Commission new station, if required

If you are deploying the auxiliary server on a new station, commission the station according to the platform specifications in this guide and in the NSP Planning Guide.

Note: The hostname and IP address of a replacement station must match the hostname and IP address of the station being replaced.

For information about deploying the RHEL OS using an NSP OEM disk image, see NSP disk-image deployment.

Back up configuration

Log in as the root user on the existing auxiliary server station.

Download the following NFM-P installation file to an empty local directory on the existing auxiliary server station:

• linuxMigration.sh

Open a console window.

Enter the following sequence of commands to disable the auxiliary server services:

systemctl disable nfmp-aux.service

systemctl disable nfmp-aux-config.service

Navigate to the directory that contains the downloaded linuxMigration.sh file.

Enter the following:

# chmod +x linuxMigration.sh ↵

Enter the following:

# ./linuxMigration.sh -t aux ↵

The following is displayed:

Backup auxiliary server config contents.

When the backup is complete, the following is displayed:

Please backup/transfer /opt/importConfigs/auxserverBackupConfigs.tar.gz to a secure location.

You must restore this file to the exact same directory location on the RHEL 9 station before installing the rpm(s).

The script creates the following file on the station:

• /opt/importConfigs/auxserverBackupConfigs.tar.gz

Transfer the auxserverBackupConfigs.tar.gz file to a secure location on a separate station for use later in the procedure.

Note: If the system has multiple auxiliary servers, you must ensure that you record which server the file is from.

Decommission existing station

If the auxiliary server is running, stop the auxiliary server.

1. Enter the following to switch to the nsp user:

   # su - nsp ↵

2. Enter the following:

   bash$ cd /opt/nsp/nfmp/auxserver/nms/bin ↵

3. Enter the following:

   bash$ ./auxnmsserver.bash auxstop ↵

4. Enter the following:

   bash$ ./auxnmsserver.bash auxappserver_status ↵

   The auxiliary server is stopped when the following message is displayed:

   Auxiliary Server is stopped 

   If the command output indicates that the server is not completely stopped, wait five minutes and then re-enter the command in this step to check the server status.

   Do not proceed to the next step until the server is completely stopped.

5. Enter the following to switch back to the root user:

   # exit ↵

Enter the following commands in sequence to remove the NFM-P packages:

# dnf remove nsp-nfmp-aux-server ↵

# dnf remove nsp-nfmp-config ↵

# dnf remove nsp-nfmp-jre ↵

After you enter a command, the dnf utility resolves any dependencies and displays the following prompt:

Installed size: nn G 

Is this ok [y/N]: 

Enter y. The following is displayed:

Downloading Packages:

Running transaction check

Transaction check succeeded.

Running transaction test

Transaction test succeeded.

Running transaction

Uninstalling the NFM-P package...

As each package removal completes, the following is displayed:

Complete!

Return to Step 11 as required to remove the next package in the sequence.

Recommission existing station, if required

If you are re-using the auxiliary server station, recommission the station according to the platform specifications in this guide and in the NSP Planning Guide.

For information about deploying the RHEL OS using an NSP OEM disk image, see NSP disk-image deployment.

Install auxiliary server software

Log in as the root user on the station that is commissioned as the auxiliary server station.

Enter the following:

# mkdir /opt/importConfigs ↵

Transfer the auxserverBackupConfigs.tar.gz file created in Step 8 to the /opt/importConfigs directory.

Download the following NFM-P installation files to an empty local directory:

• nsp-nfmp-jre-R.r.p-rel.v.rpm

• nsp-nfmp-config-R.r.p-rel.v.rpm

• nsp-nfmp-aux-server-R.r.p-rel.v.rpm

• nsp-nfmp-nodeexporter-R.r.p-rel.v.rpm, if you want to forward NFM-P system metrics to the NSP

where

R.r.p is the NSP release identifier, in the form MAJOR.minor.patch

v is a version identifier

Navigate to the directory that contains the NFM-P installation files.

Note: Ensure that the directory contains only the installation files.

Enter the following:

# chmod +x * ↵

Enter the following:

# dnf install *.rpm ↵

The dnf utility resolves any package dependencies, and displays the following prompt:

Total size: nn G

Installed size: nn G 

Is this ok [y/d/N]: 

Enter y. The following and the installation status are displayed as each package is installed:

Downloading Packages:

Running transaction check

Transaction check succeeded.

Running transaction test

Transaction test succeeded.

Running transaction

The package installation is complete when the following is displayed:

Complete!

Enter the following; see NFM-P samconfig utility for information about using samconfig:

# samconfig -m aux ↵

The following is displayed:

Start processing command line inputs...

<aux>

Verify the auxiliary server configuration.

1. Enter the following:

   <aux> show-detail ↵

   The auxiliary server configuration is displayed.

2. Review each parameter to ensure that the value is correct; see NFM-P samconfig utility for information about using the samconfig utility.

3. If required, modify one or more parameter values, and then enter back ↵.

4. When you are certain that the configuration is correct, enter the following:

   <aux> apply ↵

   The configuration is applied.

5. Enter the following:

   <aux> exit ↵

   The samconfig utility closes.

Close the console window.

End of steps