| |
|
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.
|
2 |
Choose a VPRN service and click Properties. The VPRN Service (Edit) form opens.
|
3 |
On the service navigation tree, expand the Sites icon, right-click on a routing instance and choose Properties. The VPRN Site (Edit) form opens.
|
4 |
Enable the Enable WLAN GW parameter.
|
5 |
Click on the WLAN GW tab and configure the APN Network Identifier parameter.
|
6 |
Configure the parameters in the Mobile Triggered Accounting panel.
|
7 |
Click on the Mobile GW Address Map tab to configure a mobile GW address map.
-
Click Create. The Mobile Gateway Address Map (Create) form opens.
-
Configure the Mobile Gateway Address Prefix and Prefix Length parameters.
-
Select a mobile gateway/peer profile policy.
-
Save your changes and close the form.
|
8 |
Click on the Distributed Subscriber Management tab and configure the TCP Maximum Segment Size Adjustment parameter.
|
9 |
Click on the Distributed Subscriber Management tab and configure the TCP Maximum Segment Size Adjustment parameter.
|
10 |
If the WLAN GW is intended for a home LAN extension configuration, click on the Cross Connect tab.
Configure the required parameters and select a WLAN GW group.
|
11 |
Save the changes and close the forms.
End of steps |