRN; see To configure BFD on a VPRN spoke SDP binding .
-
Steps
1 |
Choose Policies→BFD Templates from the NFM-P main menu. The Manage BFD Templates form opens. |
2 |
Click Create. The BFD Template, Global Policy (Create) form opens. |
3 |
Configure the required parameters. |
4 |
Click Apply. The BFD Template (Edit) form refreshes with additional tabs. |
5 |
As required, click on the appropriate tabs and click Search to determine to which network objects the BFD template policy is applied. |
6 |
Click OK to save the policy and close the form. See To release and distribute a policy to release and distribute the policy to NEs. End of steps |