The Connect core

The Connect core includes two key components:

plugins
deployments

Plugins

Plugins are a core component of the Fabric Services System Connect environment. In the Connect environment, a plugin represents the component that communicates with the external cloud services. The following plugins are supported by the Fabric Services System platform, and are further documented in their respective sections:

Plugins are automatically registered within the Connect service when they are deployed. Each is stored in the database with the following main properties:

Table 1. Plugin properites
Property	Description	Values/Range
Name	The name of the plugin.	String
Type	The type of plugin, related to the platform it supports.	String
External ID	An optional field to store an external reference.	String
Heartbeat support	Indicates whether the plugin sends regular heartbeat messages to signal its live state to Connect.	True/False
Heartbeat interval	Indicates how often the plugin should senda heartbeat message, in seconds.	Integer
Status	Indicates whether Connect: is in the process of deploying a resources has finished deploying it has encountered an error during deployment	String

For more details about the full set of available properties, see the API documentation as described in the Fabric Services System API Integration Guide.

Heartbeat

When plugins register into the Connect core service, they can indicate that they support heartbeats. When a plugin supports heartbeats, the plugin is expected to send a heartbeat to the Connect core service at an interval of the configured value (or more frequently). If the Connect core does not receive a heartbeat from the plugin after two intervals, it will raise an alarm in the Fabric Services System to indicate that there might be an issue with the plugin.

Deployments

Deployments represent the individual cloud environments that each plugin integrates with. For most plugins, there will only be a single deployment. The VMware plugin supports the integration of a single plugin with multiple vCenter servers, where each will be represented by a separate deployment.

Deployments have an Admin state, which indicates whether the plugin is allowed to make changes in the fabric for that deployment. This helps to prevent unwanted changes from plugins or deployments that have not been enabled, and are therefore in an Admin Down state.

Deployment states

A plugin can automatically create the deployments to which it belongs. Such deployments are created in an Admin Down state, and an administrator must update the deployment to an Admin Up state to enable it.

Deployments can also be created by an administrator, in which case the administrator can immediately enable the Deployment by setting it to Admin up.

Deployment properties

Deployments have the following main properties:

Table 2. Deployment properties
Property	Description	Values/Range
Name	The name of the deployment	String
Description	A description of the deployment	String
Plugin	A reference to the plugin that owns the deployment	String
External ID	An optional field to store an external reference	String
Status	Indicates whether Connect: :is in the process of deploying a resource has finished deploying it encountered an error occurred during deployment .	String
Settings	A collection of settings that depend on the type of the plugin. For a deployment of the VMware plugin, the settings will include information about the vCenter hostname, user name, and password, which are securely stored.	List

The Connect UI

The Fabric Services System UI contains a page from which you can manage the Connect deployments and view details about the Connect plugins.

The first page of the Connect UI displays a list of the Connect deployments and the relevant information for each deployment.

Clicking on the More menu for a deployment opens an action list from which you can:

change the Admin state of the plugin in a single click
open the deployment for more details
delete the deployment.

You can also use the Views drop-down list to open the Plugins view. This opens a new page that lists Connect plugins and displays the relevant information for each plugin.

Clicking on the More menu for a plugin opens an action list from which you can:

view a list of the deployment associated with that plugin
delete the plugin

Connect UI parameters

Basic deployment parameters

The following parameters are used when managing a Deployment's configuration in the Fabric Services System UI. The set of parameters will vary depending on the type of plugin the Deployment is associated with.

Table 3. Basic deployment parameters
Parameter	Description	Values/Range
Admin Up	Indicates whether the deployment should be Administratively Up, or (if false) left Administratively Down. A deployment that is Administrtively Down is not functional.	True False
Name	The name used to refer to this deployment within the Fabric Services System.	A string value
Description	Optionally, a description for this deployment.	A string value

Deployment parameters based on plugin choice

The following parameters are used in the Connect page of the Fabric Services System UI to configure a Connect deployment associated with a Connect plugin.

The set of parameters can vary from one type of plugin to another.

Table 4. Deployment parameters based on plugin choice
Parameter	OpenShift	OpenStack	VMware	Description	Values/Range
Plugin	Yes	Yes	Yes	The type of plugin associated with this deployment.	OpenShift OpenStack VMware
Host	No	No	Yes	The vCenter host.	A valid host URL, in the form (for example) vmware.example.net.
Username	No	No	Yes	The username for the vCenter user.	A string value, subject to vCenter constraints for user names.
Password	No	No	Yes	Password for the vCenter user. Note: The password characters are obscured for security purposes.	A string value, subject to vCenter constraints for passwords.
TLS Verify	No	No	Yes	Indicates whether to verify TLS with vCenter.	True False
Certificate	No	No	Yes	If TLS Verify is set to True, a TLS certificate is required here. Only a single certificate is supported for a plugin. Failing to provide a certificate, or providing an invalid certificate, triggers an certificate validation failure alarm.	A valid TLS certificate

Creating Connect deployments and plugins

Follow this procedure to create a new Connect deployment using the Connect page of the Fabric Servcies System GUI.

For the coresponding process using the API instead of the GUI, see Managing plugins and deployments.

From the main Fabric Services System menu, select Connect.
The Connect page displays, showing a list of all current Connect deployments.
Click CREATE DEPLOYMENT.
Enter the following information about the deployment as described in Basic deployment parameters:
- Admin Up
- Name
- Description
Select a value for the Plugin parameter.
Enter information about the associated plugin as described in Deployment parameters based on plugin choice:

Note: The remaining parameters may vary depending on the plugin you specified in step 4.
Click SAVE.

Managing Connect deployments and plugins

Follow these steps to view, modify, or delete a Connect deployment, or to view a list of plugins or delete a plugin.

From the main menu, select Connect.
The Connect page displays, showing a list of all current Connect deployments.
Choose one of the following:
- To view details about a particular deployment, go to step 3.
- To change the administrative state of a deployment, go to step .
- To modify details about a deployment, go to step 5.
- To delete a deployment, go to step 6.
- To view a list of plugins, go to step 7.
- To delete a plugin, go to step 8.
To view a deployment, do the following:
1. Find the deployment that you want to view and click at the end of its row.
2. Select Open from the list of actions.
  Details about the selected deployment are displayed in an overlay.
To change the administrative state of a deployment, do the following:
1. Find the deployment in the list and click at the end of its row.
2. Select Set to Admin Up or Set to Admin Down from the list of actions.
To edit a deployment, do the following:
1. Find the deployment that you want to edit and click at the end of its row.
2. Select Edit from the list of actions.
3. Modify the displayed properties as required.
  
  Note: Not all properties can be modified.
4. Click SAVE.
To delete a deployment, do the following:
1. Find the deployment that you want to delete and click at the end of its row.
2. Select Delete... from the list of actions.
3. Click OK in the confirmation dialog.
To view a list of plugins select Plugins from the Views drop-down list at the top of the page.
The list of deployments is replaced by a list of current plugins.
To delete a plugin, do the following:
1. Select Plugins from the Views drop-down list at the top of the page.
2. Find the plugin that you want to delete and click at the end of its row.
3. Select Delete... from the list of actions.
4. Click OK in the confirmation dialog.

Fabric Services System Connect workflows

In the Cloud Management mode, Connect creates a workload intent for each tenant, and a Fabric Services System subnet for each subnet that is created in the Cloud Management system. In this mode, the changes in the Cloud Management system are transparently reflected into the Fabric Services System. The administrator of the Cloud Management system does not require any knowledge about how to use the Fabric Services System.

For more advanced use cases, another type of workload intent or Fabric Services System subnet might be required. In other advanced use cases some external peering must be configured with the workload intent, or special sub-interfaces are required.

In such cases Nokia recommends using the Fabric Services System Managed mode, which instructs Connect to associate tenants and subnets with existing workload intents and subnets in the Fabric Services System respectively, instead of creating these resources in the Fabric Services System based on the cloud management networking.

In this mode, an administrator (or orchestration engine) with knowledge of the Fabric Services System first creates the necessary resources in the Fabric Services System directly. They can create more complex configurations than the cloud management system itself would be able to do. When creating the networking constructs in the Cloud Management system, the administrator provides a set of unique identifiers referring to those pre-created networking constructs. This way the Connect plugin and Connect service know not to create their own Workloads and Subnets, but to use the pre-created items.

Managing the Connect core user

Connect uses a specific pre-created Connect user to access the Fabric Services System through an internal REST API. It is not necessary to change the password of this Connect user. However, if you do change the password of this user through the UI or API of the Fabric Services System, you must perform the following procedure which includes updating the Connect pod in the Fabric Services System Kubernetes cluster.

Obtain the base64 encoding value of the new password:
```
$ echo -n 'NewPassword' | base64
Tm9raWFDuZWN0MSE=
```
Set the password with a new base64 encoded value in the Kubernetes secret file using following command and save the file:
```
$ kubectl edit secrets
                    dev-fss-connect-auth-secret
```
Upon executing the above command you will find the following section in the file, which must be updated:
```
data:
  password: <New base64 encoded value>
```
Delete the Connect pod so that Connect uses updated secret values to communicate with rest of the Fabric Services System services.