Open Data Collection and Analysis Management, Baselines.

Click Baseline.

In the Create Baselines form that opens, configure the General parameters as needed.

Enter information in the Telemetry Type field. As you type, the field filters for available telemetry types to match your input.

Choose the telemetry type you need from the list of matches.

Click Counters.

In the Add Counters form that opens, choose the required counters and click Add.

Configure the Counter parameters as needed.

Click Counters to add additional counters if needed.

Add an optional detector rule for each counter as needed:

1. Click Detector Rule.

2. Configure the rule parameters.

Repeat steps 1 and 2 to add detector rules for other counters.

In the Object Filter field, enter filtering information as needed to filter the collected data.

As you type, the field provides suggestions for available filters to match your input and identifies incorrect syntax.

Click Verify Resources.

NSP searches for resources that are collecting statistics to match the telemetry type and object filter.

Note: NFM-P resources appear in the list after the NFM-P collects the statistics. Therefore, you need to wait for the current collection interval to end before the NFM-P resource appears in the list.

If needed, you can update the filter or counters list during verification and click Verify Resources again to restart the verification process.

When the resources you need appear in the resources list, click Stop Verification.

Select the resources you need in the resources list.

Click Create.

End of steps