Miscellaneous configurations

To configure macsec-ca_csros
 

In Device Management, select Configuration Deployments. From the DEPLOYMENT drop-down menu, select Logical.


Click on +TEMPLATE and select macsec-ca_csros.


Click on +TARGETS and select NEs. Select the NE and click ADD.


Click on VIEW/EDIT TEMPLATE CONFIG.


Configure the following attributes:

Pre Shared Key attributes:

Site attributes:

Site entry should look as follows:


Enter the CA name and select DEPLOY.


Verify that the policy is Deployed and Aligned.


Log into NE and verify the configuration is deployed.

View the figure

End of steps

To configure system-lldp_csros
 

In Device Management, select Configuration Deployments. From the DEPLOYMENT drop-down menu, select Logical.


Click on +TEMPLATE and select system-lldp_csros.


Click on +TARGETS and select NEs. Select the NE and click ADD.


Click on VIEW/EDIT TEMPLATE CONFIG.


Enter the required details:


Enter the LLDP name and select DEPLOY.


Verify that the LLDP is Deployed and Aligned.


Log into NE and verify the configuration is deployed.

End of steps

To configure icm-service-system_evpn
 

In Device Management, select Configuration Deployments. From the DEPLOYMENT drop-down menu, select Logical.


Click on +TEMPLATE and select icm-service-system_evpn.


Click on +TARGETS and select NEs. Select the NE and click ADD.


Click on VIEW/EDIT TEMPLATE CONFIG.


Enter the required details:

View the figure

Enter the name and select DEPLOY.


Verify it is Deployed and Aligned.


Log into NE and verify the configuration is deployed.

End of steps

To configure file-accounting_gsros
 

In Device Management, select Configuration Deployments. From the DEPLOYMENT drop-down menu, select Logical.


Click on +TEMPLATE and select file-accounting_gsros.


Click on +TARGETS and select NEs. Select the NE and click ADD.


Click on VIEW/EDIT TEMPLATE CONFIG.


Configure the following attributes.

Log attributes:

Queue attributes:

Reference Queue attributes:

Policier attributes:

Additional Log attributes:


Enter the Accounting Policy ID and select DEPLOY.


Verify the policy is Deployed and Aligned.


Log into NE and verify the configuration is deployed.

View the figure

End of steps