SNMP Command Reference

Command Hierarchies

Configuration Commands

SNMP System Commands

config

—

system

—

snmp

—	engineID engine-id

—	no engineID

—	general-port port

—	no general-port

—	packet-size bytes

—	no packet-size

—

streaming

—	[no] shutdown

—	[no] shutdown

SNMP Security Commands

Refer to the 7x50 SR OS Services Guide for information about configuring SNMP in a VPRN service.

config

—

system

—

security

—

snmp

—	access group group-name security-model security-model security-level security-level [context context-name [prefix-match]] [read view-name-1] [write view-name-2] [notify view-name-3]

—	no access group group-name [security-model security-model] [security-level security-level] [context context-name [prefix-match]] [read view-name-1] [write view-name-2] [notify view-name-3

—	attempts [count] [time minutes1] [lockout minutes2]

—	no attempts

—	community community-string [hash | hash2] access-permissions [version SNMP-version] [src-access-list list-name]

—	no community community-string [hash | hash2]

—	usm-community community-string group group-name [src-access-list list-name]

—	no usm-community community-string

—	[no] src-access-list list-name

—	src-host host-name address ip-address

—	no src-host host-name

—	view view-name subtree oid-value

—	no view view-name [subtree oid-value]

—	mask mask-value [type {included | excluded}]

—

no mask

 

The following commands configure user-specific SNMP features. Refer to the Security section for CLI syntax and command descriptions.

config

—

system

—

security

—	[no] user user-name

—

[no] snmp

—	authentication {[none] | [[hash] {md5 key-1 | sha key-1} privacy {none|des-key|aes-128-cfb-key key-2}]

—	group group-name

—	[no] group

Show Commands

show

—

snmp

—

counters

—

streaming

—

counters

—

system

—	information

—

security

—	access-group [group-name]

—	authentication [statistics]

—	password-options [entry-id]

—	password-options

—	per-peer-queuing

—	profile [profile-name]

—

snmp

—	community [community-string]

—	src-access-list [list-name]

—

ssh

—	user [user-id] [detail]

—	view [view-name] [detail]