Install the adaptors and artifacts

Steps
 
1 

Perform the following to install the required adaptors:

  1. Log in to the Deployer node and execute the following commands to create an “Adaptors” folder under the /opt/ directory:

    [root@vdeployer-srl-25-4 ~]# cd /opt/Adaptors/

    [root@vdeployer-srl-25-4 Adaptors]# pwd

    /opt/Adaptors

  2. Copy the following adaptor files to the /opt/Adaptors directory:

    • srl-oc-logical-inventory-25_4.zip

    • srl-25-3-1-25_4.zip

    • srl-common-25_4.zip

  3. Execute the following commands to navigate to the folder where the adaptor-suit.bash file is present:

    [root@vdeployer-srl-25-4 opt]# cd /opt/build/NSP-CN-DEP-25.4.0-rel.387/NSP-CN-25.4.0-rel.396/tools/mdm/bin/

    [root@vdeployer-srl-25-4 bin]# pwd /opt/build/NSP-CN-DEP-25.4.0-rel.387/NSP-CN-25.4.0-rel.396/tools/mdm/bin [root@vdeployer-srl-25-4 bin]# ls adaptor-suite.bash json-files.bash ne-model.bash server-load.bash yang-files.bash [root@vdeployer-srl-25-4 bin]#

  4. Execute the following commands to install the adaptors:

    [root@vdeployer-srl-25-4 bin]#./adaptor-suite.bash --install <location> --user <username> --pass <password>

2 

Perform the following to install the required artifacts:

  1. Log in to the NSP and click Artifacts, as shown below:

    graphic

  2. Click IMPORT & INSTALL, as shown below:

  3. Click Browse, as shown below:

  4. Select the following artifacts:

    • service-mgt-artifacts-unified-nsp-23-11-0-25-04-0-cam

    • service-mgt-artifacts-common-nsp-25-04-0-cam 

    • device-config-artifacts-srl-23-10-1-nsp-25-4-0-v1 

    • nsp-telemetry-cr-va-srl-2.4.0-rel.0

    • nsp-mdt-intents-25.4.0-rel.75-svc-intent-bundle.zip

    Click IMPORT & INSTALL.

  5. Verify that the artifacts are installed, as shown below:

End of steps