For feedback and comments:
documentation.feedback@alcatel-lucent.com

Table of Contents Previous Next PDF


Show Commands
sflow
Syntax
sflow
Context
show>sflow
Description
This command displays the primary and backup receiver statistics, the mapping configuration and a summary of how many ports and SAPs have sFlow enabled.
Show sFlow Output Fields
The following table describes show sflow output fields.
 
Displays the type of sFlow traffic statistics (unicast, multicast or broadcast) that the policer/queue maps to.
Sample Output
*B:bkvm10# show sflow 
===============================================================================
sFlow Status
===============================================================================
Receiver             	: pat
Max Data Size        	: 312
 
IP Addr Primary    	  : 138.120.142.163:6343
Packets Sent         	: 2572
Packet Errors        	: 2
Last Packet Sent     	: 07/08/2014 22:23:57nt
 
IP Addr Backup       	: N/A
Packets Sent         	: 0
Packet Errors        	: 0
Last Packet Sent     	: No Pkts sent
-----------------------------------
Counter Pollers
-----------------------------------
Port           No. of SAPs
-----------------------------------
1/1/2          3                      
1/2/1          0
-----------------------------------
No. of sFlow counter pollers: 2
-----------------------------------
--------------------------------------------------
Counter Mappings
--------------------------------------------------
Direction      Policer/Queue  Traffic Type
--------------------------------------------------
egress         queue 1        unicast
egress         queue 5        multicast
egress         queue 8        broadcast
ingress        policer 1      unicast
ingress        policer 6      multicast
ingress        policer 12     broadcast
--------------------------------------------------
No. of sFlow counter mappings: 6
--------------------------------------------------
===============================================================================