Optional parameters
After choosing the required parameters, you can modify optional parameters to further customize the fabric intent.Optional parameters (fabric intent) defines the optional fabric intent parameters and the values that can be modified.
Parameter |
Description |
Values/Range |
|---|---|---|
Tier One Oversubscription parameters |
||
Over Subscription Ratio |
The ratio between the bandwidth of the downlink ports and the bandwidth of the uplink ports for the first layer of the fabric. |
Ratio of numbers with a colon between the two numbers, for example 1:3 |
Tier Two Oversubscription parameters |
||
Over Subscription Ratio |
The ratio between the bandwidth of the downlink ports and the bandwidth of the uplink ports for the second layer of the fabric. |
Ratio of numbers with a colon between the two numbers, for example 1:3 |
Mgmt Traffic QoS Profile parameters |
||
Dscp All Mgmt |
QoS priority set to all DSCP management packets. |
BESTEFFORT, LOPRIORITY, MIPRIORITY, HIPRIORITY This field is currently read-only. |
Tos All Mgmt |
QoS priority set to all ToS management packets. |
BESTEFFORT, PRIORITY This field is currently read-only. |
Dscp gNMI |
QoS priority set to all DSCP gNMI packets. |
BESTEFFORT, LOPRIORITY, MIPRIORITY, HIPRIORITY This field is currently read-only. |
Dscp Img Download |
QoS priority set to DSCP image downloads either FTP or HTTP-based. |
BESTEFFORT, LOPRIORITY, MIPRIORITY, HIPRIORITY This field is currently read-only. |
Dscp S Flow |
QoS priority set to DSCP sFlow packets. |
BEST_EFFORT, LOPRIORITY, MIPRIORITY, HIPRIORITY This field is currently read-only. |
Dscp IP Fix |
QoS priority set to DSCP IP fix packets. |
BESTEFFORT, LOPRIORITY, MIPRIORITY, HIPRIORITY This field is currently read-only. |
Uplink parameters |
||
Uplink Speed |
The uplink speed for a leaf-spine fabric. |
1G, 10G, 25G, 40G, 50G, 100G, 200G, 400G |
Unicast Cp |
The type of unicast routing protocol used in the network topology. |
BGP, OSPF, ISIS This field is currently read-only. |
Multicast Cp |
The type of multicast routing protocol used in the network topology. |
None, PIMSM, PIMSSM, PIMBDIR This field is currently read-only. |
Global Configuration parameters |
||
Enable FTP |
Enables the File Transfer Protocol on the nodes in this fabric. |
Enabled, Disabled |
NTP |
Specifies one or more Network Time Protocol (NTP) servers. Adding one or more NTP server IP addresses enables the system NTP client on the node, and is used for system clock synchronization. |
IP address of one or more NTP servers |