Card, MDA, and Port Command Reference

Command Hierarchies

 

Card and MDA Configuration Commands

•	Hardware Commands

→	Card Commands

→	MDA Commands

→	MCM Commands

→	Forwarding Plane (FP) Commands

•	Port Configuration Commands

•	Port APS Commands

•	Ethernet Commands

•	Multilink Bundle Commands

•	SONET/SDH Commands

•	SONET Path ATM Commands

•	TDM Commands

•	DS1 Commands

•	DS3 Commands

•	E1 Commands

•	E3 Commands

•	LAG Commands

•	Ethernet Tunnel Commands

•	Multi-Chassis Redundancy Commands

•	Show Commands

•	Clear Commands

•	Debug Commands

•	Tools Commands

 

 

Hardware Commands

Card Commands

config

—	[no] card slot-number

—	capability {sr | ess} [now]

—	card-type card-type

—	no card-type

—	[no] fail-on-error

—	[no] named-pool-mode

MCM Commands

—	[no] mcm mcm-slot

—	mcm-type mcm-type

—	no mcm-type

—	[no] shutdown

MDA Commands

—	[no] card slot-number

—	[no] mda mda-slot

—

access

—

egress

—	[no] pool [name]

—	amber-alarm-threshold percentage

—	no amber-alarm-threshold

—	red-alarm-threshold percentage

—	no red-alarm-threshold

—	resv-cbs percent-or-default amber-alarm-action step percent max [1..100]

—	resv-cbs percent-or-default

—	no resv-cbs

—	slope-policy name

—	no slope-policy

—

ingress

—	[no] pool [name]

—	amber-alarm-threshold percentage

—	no amber-alarm-threshold

—	red-alarm-threshold percentage

—	no red-alarm-threshold

—	resv-cbs percent-or-default amber-alarm-action step percent max [1..100]

—	resv-cbs percent-or-default

—	no resv-cbs

—	slope-policy name

—	no slope-policy

—	clock-mode adaptive

—	clock-mode differential [timestamp-freq {19440 | 77760 | 103680}]

—

egress

—	hi-bw-mcast-src [alarm] [group group-id]

—	no hi-bw-mcast-src

—	egress-xpl

—	threshold threshold

—	window window

—	[no] fail-on-error

—

ingress

—	mcast-path-management

—	ancillary-override

—	path-limit megabits-per-second

—	no path-limit

—	bandwidth-policy policy-name

—	no bandwidth-policy

—	primary-override

—	path-limit megabits-per-second

—	no path-limit

—	secondary-override

—	path-limit megabits-per-second

—	no path-limit

—	[no] shutdown

—	scheduler-policy hsmda-scheduler-policy-name

—	no scheduler-policy

—	ingress-xpl

—	threshold threshold

—	window window

—	mda-type mda-type

—	no mda-type

—	named-pool-mode

—

egress

—	named-pool-policy policy-name

—	no named-pool-policy

—

ingress

—	named-pool-policy policy-name

—	no named-pool-policy

—

network

—

egress

—	[no] pool [name]

—	amber-alarm-threshold percentage

—	no amber-alarm-threshold

—	red-alarm-threshold percentage

—	no red-alarm-threshold

—	resv-cbs percent-or-default amber-alarm-action step percent max [1..100]

—	resv-cbs percent-or-default

—	no resv-cbs

—	slope-policy name

—	no slope-policy

—

ingress

—	[no] pool [name]

—	amber-alarm-threshold percentage

—	no amber-alarm-threshold

—	red-alarm-threshold percentage

—	no red-alarm-threshold

—	resv-cbs percent-or-default amber-alarm-action step percent max [1..100]

—	resv-cbs percent-or-default

—	no resv-cbs

—	slope-policy name

—	no slope-policy

—	queue-policy name

—	no queue-policy

—	[no] shutdown

—	[no] sync-e

—	[no] shutdown

—	[no] named-pool-mode [now]

Virtual Scheduler Commands

—	[no] card slot-number

—	virtual-scheduler-adjustment

—	rate-calc-min-int [fast-queue percent-of-default] [slow-queue percent-of-default]

—	no rate-calc-min-int

—	sched-run-min-int percent-of-default

—	no sched-run-min-int

—	task-scheduling-int percent-of-default

—	no task-scheduling-int

—	slow-queue-thresh kilobits-per-second

—	no slow-queue-thresh

 

Forwarding Plane (FP) Commands

config

—

card

—	fp [fp-number]

—	dist-cpu-protection policy-name

—	no dist-cpu-protection

—

egress

—	wred-queue-control

—	buffer-allocation min percentage max percentage

—	no buffer-allocation

—	resv-cbs min percentage max percentage

—	no resv-cbs

—	[no] shutdown

—	slope-policy slope-policy-name

—	no slope-policy

—	hi-bw-mcast-src [alarm] [group group-id] [default-paths-only]

—	no hi-bw-mcast-src

—

ingress

—

access

—	queue-group queue-group-name instance instance-id [create]

—	accounting-policy policy-name

—	no accounting-policy

—	[no] collect-stats

—	description long-description-string

—	no description

—	policer-control-policy policy-name

—	no policer-control-policy

—	max-rate {rate | max}

—	priority-mbs-thresholds

—	min-thresh-separation size [bytes | kilobytes]

—	[no] priority level

—	mbs-contribution [bytes | kilobytes]

—	[no] policer-override

—	policer policer-id [create]

—	no policer policer-id

—	stat-mode {no-stats | minimal | offered-profile-no-cir | offered-priority-no-cir | offered-limited-profile-cir | offered-profile-cir | offered-priority-cir|offered-total-cir | offered-profile-capped-cir | offered-limited-capped-cir}

—	no stat-mode

—	rate {max | kilobits-per-second} [cir {max | kilobits-per-second}]

—

no rate

—	mbs {size [bytes | kilobytes] | default}

—

no mbs

—	cbs {size [bytes | kilobytes] | default}

—

no cbs

—	packet-byte-offset {add bytes | subtract bytes}

—	no packet-byte-offset

—	ingress-buffer-allocation hundredths-of-a-percent

—	no ingress-buffer-allocation

—	mcast-path-management

—	bandwidth-policy policy-name

—	no bandwidth-policy

—	[no] shutdown

—

network

—	queue-group queue-group-name instance instance-id

—	no queue-group

—	accounting-policy acct-policy-id

—	no accounting-policy

—	[no] collect-stats

—	description description-string

—	no description

—	policer-control-policy policy-name

—	no policer-control-policy

—	priority-mbs-thresholds

—	min-thresh-separation size [bytes | kilobytes]

—	[no] priority level

—	mbs-contribution size [bytes | kilobytes]

—	[no] policer-override

—	policer policer-id [create]

—	no policer policer-id

—	stat-mode {no-stats | minimal | offered-profile-no-cir | offered-priority-no-cir | offered-limited-profile-cir | offered-profile-cir | offered-priority-cir|offered-total-cir | offered-profile-capped-cir | offered-limited-capped-cir}

—	no stat-mode

—	rate {max | kilobits-per-second} [cir {max | kilobits-per-second}]

—

no rate

—	mbs {size [bytes | kilobytes] | default}

—

no mbs

—	cbs {size [bytes | kilobytes] | default}

—

no cbs

—	packet-byte-offset{add bytes | subtract bytes}

—	packet-byte-offset

—	[no] stable-pool-sizing

—

mda

—

ingress

—	mcast-path-management

—	ancillary-override

—	path-limit megabits-per-second

—	no path-limit

—	bandwidth-policy policy-name

—	no bandwidth-policy

—	primary-override

—	path-limit megabits-per-second

—	no path-limit

—	secondary-override

—	path-limit megabits-per-second

—	no path-limit

—	[no] shutdown

 

 

tools

—

dump

—	mcast-path-mgr

—

cpm

 

Port Configuration Commands

 

config

Port Configuration Commands

—	port {port-id | bundle-id | bpgrp-id | aps-id}

—	no port {bundle-id | bpgrp-id | aps-id}

—

access

—

egress

—	[no] pool [name]

—	amber-alarm-threshold percentage

—	no amber-alarm-threshold

—	red-alarm-threshold percentage

—	no red-alarm-threshold

—	resv-cbs percent-or-default amber-alarm-action step percent max [1..100]

—	resv-cbs percent-or-default

—	no resv-cbs

—	slope-policy name

—	no slope-policy

—

ingress

—	[no] pool [name]

—	amber-alarm-threshold percentage

—	no amber-alarm-threshold

—	red-alarm-threshold percentage

—	no red-alarm-threshold

—	resv-cbs percent-or-default amber-alarm-action step percent max [1..100]

—	resv-cbs percent-or-default

—	no resv-cbs

—	slope-policy name

—	no slope-policy

—	[no] ddm-events

—	description long-description-string

—	no description

—

dwdm

—

amplifier

—	report-alarms [ild] [tmp] [mth] [mtl] [los] [lop] [com]

—	channel channel

—

coherent

—	channel channel

—	cpr-window-size window-size

—	dispersion dispersion

—	mode {automatic|manual}

—	report-alarms [modflt] [mod] [netrx] [nettx] [hosttx]

—	rx-los-thresh threshold

—	sweep start dispersion-start end dispersion-end

—	target-power power

—	[no] rxdtv-adjust

—

tdcm

—

channel

—	dispersion dispersion

—	mode {automatic | manual}

—	report-alarms [nrdy] [mth] [mtl] [unlck] [tlim] [einv] [com]

—	sweep start dispersion-start end dispersion-end

—	wavetracker

—	encode wave-key key2 wave-key

—

no encode

—	[no] power-control

—	target-power dBm

—	[no] report-alarm [encode-fail] [encode-degrade] [power-fail] [power-degrade] [power-high] [power-low]

—	xgig {lan | wan}

—	hybrid-buffer-allocation

—	ing-weight access access-weight network network-weight

—	no ing-weight

—	egr-weight access access-weight network network-weight

—	no egr-weight

—	modify-buffer-allocation-rate

—	ing-percentage-of-rate rate-percentage

—	no ing-percentage-of-rate

—	egr-percentage-of-rate rate-percentage

—	no egr-percentage-of-rate

—	named-pool-mode

—

egress

—	named-pool-policy policy-name

—	no named-pool-policy

—

ingress

—	named-pool-policy policy-name

—	no named-pool-policy

—

network

—

egress

—	[no] pool [name]

—	amber-alarm-threshold percentage

—	no amber-alarm-threshold

—	red-alarm-threshold percentage

—	no red-alarm-threshold

—	resv-cbs percent-or-default amber-alarm-action step percent max [1..100]

—	resv-cbs percent-or-default

—	no resv-cbs

—	slope-policy name

—	no slope-policy

—

[no] otu

—	[no] async-mapping

—	fec {enhanced | g709}

—

no fec

—	otu2-lan-data-rate {11.049 | 11.0957}

—

pm-tti

—	expected auto-generated

—	expected bytes byte [byte...(up to 64 max)]

—	expected string identifier

—	expected use-rx

—	mismatch-reaction {squelch-rx}

—	no mismatch-reaction

—	tx auto-generated

—	tx bytes bytes [bytes...(up to 64 max)]

—	tx string identifier

—

no tx

—	psi-payload

—	expected bytes byte

—	expected auto

—	mismatch-reaction {squelch-rx}

—	no mismatch-reaction

—

tx byte

—

tx auto

—	[no] psi-tti

—	expected auto-generated

—	expected bytes byte [byte...(up to 64 max)]

—	expected string identifier

—	expected use-rx

—	mismatch-reaction {squelch-rx}

—	no mismatch-reaction

—	tx auto-generated

—	tx bytes bytes [bytes...(up to 64 max)]

—	tx string identifier

—

no tx

—	[no] report-alarms [loc] [los] [lof] [lom] [otu-ais] [otu-ber-sf] [otu-ber-sd] [otu-bdi] [otu-tim] [otu-iae] [otu-biae] [fec-sf] [fec-sd] [fec-fail] [fec-uncorr] [odu-ais] [odu-oci] [odu-lck] [odu-bdi] [odu-tim] [opu-tim] [opu-plm]

—	sf-sd-method {bip8 | fec}

—	sf-threshold threshold

—	sd-threshold threshold

—

sm-tti

—	expected auto-generated

—	expected bytes byte [byte...(up to 64 max)]

—	expected string identifier

—	expected use-rx

—	mismatch-reaction {squelch-rx}

—	no mismatch-reaction

—	tx {auto-generated | string identifier | bytes byte1 [byte2...(up to 64 bytes)]}

—

no tx

—	[no] shutdown

 

Port APS Commands

config

—	[no] port {aps-id}

—

aps

—	advertise-interval advertise-interval

—	no advertise-interval

—	hold-time hold-time

—	no hold-time

—	hold-time-aps [lsignal-failure sf-time][lsignal-degrade sd-time]

—	no hold-time-aps

—	no mode-annexb

—	neighbor ip-address

—	no neighbor

—	protect-circuit port-id

—	no protect-circuit

—	rdi-alarms [suppress | circuit]

—	revert-time minutes

—	no revert-time

—	switching-mode {bi-directional | uni-directional | uni-1plus1}

—	working-circuit port-id [number number]

—	no working-circuit

—	wtr-annexb minute

 

Ethernet Commands

config

—	[no] port {port-id}

—

ethernet

—

access

—

egress

—	queue-group queue-group-name [instance instance-id]

—	no queue-group queue-group-name

—	accounting-policy acct-policy-id

—	no accounting-policy

—	[no] agg-rate

—	[no] limit-unused-bandwidth

—	[no] queue-frame-based-accounting

—	rate {max | rate}

—

no rate

—	[no] collect-stats

—	description description-string

—	no description

—	queue-overrides

—	queue queue-id [create]

—	no queue queue-id

—	parent [[weight weight] [cir-weight cir-weight]]

—

no parent

—	adaptation-rule [pir {max | min | closest}] [cir {max | min | closest}]

—	no adaptation-rule

—	burst-limit {default | size [byte | kilobyte]}

—	no burst-limit

—	cbs size-in-kbytes

—

no cbs

—	high-prio-only percent

—	no high-prio-only

—	mbs size-in-kbytes

—

no mbs

—	monitor-depth

—	[no] monitor-depth

—	rate pir-rate [cir cir-rate]

—

no rate

—	scheduler-policy scheduler-policy-name

—	no scheduler-policy

—	scheduler-policy

—	policer-control-policy

—	no policer-control-policy

—	vport name [create]

—	no vport name

—	agg-rate agg-rate

—	[no] agg-rate

—	rate {max | rate}

—

no rate

—	[no] limit-unused-bandwidth

—	description description-string

—	no description

—	[no] egress-rate-modify

—	host-match dest description-string [create]

—	no host-match destination-string

—	mon-port-sch

—	no mon-port-sch

—	port-scheduler-policy port-scheduler-policy-name

—	no port-scheduler-policy

—

ingress

—	queue-group queue-group-name [create]

—	no queue-group queue-group-name

—	accounting-policy acct-policy-id

—	no accounting-policy

—	[no] collect-stats

—	description description-string

—	no description

—	queue-overrides

—	queue queue-id [create]

—	no queue queue-id

—	adaptation-rule [pir {max | min | closest}] [cir {max | min | closest}]

—	no adaptation-rule

—	burst-limit {default | size [byte | kilobyte]}

—	no burst-limit

—	cbs size-in-kbytes

—

no cbs

—	high-prio-only percent

—	no high-prio-only

—	mbs size-in-kbytes

—

no mbs

—	monitor-depth

—	[no] monitor-depth

—	rate pir-rate [cir cir-rate]

—

no rate

—	scheduler-policy scheduler-policy-name

—	no scheduler-policy

—	autonegotiate [limited]

—	no autonegotiate

—	[no] collect-stats

—	crc-monitor

—	sd-threshold threshold [multiplier multiplier]

—	no sd-threshold

—	sf-threshold threshold [multiplier multiplier]

—	no sf-threshold

—	window-size seconds

—	no window-size

—	dot1q-etype 0x0600..0xffff

—	no dot1q-etype

—

dot1x

—	max-auth-req max-auth-request

—	port-control {auto | force-auth | force-unauth}

—	quiet-period seconds

—	radius-plcy name

—	no radius-plcy

—	re-auth-period seconds

—	no re-auth-period

—	[no] re-authentication

—	server-timeout seconds

—	no server-timeout

—	supplicant-timeout seconds

—	no supplicant-timeout

—	transmit-period seconds

—	no transmit-period

—

tunneling

—	no tunneling

—	[no] down-on-internal-error

—	down-when-looped

—	keep-alive timer

—	no keep-alive

—	retry-timeout timer

—	no retry-timeout

—	[no] shutdown

—	[no] use-broadcast-address

—	duplex {full | half}

—

efm-oam

—	[no] accept-remote-loopback

—

discovery

—	advertise-capability

—	link-monitoring

—	[no] link-monitoring

—	[no] grace-tx-enable

—	hold-time time-value

—	no hold-time

—	[no] ignore-efm-state

—	link-monitoring

—	errored-frame

—	[no] event-notification

—	sd-threshold errored-frames

—	no sd-threshold

—	sf-threshold errored-frames

—	[no] shutdown

—	window deciseconds

—	errored-frame-period

—	[no] event-notification

—	sd-threshold errored-frames

—	no sd-threshold

—	sf-threshold errored-frames

—	[no] shutdown

—	window packets

—	errored-frame-seconds

—	[no] event-notification

—	sd-threshold errored-seconds

—	no sd-threshold

—	sf-threshold errored-seconds

—	[no] shutdown

—	window deciseconds

—	errored-symbols

—	[no] event-notification

—	sd-threshold errored-symbols

—	no sd-threshold

—	sf-threshold errored-symbols

—	[no] shutdown

—	window deciseconds

—	local-sf-action

—	event-notification-burst packets

—	info-notification

—	[no] dying-gasp

—	[no] critical-event

—	local-port-action {log-only | out-of-service}

—	[no] shutdown

—	mode {active | passive}

—	peer-rdi-rx

—	critical-event local-port-action {log-only | out-of-service}

—	dying-gasp local-port-action {log-only | out-of-service}

—	event-notification local-port-action {log-only | out-of-service}

—	link-fault local-port-action {log-only |out-of-service}

—	[no] shutdown

—	[no] transmit-interval interval [multiplier multiplier]

—	[no] tunneling

—

egress

—	[no] exp-secondary-shaper

—	rate {max | kilobits-per-second}

—

no rate

—	class class-number rate {kilobits-per-second | max} [monitor-threshold size-in-kilobytes]

—

no class

—	low-burst-max-class class

—	no low-burst-max-class

—	egress-rate sub-rate

—	no egress-rate

—	[no] egress-scheduler-override

—	level priority-level rate pir-rate [cir cir-rate]

—	no level priority-level

—	max-rate rate

—	no max-rate

—	egress-scheduler-policy port-scheduler-policy-name

—	no egress-scheduler-policy

—

elmi

—	mode {none|uni-n}

—	n393 [2..10]

—

no n393

—	t391 [5..30]

—

no t391

—	t392 [5..30]

—

no t392

—	encap-type

—	encap-type {dot1q | null | qinq}

—	no encap-type

—

eth-cfm

—	[no] mep mep-id domain md-index association ma-index [vlan vlan-id]

—	[no] ais-enable

—	client-meg-level [level [level ...]]

—	no client-meg-level

—	interval {1|60}

—	no interval

—	priority priority-value

—	no priority

—	[no] ccm-enable

—	ccm-ltm-priority priority

—	no ccm-ltm-priority

—	ccm-padding-size ccm-padding

—	no ccm-padding-size

—	ccm-tlv-ignore [port-status] [interface-status]

—	no ccm-tlv-ignore

—	collect-lmm-stats

—	no collect-lmm-stats

—	description description-string

—	no description

—	[no] eth-test-enable

—	bit-error-threshold bit-errors

—	test-pattern {all-zeros|all-ones} [crc-enable]

—	no test-pattern

—	[no] facility-fault

—	low-priority-defect {allDef|macRemErrXcon|remErrXcon|errXcon|xcon|noXcon}

—	mac-address mac-address

—	no mac-address

—	one-way-delay-threshold seconds

—	[no] shutdown

—	hold-time {[up hold-time up] [down hold-time down] [seconds| centiseconds]}

—	no hold-time

—	[no] hsmda-scheduler-overrides

—	group group-id rate rate

—	no group group-id

—	max-rate rate

—	no max-rate

—	scheduling-class class rate rate

—	scheduling-class class weight weight-in-group

—	no scheduling-class class

—	ingress-rate ingress-rate

—	no ingress-rate

—	[no] lacp-tunnel

—

lldp

—	dest-mac {nearest-bridge | nearest-non-tpmr | nearest-customer}

—	admin-status {rx | tx | tx-rx | disabled}

—	[no] notification

—	portid-subtype {tx-if-alias | tx-if-name | tx-local}

—	[no] tunnel-nearest-bridge

—	tx-mgmt-address [system] [system-ipv6]

—	no tx-mgmt-address

—	tx-tlvs [port-desc] [sys-name] [sys-desc] [sys-cap]

—	no tx-tlvs

—	load-balancing-algorithm option

—	no load-balancing-algorithm

—	mac ieee-address

—

no mac

—	mode {access | network | hybrid}

—

no mode

—	mtu mtu-bytes

—

no mtu

—

network

—	accounting-policy policy-id

—	no accounting-policy

—	[no] collect-stats

—

egress

—	queue-group queue-group-name [instance instance id] [create]

—	no queue-group queue-group-name

—	accounting-policy acct-policy-id

—	no accounting-policy

—	agg-rate kilobits-per-second [queue-frame-based-accounting]

—	no agg-rate

—	rate {max | rate}

—

no rate

—	[no] limit-unused-bandwidth

—	[no] collect-stats

—	description description-string

—	no description

—	host-match dest destination-string [create]

—	no host-match dest destination-string

—	queue-overrides

—	queue queue-id [create]

—	no queue queue-id

—	adaptation-rule [pir {max | min | closest}] [cir {max | min | closest}]

—	no adaptation-rule

—	burst-limit

—	[no] burst-limit

—	cbs size-in-kbytes

—

no cbs

—	high-prio-only percent

—	no high-prio-only

—	mbs size-in-kbytes

—

no mbs

—	[no] monitor-depth

—	rate pir-rate [cir cir-rate]

—

no rate

—	scheduler-policy scheduler-policy-name

—	no scheduler-policy

—	policer-control-policy policy-name

—	queue-policy name

—	no queue-policy

—	pbb-etype [0x0600..0xffff]

—	no pbb-etype

—	qinq-etype 0x0600..0xffff

—	no qinq-etype

—	[no] report-alarm [signal-fail] [remote] [local] [no-frame-lock]

—	[no] sflow

—	[no] single-fiber

—	speed {10 | 100 | 1000}

—

ssm

—	[no] shutdown

—	code-type {sonet | sdh}

—	no code-type

—	[no] tx-dus

—	symbol-monitor

—	sd-threshold threshold [multiplier multiplier]

—	no sd-threshold

—	sf-threshold threshold [multiplier multiplier]

—	no sf-threshold

—	[no] shutdown

—	window-size seconds

—	no window-size

—	xgig {lan | wan}

 

Interface Group Handler Commands

config

—	[no] interface-group-handler group-id

—	[no] member portid

—	threshold min

—	no threshold

Multilink Bundle Commands

config

—	[no] port {bundle-id}

—	multilink-bundle

—	fragment-threshold fragment-threshold

—	fragment-threshold unlimited

—	no fragment-threshold

—

ima

—

atm

—	cell-format cell-format

—	min-vp-vpi value

—	link-delay {activate | deactivate} milli-seconds

—	no link-delay {activate | deactivate}

—	max-bandwidth number-links

—	no max-bandwidth

—	test-pattern-procedure

—	[no] shutdown

—	test-link port-id

—	no test-link

—	test-pattern pattern

—	no test-pattern

—	version IMA-version

—	no version

—	[no] interleave-fragments

—	[no] member port-id

—	minimum-links minimum-links

—	no minimum-links

—

mlfr

—	ack-timeout seconds

—	no ack-timeout

—

egress

—	qos-profile profile-id

—	no qos-profile

—	frame-relay

—	lmi-type {ansi | itu | none | rev1}

—	mode {dce | dte | bidir}

—	n391dte intervals

—	n392dce threshold

—	n392dte threshold

—	n393dce count

—	n393dte count

—	t391dte keepalive

—	t392dce keepalive

—	hello-timeout seconds

—	no hello-timeout

—	[no] identifier bundle-id-string

—

ingress

—	qos-profile profile-id

—	no qos-profile

—	retry-limit integer

—	no retry-limit

—

mlppp

—

egress

—	qos-profile profile-id

—	no qos-profile

—	endpoint-discriminator class {ip-address | global-mac-address} [discriminator-id discriminator-id]

—	no endpoint-discriminator

—

ingress

—	qos-profile profile-id

—	no qos-profile

—	[no] magic-number

—	multiclass count

—	no multiclass

—	[no] stateless-aps-switchover

—

mrru mrru

—

no mrru

—	[no] protect-bundle

—	red-differential-delay red-diff-delay [down]

—	no red-differential-delay

—	[no] short-sequence

—	[no] working-bundle

—	yellow-differential-delay yellow-diff-delay

—	no yellow-differential-delay

 

SONET-SDH Commands

SONET/SDH Commands

config

—	[no] port {port-id}

—

sonet-sdh

—	clock-source {loop-timed | node-timed}

—	framing {sonet | sdh}

—	group sonet-sdh-index payload {tu3 | vt2 | vt15}

—	hold-time hold-time {[up hold-time up] [down hold-time down]}

—	no hold-time

—	loopback {line | internal}

—	no loopback

—	[no] path [sonet-sdh-index]

—

access

—

egress

—	vport name [create]

—	no vport name

—	agg-rate agg-rate

—	[no] agg-rate

—	rate {max | rate}

—

no rate

—	[no] limit-unused-bandwidth

—	[no] queue-frame-based-accounting

—	description description-string

—	no description

—	[no] egress-rate-modify

—	host-match dest description-string [create]

—	no host-match destination-string

—	port-scheduler-policy port-scheduler-policy-name

—	no port-scheduler-policy

SONET Path ATM Commands

—

atm

—	cell-format cell-format

—	ilmi [vpi/vci]

—

no ilmi

—

egress

—	traffic-desc traffic-desc-profile-id

—	no traffic-desc

—

ingress

—	traffic-desc traffic-desc-profile-id

—	no traffic-desc

—	keep-alive [poll-frequency seconds] [poll-count value] [test-frequency seconds]

—	no keep-alive

—	protocol protocol-type

—	no protocol

—	[no] shutdown

—	min-vp-vpi value

—	cisco-hdlc

—	down-count down-count

—	no down-count

—	keepalive time-interval

—	no keepalive

—	up-count up-count

—	no up-count

—	crc {16 | 32}

—	description description

—	no description

—	[no] egress-scheduler-override

—	level priority-level rate pir-rate [cir cir-rate]

—	no level priority-level

—	max-rate rate

—	no max-rate

—	egress-scheduler-policy port-scheduler-policy-name

—	no egress-scheduler-policy

—	encap-type {atm | bcp-null | bcp-dot1q | ipcp | ppp-auto | frame-relay | wan-mirror | cisco-hdlc}

—	frame-relay

—	[no] frf-12

—

egress

—	qos-profile profile-id

—	no qos-profile

—	fragment-threshold threshold

—	no fragment-threshold

—	lmi-type {ansi | itu | none | rev1}

—	mode {dce | dte | bidir}

—	n391dte intervals

—	no n391dte

—	n392dce threshold

—	no n392dce

—	n392dte threshold

—	no n392dte

—	n393dce count

—	no n393dce

—	n393dte count

—	no n393dte

—	t391dte keepalive

—	no t391dte

—	t392dce keepalive

—	no t392dce

—	mac ieee-address

—

no mac

—	mode {access | network | hybrid}

—

mtu mtu

—

no mtu

—

network

—	accounting-policy policy-id

—	no accounting-policy

—	[no] collect-stats

—	queue-policy name

—	no queue-policy

—	payload {sts3 | tug3 | ds3 | e3 | vt2 | vt15 | ds1 | e1}

—

ppp

—	keepalive time-interval [dropcount drop-count]

—	no keepalive

—	[no] report-alarm [pais] [plop] [prdi] [pplm] [prei] [puneq] [plcd]

—	[no] scramble

—	[no] shutdown

—	signal-label value

—	no signal-label

—	trace-string [trace-string]

—	no trace-string

—	[no] report-alarm [loc] [lais] [lrdi] [ss1f] [lb2er-sd] [lb2er-sf] [slof][slos] [lrei]

—	[no] reset-port-on-path-down

—	section-trace {increment-z0 | byte value | string string}

—	[no] single-fiber

—	speed {oc3 | oc12}

—

no speed

—	[no] suppress-lo-alarm

—	threshold {ber-sd | ber-sf} rate threshhold-rate

—	no threshold {ber-sd | ber-sf}

—	[no] tx-dus

TDM Commands

 

config

—	[no] port {port-id}

—

tdm

—	buildout {long | short}

DS1 Commands

—	[no] ds1 ds1-id

—	bert {2e3 | 2e9 | 2e11 | 2e15 | 2e20 | 2e20q | 2e23 | ones | zeros | alternating} duration duration

—

no bert

—	bit-error-insertion rate

—	no bit-error-insertion

—	[no] channel-group channel-group

—

atm

—	cell-format cell-format

—	min-vp-vpi value

—	cisco-hdlc

—	down-count down-count

—	no down-count

—	keepalive time-interval

—	no keepalive

—	up-count up-count

—	no up-count

—	crc {16 | 32}

—	[no] description description-string

—	[no] egress-scheduler-override

—	level priority-level rate pir-rate [cir cir-rate]

—	no level priority-level

—	max-rate rate

—	no max-rate

—	egress-scheduler-policy port-scheduler-policy-name

—	[no] encap-type {atm | bcp-null | bcp-dot1q | ipcp | ppp-auto | frame-relay | wan-mirror | cisco-hdlc | cem}

—	frame-relay

—	[no] frf-12

—

egress

—	qos-profile profile-id

—	no qos-profile

—	fragment-threshold threshold

—	no fragment-threshold

—	[no] identifier frf16-link-id-string

—	lmi-type {ansi | itu | none | rev1}

—	mode {dce | dte | bidir}

—	n391dte intervals

—	no n391dte

—	n392dce threshold

—	no n392dce

—	n392dte threshold

—	no n392dte

—	n393dce count

—	no n393dce

—	n393dte count

—	no n393dte

—	t391dte keepalive

—	no t391dte

—	t392dce keepalive

—	no t392dce

—	idle-cycle-flag {flags | ones}

—	no idle-cycle-flag

—	idle-payload-fill {all-ones}

—	idle-payload-fill pattern pattern

—	no idle-payload-fill

—	idle-signal-fill {all-ones}

—	idle-signal-fill pattern pattern

—	no idle-signal-fill

—	load-balancing-algorithm option

—	no load-balancing-algorithm

—	mac ieee-address

—

no mac

—	[no] mode {access | network}

—	mtu mtu-bytes

—

no mtu

—

network

—	accounting-policy policy-id

—	no accounting-policy

—	[no] collect-stats

—	queue-policy name

—	no queue-policy

—

ppp

—	[no] ber-sf-link-down

—	compress {acfc [pfc] | pfc [acfc]}

—	no compress

—	keepalive time-period [dropcount drop count]

—	no keepalive

—	[no] scramble

—	[no] shutdown

—	speed {56 | 64}

—	timeslots timeslots

—	no timeslots

—	clock-source {loop-timed | node-timed | adaptive | differential}

—	framing (DS-1) {esf | sf | ds1-unframed}

—	insert-single-bit-error

—	[no] invert-data

—	loopback {line | internal | fdl-ansi | fdl-bellcore | payload-ansi | inband-ansi | inband-bellcore}

—	no loopback

—	[no] remote-loop-respond

—	[no] report-alarm [ais] [los] [oof] [rai] [looped]

—	[no] shutdown

—	signal-mode {cas}

—	no signal-mode

—	threshold {ber-sd | ber-sf} rate {1 | 5 | 10 | 50 | 100}

—	no threshold {ber-sd | ber-sf}

—	hold-time hold-time {[up hold-time up] [down hold-time down]}

—	no hold-time

—	lbo [0dB | -7.5dB | -15.0dB | -22.5dB]

—	length {133 | 266 | 399 | 533 | 655}

DS3 Commands

—	[no] ds3 [sonet-sdh-index]

—

atm

—	cell-format cell-format

—	mapping mapping

—	min-vp-vpi value

—	bert {2e3 | 2e9 | 2e11 | 2e15 | 2e20 | 2e20q | 2e23 | ones | zeros | alternating} duration duration

—

no bert

—	bit-error-insertion rate

—	no bit-error-insertion

—	channelized {ds1 | e1}

—	no channelized

—	cisco-hdlc

—	down-count down-count

—	no down-count

—	keepalive time-interval

—	no keepalive

—	up-count up-count

—	no up-count

—	clock-source {loop-timed | node-timed}

—	crc {16 | 32}

—	description description-string

—	no description

—	[no] egress-scheduler-override

—	level priority-level rate pir-rate [cir cir-rate]

—	no level priority-level

—	max-rate rate

—	no max-rate

—	egress-scheduler-policy port-scheduler-policy-name

—	no egress-scheduler-policy

—	encap-type {atm | bcp-null | bcp-dot1q | ipcp | ppp-auto | frame-relay | wan-mirror | cisco-hdlc | cem}

—	[no] feac-loop-respond

—	frame-relay

—	[no] frf-12

—

egress

—	qos-profile profile-id

—	no qos-profile

—	fragment-threshold threshold

—	no fragment-threshold

—	lmi-type {ansi | itu | none | rev1}

—	mode {dce | dte | bidir}

—	n391dte intervals

—	no n391dte

—	n392dce threshold

—	no n392dce

—	n392dte threshold

—	no n392dte

—	n393dce count

—	no n393dce

—	n393dte count

—	no n393dte

—	t391dte keepalive

—	no t391dte

—	t392dce keepalive

—	no t392dce

—	framing (DS3) {c-bit | m23}

—	idle-cycle-flag {flags | ones}

—	load-balancing-algorithm option

—	no load-balancing-algorithm

—	loopback {line | internal | remote}

—	no loopback

—	mac ieee-address

—

no mac

—	mdl {eic | lic | fic | unit | pfi | port | gen} mdl-string

—	no mdl [eic | lic | fic | unit | pfi | port | gen]

—	mdl-transmit {path | idle-signal | test-signal}

—	no mdl-transmit [path | idle-signal | test-signal]

—	mode {access | network}

—	mtu mtu-bytes

—

no mtu

—

network

—	accounting-policy policy-id

—	no accounting-policy

—	[no] collect-stats

—	queue-policy name

—	no queue-policy

—

ppp

—	keepalive time-period [dropcount drop-count]

—	no keepalive

—	[no] report-alarm [ais] [los] [oof] [rai] [looped]

—	[no] scramble

—	[no] shutdown

—	subrate {digital-link | larscom} rate-step

—	no subrate

E1 Commands

—	[no] e1 [e1-id]

—	bert {2e3 | 2e9 | 2e11 | 2e15 | 2e20 | 2e20q | 2e23 | ones | zeros | alternating} duration duration

—

no bert

—	bit-error-insertion rate

—	no bit-error-insertion

—	[no] channel-group channel-group-id

—

atm

—	cell-format cell-format

—	min-vp-vpi value

—	cisco-hdlc

—	down-count down-count

—	no down-count

—	keepalive time-interval

—	no keepalive

—	up-count up-count

—	no up-count

—	crc {16 | 32}

—	description description-string

—	no description

—	[no] egress-scheduler-override

—	level priority-level rate pir-rate [cir cir-rate]

—	no level priority-level

—	max-rate rate

—	no max-rate

—	egress-scheduler-policy port-scheduler-policy-name

—	[no] encap-type {atm | bcp-null | bcp-dot1q | ipcp | ppp-auto | frame-relay | wan-mirror | cisco-hdlc | cem}

—	frame-relay

—	[no] frf-12

—

egress

—	qos-profile profile-id

—	no qos-profile

—	fragment-threshold threshold

—	no fragment-threshold

—	[no] identifier frf16-link-id-string

—	lmi-type {ansi | itu | none | rev1}

—	mode {dce | dte | bidir}

—	n391dte intervals

—	no n391dte

—	n392dce threshold

—	no n392dce

—	n392dte threshold

—	no n392dte

—	n393dce count

—	no n393dce

—	n393dte count

—	no n393dte

—	t391dte keepalive

—	no t391dte

—	t392dce keepalive

—	no t392dce

—	idle-cycle-flag {flags | ones}

—	idle-payload-fill {all-ones}

—	idle-payload-fill pattern pattern

—	no idle-payload-fill

—	idle-signal-fill {all-ones}

—	idle-signal-fill pattern pattern

—	no idle-signal-fill

—	load-balancing-algorithm option

—	no load-balancing-algorithm

—	mac ieee-address

—

no mac

—	[no] mode {access | network}

—	mtu mtu-bytes

—

no mtu

—

network

—	accounting-policy policy-id

—	no accounting-policy

—	[no] collect-stats

—	queue-policy name

—	no queue-policy

—

ppp

—	[no] ber-sf-link-down

—	keepalive time-period [dropcount drop count]

—	no keepalive

—	[no] scramble

—	[no] shutdown

—	speed {56 | 64}

—	timeslots timeslots

—	no timeslots

—	clock-source {loop-timed | node-timed | adaptive | differential}

—	framing (E-1) {no-crc-g704 | g704 | e1-unframed}

—	insert-single-bit-error

—	[no] invert-data

—	loopback {line | internal}

—	no loopback

—	[no] report-alarm [ais] [los] [oof] [rai] [looped]

—	[no] shutdown

—	signal-mode {cas}

—	no signal-mode {cas}

—	threshold {ber-sd | ber-sf} rate {1 | 5 | 10 | 50 | 100}

—	no threshold {ber-sd | ber-sf}

E3 Commands

—	[no] e3 [sonet-sdh-index]

—

atm

—	cell-format cell-format

—	min-vp-vpi value

—	bert {2e3 | 2e9 | 2e11 | 2e15 | 2e20 | 2e20q | 2e23 | ones | zeros | alternating} duration duration

—

no bert

—	bit-error-insertion rate

—	no bit-error-insertion

—	cisco-hdlc

—	down-count down-count

—	no down-count

—	keepalive time-interval

—	no keepalive

—	up-count up-count

—	no up-count

—	clock-source {loop-timed | node-timed}

—	crc {16 | 32}

—	description description-string

—	no description

—	[no] egress-scheduler-override

—	level priority-level rate pir-rate [cir cir-rate]

—	no level priority-level

—	max-rate rate

—	no max-rate

—	egress-scheduler-policy port-scheduler-policy-name

—	encap-type {atm | bcp-null | bcp-dot1q | ipcp | ppp-auto | frame-relay | wan-mirror | cisco-hdlc | cem}

—	[no] feac-loop-respond

—	frame-relay

—	[no] frf-12

—

egress

—	qos-profile profile-id

—	no qos-profile

—	fragment-threshold threshold

—	no fragment-threshold

—	lmi-type {ansi | itu | none | rev1}

—	mode {dce | dte | bidir}

—	n391dte intervals

—	no n391dte

—	n392dce threshold

—	no n392dce

—	n392dte threshold

—	no n392dte

—	n393dce count

—	no n393dce

—	n393dte count

—	no n393dte

—	t391dte keepalive

—	no t391dte

—	t392dce keepalive

—	no t392dce

—	framing (E-3) {g751 | g832}

—	idle-cycle-flag {flags | ones}

—	no idle-cycle-flag

—	load-balancing-algorithm option

—	no load-balancing-algorithm

—	loopback {line | internal | remote}

—	no loopback

—	mac ieee-address

—

no mac

—	mdl {eic | lic | fic | unit | pfi | port | gen} mdl-string

—	no mdl [eic | lic | fic | unit | pfi | port | gen]

—	mdl-transmit {path | idle-signal | test-signal}

—	no mdl-transmit [path | idle-signal | test-signal]

—	mode {access | network}

—	mtu mtu-bytes

—

no mtu

—

network

—	accounting-policy policy-id

—	no accounting-policy

—	[no] collect-stats

—	queue-policy name

—	no queue-policy

—

ppp

—	keepalive time-period [dropcount drop-count]

—	no keepalive

—	[no] report-alarm [ais] [los] [oof] [rai] [looped]

—	[no] scramble

—	[no] shutdown

 

LAG Commands

config

LAG Commands

—	lag [lag-id]

—	[no] lag [lag-id]

—

access

—	adapt-qos {link | port-fair | distribute [include-egr-hash-cfg]}

—	[no] per-fp-egr-queuing

—	[no] per-fp-ing-queuing

—	[no] per-fp-sap-instance

—

bfd

—	disable-soft-reset-extension

—	family {ipv4 | ipv6}

—	[no] bfd-on-distributing-only

—	local-ip-address ip-address

—	no local-ip-address

—	max-admin-down-time [interval | infinite]

—	no max-admin-down-time

—	max-setup-time [interval | infinite]

—	no max-setup-time

—	multiplier multiplier

—	no multiplier

—	receive-interval interval

—	no receive-interval

—	remote-ip-address ip-address

—	no remote-ip-address

—	transmit-interval interval

—	no transmit-interval

—

shutdown

—	no shutdown

—	description long-description-string

—	no description

—	[no] dynamic-cost

—	encap-type {dot1q | null | qinq}

—	no encap-type

—

eth-cfm

—	[no] mep mep-id domain md-index association ma-index [vlan vlan-id]

—	[no] ais-enable

—	client-meg-level [level [level ...]]

—	no client-meg-level

—	interval {1|60}

—	no interval

—	priority priority-value

—	no priority

—	[no] ccm-enable

—	ccm-ltm-priority priority

—	no ccm-ltm-priority

—	ccm-padding-size ccm-padding

—	no ccm-padding-size

—	ccm-tlv-ignore [port-status] [interface-status]

—	no ccm-tlv-ignore

—	ccm-tlv-ignore [port-status] [interface-status]

—	no ccm-tlv-ignore

—	collect-lmm-stats

—	no collect-lmm-stats

—	description description-string

—	no description

—	[no] eth-test-enable

—	bit-error-threshold bit-errors

—	test-pattern {all-zeros|all-ones} [crc-enable]

—	no test-pattern

—	[no] facility-fault

—	low-priority-defect {allDef|macRemErrXcon|remErrXcon|errXcon|xcon|noXcon}

—	mac-address mac-address

—	no mac-address

—	one-way-delay-threshold seconds

—	[no] shutdown

—	hold-time down hold-down-time

—	no hold-time

—	lacp [mode] [administrative-key admin-key] [system-id system-id][system-priority priority]

—	lacp-mux-control {coupled | independent}

—	no lacp-mux-control

—	lacp-xmit-interval {slow | fast}

—	no lacp-xmit-interval

—	[no] lacp-xmit-stdby

—	link-map-profile lag-link-map-profile-id [create]

—	no link-map-profile lag-link-map-profile-id

—	description description-string

—	no description

—	failure-mode [discard | per-link-hash]

—	no failure-mode

—	link port-id {primary|secondary}

—

no link

—	mac ieee-address

—

no mac

—	mode {access | network| hybrid}

—

no mode

—	per-link-hash

—	per-link-hash weighted

—	per-link-hash weighted auto-rebalance

—	no per-link-hash

—	port port-id [port-id …up to 64 total] [priority priority] [sub-group sub-group-id]

—	no port port-id [port-id …up to 64 total]

—	port-threshold value [action {dynamic-cost | down}]

—	no port-threshold

—	port-type {standard | hsmda}

—	no port-type

—	port-weight-speed {1 | 10}

—	no port-weight-speed

—	selection-criteria {highest-count | highest-weight | best-port} [slave-to-partner] [subgroup-hold-time hold-time]

—	no selection-criteria

—	[no] shutdown

—	standby-signalling {lacp | power-off}

—	no standby-signalling

—	weight-threshold value action [{dynamic-cost | down}]

—	no weight-threshold

Ethernet Tunnel Commands

config

—	eth-tunnel tunnel-id

—	no eth-tunnel

—	ccm-hold-time {down down-timeout | up up-timeout}

—	no ccm-hold-time

—	description long-description-string

—	no description

—

ethernet

—	encap-type {dot1q|qinq}

—	no encap-type

—	[no] mac ieee-address

—

hold-time

—	member down time

—

no member

—	lag-emulation

—

access

—	adapt-qos {distribute | link | port-fair}

—	no adapt-qos

—	[no] per-fp-ing-queuing

—	path-threshold num-paths

—	nopath-threshold

—	[no] path path-index

—	description description-string

—	no description

—	control-tag vlan-id

—	no control-tag

—

eth-cfm

—	[no] mep mep-id domain md-index association ma-index

—	[no] ccm-enable

—	ccm-ltm-priority priority

—	no ccm-ltm-priority

—	[no] eth-test-enable

—	test-pattern {all zeros | all-ones} [crc-enable]

—	no test-pattern

—	low-priority-defect {allDef | macRemErrXcon | remErrXcon | errXcon | xcon | noXcon}

—	mac-address mac-address

—	no mac-address

—	[no] control-mep

—	[no] shutdown

—	member port-id

—

no member

—	precedence {primary | secondary}

—	no precedence

—	[no] shutdown

—	protection-type {g8031-1to1 | loadsharing}

—	revert-time time

—	no revert-time

—	[no] shutdown

Multi-Chassis Redundancy Commands

config

—	redundancy

—	bgp-multi-homing

—	boot-timer seconds

—	no boot-timer

—	site-activation-timer seconds

—	no site-activation-timer

—	site-min-down-timer min-down-time

—	no site-min-down-timer

—	multi-chassis

—	[no] peer ip-address

—	authentication-key [authentication-key | hash-key] [hash | hash2]

—	no authentication-key

—	description description-string

—	no description

—	[no] mc-endpoint

—	[no] bfd-enable

—	boot-timer interval

—	no boot-timer

—	hold-on-neighbor-failure multiplier

—	no hold-on-neighbor-failure

—	keep-alive-interval interval

—	no keep-alive-interval

—	[no] passive-mode

—	[no] shutdown

—	system-priority value

—	no system-priority

—	[no] mc-lag

—	hold-on-neighbor-failure multiplier

—	no hold-on-neighbor-failure

—	keep-alive-interval interval

—	no keep-alive-interval

—	lag lag-id lacp-key admin-key system-id system-id [remote-lag remote-lag-id] system-priority system-priority source-bmac-lsb use-lacp-key

—	lag lag-id lacp-key admin-key system-id system-id [remote-lag remote-lag-id] system-priority system-priority source-bmac-lsb MAC-Lsb

—	lag lag-id lacp-key admin-key system-id system-id [remote-lag remote-lag-id] system-priority system-priority

—	lag lag-id [remote-lag remote-lag-id]

—	no lag lag-id

—	[no] shutdown

—

mc-ring

—	ring sync-tag [create]

—	no ring sync-tag

—	in-band-control-path

—	dst-ip ip-address

—

no dst-ip

—	interface ip-int-name

—	no interface

—	service-id service-id

—	no service-id

—	[no] path-b

—	[no] range vlan-range

—	[no] path-excl

—	[no] range vlan-range

—	ring-node ring-node-name [create]

—	no ring-node ring-node-name

—	connectivity-verify

—	dst-ip ip-address

—

no dst-ip

—	interval interval

—	no interval

—	service-id service-id

—	no service-id

—	[no] shutdown

—	src-ip ip-address

—

no src-ip

—	src-mac ieee-address

—	no src-mac

—	vlan [vlan-encap]

—

no vlan

—	[no] shutdown

—	[no] shutdown

—	source-address ip-address

—	no source-address

—

[no] sync

—

[no] igmp

—	[no] igmp-snooping

—	[no] mc-ring

—

[no] mld

—	[no] mld-snooping

—	port [port-id | lag-id] [sync-tag sync-tag]

—	no port [port-id | lag-id]

—	range encap-range [sync-tag sync-tag]

—	no range encap-range

—	[no] shutdown

—

[no] srrp

—	[no] sub-mgmt

 

Show Commands

show

—	aps [port port-id] [group group-name] [detail]

—	chassis [environment] [power-supply]

—	card state

—	card [slot-number]

—	card [slot-number] detail

—	card slot-number fp [1..2] ingress queue-group mode {access|network}

—	card slot-number [detail] fp [1..2] ingress queue-group queue-group-name instance [1..65535] mode {access|network} [statistics]

—

cflowd

—

elmi

—	evc [port-id [vlan vlan-id]]

—	uni [port-id]

—	eth-tunnel

—	interface-group-handler [igh-id]

—	mcm slot [/mcm] [detail]

—	mda slot [/mda] [detail]

—	pools mda-id[/port] [access-app [pool-name | service service-id | queue-group queue-group-name]]

—	pools mda-id[/port] [network-app [pool-name | queue-group queue-group-name]]

—	pools mda-id[/port] [direction [pool-name|service service-id | queue-group queue-group-name]]

—	lag [lag-id] [detail] [statistics]

—	lag [lag-id] description

—	lag [lag-id] port

—	lag lag-id associations

—	lag lag-id bfd

—	lag lag-id [detail] eth-cfm [tunnel tunnel-id]

—	lag lag-id associations per-link-hash interface [class {1 | 2 | 3}]

—	lag lag-id associations link-map-profile [link-map-profile] interface

—	lag lag-id lacp-partner

—	lag lag-id detail lacp-partner

—	lag lag-id link-map-profile link-map-profile

—	lag lag-id associations per-link-hash sap

—	lag lag-id associations link-map-profile [link-map-profile] sap

—	lag [lag-id] [detail] [statistics] [eth-cfm tunnel tunnel-id]

—	lag lag-id associations

—	lag lag-id per-link-hash [class {1 | 2 | 3}] [class {1 | 2 | 3}]

—	lag lag-id per-link-hash port port-id

—	megapools slot-number

—	megapools slot-number fp forwarding-plane [service-id service-id] [queue-group queue-group-name] [ingress | egress]

—	multilink-bundle [bundle-id | bpgrp-id | slot/mda | type {mlppp | ima-grp | mlfr }][detail]

—	multilink-bundle [bundle-id | bpgrp-id | slot/mda] [ppp | ima | mlfr]

—	multilink-bundle [bundle-id | bpgrp-id] relations

—	multilink-bundle bundle-id mlfr [frame-relay [detail]]

—

ima

—	atm [detail]

—	connections

—	port-connection [detail]

—	pvc [detail]

—	pvp [vpi] [detail]

—	pvt [vpi.vci] [detail]

—	ppp [multiclass]

—

relations

—	port port-id [count] [detail]

—	port port-id description

—	port port-id associations

—	port port-id atm

—	port port-id atm connections

—	port port-id atm cp

—	port port-id atm ilmi

—	port port-id atm interface-connections

—	port port-id atm pvc [vpi[/vci]] [detail]

—	port port-id atm pvp [vpi] [detail]

—	port port-id atm pvt [vpi-range] [detail]

—	port port-id cisco-hdlc [detail]

—	port port-id mlfr-link[detail]

—	port port-id frame-relay [detail]

—	port port-id otu [detail]

—	port port-id ppp [detail]

—	port port-id queue-group [ingress|egress] [queue-group-name] [access|network] [{statistic|assocations}]

—	port port-id queue-group qgrp-id [instance instance-id] queue-depth [queue queue-id] [ingress|egress] [access|network]

—	port port-id dot1x [detail]

—	port port-id ethernet [[efm-oam [event-logs {failure|degraded} {active|cleared}] | detailed]

—	dot1x [detail]

—	lldp [nearest-bridge | nearest-non-tpmr | nearest-customer] [remote-info] [detail]

—	port aps [detail]

—

port cem

—	port port-id ima-link

—	port port-id ima-link

—	port port-id monitor-threshold

—	port port-id vport vport-name monitor-threshold

—	port-tree port-id

—	redundancy

—	multi-chassis all

—	multi-chassis mc-lag

—	multi-chassis sync

—	mc-lag peer ip-address [lag lag-id]

—	mc-lag [peer ip-address [lag lag-id]] statistics

—	mc-ring peer ip-address statistics

—	mc-ring peer ip-address [ring sync-tag [detail | statistics] ]

—	mc-ring peer ip-address ring sync-tag ring-node [ring-node-name [detail | statistics] ]

—	mc-ring global-statistics

—

system

—	lldp [neighbor] neighbor

—	switch-fabric high-bandwidth-multicast

 

Monitor Commands

For more information about monitor commands, refer to the OS Basic System Configuration Guide for command usage and CLI syntax.

monitor

—	card slot-number fp fp-number ingress {access | network} queue-group queue-group-name instance instance-id [absolute] [interval seconds] [repeat repeat] policer policer-id

—	port port-id [port-id...(up to 5 max)] [interval seconds] [repeat repeat] [absolute | rate] [multiclass]

—	queue-group queue-group-name egress access egress-queue egress-queue-id [interval seconds] [repeat repeat] [absolute | rate]

—	queue-group queue-group-name ingress access ingress-queue ingress-queue-id [interval seconds] [repeat repeat] [absolute | rate]

—	queue-group queue-group-name egress network instance instance-id [policer policer-id] [egress-queue egress-queue-id] [interval seconds] [repeat repeat] [absolute | rate]

—	port atm [interval seconds] [repeat repeat] [absolute | rate]

 

Clear Commands

clear

—	card slot-number soft [hard-reset-unsupported-mdas]

—	card slot-number fp [1..2] ingress mode {access|network} queue-group group-name instance instance statistics

—	card slot-number [soft]

—	lag lag-id statistics

—	mda mda-id [statistics]

—	port port-id statistics

—	port port-id statistics

—	port port-id atm pvc [vpi[/vci]] statistics

—	port port-id atm pvp [vpi] statistics

—	port port-id atm pvt [vpi1.vpi2] statistics

—	port port-id atm ilmi statistics

—	port port-id atm interface-connection statistics

—	port port-id ethernet efm-oam events local|remote

—	port port-id queue-group qgrp-id [instance instance-id] queue-depth [queue queue-id] {ingress|egress} [access|network]

—	port port-id queue-group queue-group-name [access | network] {ingress | egress} [access|network] [{statistics|associations}]

—	queue-group queue-group-name egress access egress-queue egress-queue-id [interval seconds] [repeat repeat] [absolute | rate]

—	queue-group queue-group-name ingress access ingress-queue ingress-queue-id [interval seconds] [repeat repeat] [absolute | rate]

—	queue-group queue-group-name egress network instance instance-id [policer policer-id] [egress-queue egress-queue-id] [interval seconds] [repeat repeat] [absolute | rate]

 

Debug Commands

debug

—

atm

—	cisco-hdlc port-id

—	frame-relay

—	lmi [port-id]

—	[no] frf16 port-id

—	lag [lag-id lag-id port port-id] [all]

—	lag [lag-id lag-id port port-id] [sm] [pkt] [cfg] [red] [iom-upd] [port-state] [timers] [sel-logic] [mc] [mc-pkt]

—	no lag [lag-id lag-id]

—	[no] ppp port-id

 

Tools Commands

tools

—

dump

—	aps aps-id [clear]

—	aps mc-aps-signaling [clear]

—	aps mc-aps-ppp [clear]

—	eth-tunnel tunnel-index [clear]

—	frame-relay port-id

—	lag lag-id lag-id

—	map-to-phy-port {ccag ccag-id | lag lag-id | eth-tunnel tunnel-index} {isid isid [end-isid isid] | service service-id | svc-name [end-service service-id | svc-name]} [summary]

—	lag port-id

—	redundancy

—	multi-chassis

—

mc-ring

—	srrp-sync-data [instance instance-id] [peer ip-address]

—	sync-database [peer ip-address] [port port-id | lag-id] [sync-tag sync-tag] [application {dhcps | igmp| igmp-snooping | mc-ring | srrp | sub-mgmt | mld-snooping}] [detail] [type {alarm-deleted | local-deleted}]

tools

—

perform

—

aps

—	clear aps-id {protect | working}

—	exercise aps-id {protect | working}

—	force aps-id {protect | working}

—	lockout aps-id

—	request aps-id {protect | working}

—

eth-ring

—	clear ring-id

—	This command clears a physical port that is acting as the working circuit for this APS group. force ring-id path {a | b}

—	manual ring-id path {a | b}

—

ima

—	reset bundle-id

—

lag

—	clear-force all-mc

—	clear-force lag-id lag-id [sub-group sub-group-id]

—	clear-force peer-mc ip-address

—	force all-mc {active|standby}

—	force lag-id lag-id [sub-group sub-group-id] {active|standby}

—	force peer-mc peer-ip-address {active|standby}

—	load-balance lag-id lag-id [class {1|2|3}]