How do I enable or disable anti-theft mode?

Purpose

Use this procedure to update anti-theft mode in the NSP for one or more NEs.

When you select multiple NEs, NSP opens a Create Operation window to perform the update on multiple NEs at one time.

This procedure must be performed from the Device Management, Managed Network Elements view. Performing OS security related procedures from the Operations views and using CLI on the NE are not recommended.

Steps
 
1 

Open a view showing the NE:

  1. Open Device Management, Managed Network Elements

  2. Open the list of included NEs for an OS Policy:

    1. Open Network Security, OS Security Policies.

    2. Select a policy and click View in the Info panel.

2 

Update anti-theft mode:

  1. Select one NE and click png1.png (Table row actions), OS Security, Enable Anti-theft Mode or Disable Anti-theft Mode.

    Anti-theft mode is updated and the NE reboots.

  2. Select multiple NEs with the same anti-theft mode, and, at the top of the view, click png1.png (More), Enable Anti-theft Mode or Disable Anti-theft Mode.

    Click Schedule. The Create Operation form opens. Proceed to Step 3.

3 

To update anti-theft mode on multiple NEs, perform the following in the Create Operation form:

  1. Enter a name in the Operation Name field.

  2. In the View/Edit Schedule panel, configure the timing of the operation:

    • To start the operation immediately, choose Run Immediately.

    • To schedule the operation to start at a later time, choose Schedule a date and time and configure the start time.

  3. Click Run.

When the operation runs, anti-theft mode is updated and the NEs reboot.

End of steps