To create a static ISID range on a VPLS B-L2 access interface or spoke SDP binding

Purpose

Perform the following procedure to create a static ISID range to allow I-VPLS services to connect to non-SPB I-VPLS services. You can create one or more static ISID ranges on a B-L2 access interface or spoke SDP binding on a control or user B-VPLS site. See To enable SPB on a control B-VPLS site and To enable SPB on a user B-VPLS site for information about how to enable SPB on a control or user site.

Steps
 
1 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.

2 

Choose a VPLS and click Properties. The VPLS Service (Edit) form opens.

3 

On the service tree, expand the B-VPLS site.

4 

Perform one of the following:

  1. To add a static ISID range on a B-L2 access interface, expand the L2 Access Interfaces icon, and click on the B-L2 access interface. The Port (Edit) form opens.

  2. To add a static ISID range on an SDP binding, expand the Spoke SDP Bindings icon and click on the SDP binding. The Spoke SDP Binding (Edit) form opens.

5 

Click on the Static ISID tab.

6 

Click Create. The Static ISID Range Entry (Create) form opens.

7 

Configure the required parameters.

8 

Save the changes and close the form.

9 

To view the status information about the configured static ISIDs, click on the Static ISID Ranges tab.

10 

Save the changes and close the forms.

End of steps