To configure a shared policer policy

Purpose

A shared policer policy is a VLAN group policer for rate limit traffic from many VLANs. FCs from many VLANs are policed by the shared policer. The policy allows ingress policing to support a group of VLANs instead of a single VLAN.

Steps
 
1 

Choose→Policies→QoS→SROS QoS→Shared Policer from the NFM-P main menu. The Shared Policer (Create|Edit) form opens.

2 

Click Create or choose a policy and click Properties. The Shared Policer (Create|Edit) form opens.

3 

Configure the required parameters.

4 

Configure the CIR/PIR parameters:

  1. Click on the CIR/PIR tab.

  2. Configure the required parameters.

5 

Configure the Burst Size parameters:

  1. Click on the Burst Size tab.

  2. Configure the required parameters.

    The parameters are configurable when the Default check box above each is deselected.

6 

Click OK to save the policy and close the form, or click Apply to save the policy. See To release and distribute a policy to release and distribute the policy to NEs.

End of steps