Configuration Commands

Generic Commands

alarms

Syntax

alarms

Context

config>system

Description

This command enters the context to configure facility alarm parameters.

max-cleared

Syntax

max-cleared max-alarms

Context

config>system>alarms

Description

This command configures the maximum number of cleared alarms that the system will store and display.

Default

500

Parameters

max-alarms

Specify the maximum number of cleared alarms.

shutdown

Syntax

[no] shutdown

Context

config>system>alarms

Description

This command enables or disables the Facility Alarm functionality. When enabled, the Facility Alarm sub-system tracks active and cleared facility alarms and controls the Alarm LEDs on the CPMs/CFMs. When Facility Alarm functionality is enabled, the alarms are viewed using the show system alarms command(s).

Default

no shutdown