To create an OSPF area
Steps
1 |
In the navigation tree OSPF view, right-click on the OSPFv2 instance and click Create Area. The Area Site (Create) form opens. |
2 |
Configure the required general parameters. |
3 |
Configure the Area ID parameter and click Apply. Note: You can create up to four areas on an OSPFv2 instance. Default is Area0 with IP address 0.0.0.0. |
4 |
Repeat Step 1 to Step 3 to configure multiple areas. |
5 |
Save your changes and close the form. End of steps |