Prerequisites
Required topology for SRL L3 VPN
Below is the expected topology to be used when configuring an L3 VPN on an SRL device.
The following nodes comprise the topology: leaf1-1, leaf1-2, leaf1-3, leaf1-4, spine2-1, spine2-2, CE1, CE2, and CE3.
Of these, the following nodes are used: CE1, leaf1-1, spine2-1, leaf1-2, and CE2.
The following yml file is to be used: virtualMDM_ibsf_SRL_25-3.yml.
Required NSP heat templates
The 25.4 NSP heat templates can be found here: http://orbw-git.ca.alcatel-lucent.com/pnt/pnt-nspcloud-templates/-/raw/25.4.0-rel/generated/NSP/cloudNative/NFMP_and_4xClustered_NSP_cloudNative_sdn.yaml.
