For feedback, use the following:
ipd_online_feedback@alcatel-lucent.com
Table of Contents Previous Next Index PDF


VPRN Show Commands
VPRN
egress-label
Syntax 
egress-label egress-label1 [egress-label2]
Context 
show>service
Description 
Display services using the range of egress labels.
If only the mandatory egress-label1 parameter is specified, only services using the specified label are displayed.
If both egress-label1 and egress-label2 parameters are specified, the services using the range of labels X where egress-label1 <= X <= egress-label2 are displayed.
Use the show router ldp bindings command to display dynamic labels.
Parameters 
egress-label1
The starting egress label value for which to display services using the label range. If only egress-label1 is specified, services only using egress-label1 are displayed.
Values
egress-label2
The ending egress label value for which to display services using the label range.
Default
The egress-label1 value.
Values
Output 
Show Service Egress Command Output
The following table describes show service egress label output fields.
 
 
Sample Output
*A:ALA-12# show service egress-label 0 10000
==============================================================================
Martini Service Labels                                                         
==============================================================================
Svc Id     Sdp Id             Type I.Lbl        E.Lbl                          
------------------------------------------------------------------------------
1          10:1               Mesh 0            0                              
1          20:1               Mesh 0            0                              
1          30:1               Mesh 0            0                              
1          100:1              Mesh 0            0                              
...
1          107:1              Mesh 0            0                              
1          108:1              Mesh 0            0                              
1          300:1              Mesh 0            0                              
1          301:1              Mesh 0            0                              
1          302:1              Mesh 0            0                              
1          400:1              Mesh 0            0                              
1          500:2              Spok 131070       2001                           
1          501:1              Mesh 131069       2000                           
100        300:100            Spok 0            0                              
200        301:200            Spok 0            0                              
300        302:300            Spok 0            0                              
400        400:400            Spok 0            0                              
------------------------------------------------------------------------------
Number of Bindings Found : 23                                                  
==============================================================================
*A:ALA-12#
ingress-label
Syntax 
ingress-label start-label [end-label]
Context 
show>service
Description 
Display services using the range of ingress labels.
If only the mandatory start-label parameter is specified, only services using the specified label are displayed.
If both start-label and end-label parameters are specified, the services using the range of labels X where start-label <= X <= end-label are displayed.
Use the show router vprn-service-id ldp bindings command to display dynamic labels.
Parameters 
start-label
The starting ingress label value for which to display services using the label range. If only start-label is specified, services only using start-label are displayed.
Values
end-label
The ending ingress label value for which to display services using the label range.
Default
The start-label value.
Values
Output 
Show Service Ingress-Label
The following table describes show service ingress-label output fields:
 
 
Sample Output
*A:ALA-12# show service ingress-label 0
==============================================================================
Martini Service Labels                                                         
==============================================================================
Svc Id     Sdp Id             Type I.Lbl        E.Lbl                          
------------------------------------------------------------------------------
1          10:1               Mesh 0            0                              
1          20:1               Mesh 0            0                              
1          30:1               Mesh 0            0                              
1          50:1               Mesh 0            0                              
1          100:1              Mesh 0            0                              
1          101:1              Mesh 0            0                              
1          102:1              Mesh 0            0                              
1          103:1              Mesh 0            0                              
1          104:1              Mesh 0            0                              
1          105:1              Mesh 0            0                              
1          106:1              Mesh 0            0                              
1          107:1              Mesh 0            0                              
1          108:1              Mesh 0            0                              
1          300:1              Mesh 0            0                              
1          301:1              Mesh 0            0                              
1          302:1              Mesh 0            0                              
1          400:1              Mesh 0            0                              
100        300:100            Spok 0            0                              
200        301:200            Spok 0            0                              
300        302:300            Spok 0            0                              
400        400:400            Spok 0            0                              
------------------------------------------------------------------------------
Number of Bindings Found : 21
------------------------------------------------------------------------------
*A:ALA-12# 
 
 
sap-using
Syntax 
sap-using [msap] [dyn-script] [description]
sap-using [sap sap-id] [vlan-translation | anti-spoof] [description]
sap-using [sap sap-id]
sap-using interface [ip-address | ip-int-name]
sap-using [ingress | egress] atm-td-profile td-profile-id
sap-using [ingress | egress] filter filter-id
sap-using [ingress | egress] qos-policy qos-policy-id
sap-using authentication-policy policy-name
Context 
show>service
Description 
This command displays SAP information.
If no optional parameters are specified, the command displays a summary of all defined SAPs.
The optional parameters restrict output to only SAPs matching the specified properties.
Parameters 
sap-id
Specifies the physical port identifier portion of the SAP definition. See Common CLI Command Descriptions for command syntax.
interface
Specifies matching SAPs with the specified IP interface.
ip-address
The IP address of the interface for which to display matching SAPs.
Values
ip-int-name
The IP interface name for which to display matching SAPs.
dyn-script
Displays dynamic service SAPs information.
ingress
Specifies matching an ingress policy.
egress
Specifies matching an egress policy.
qos-policy qos-policy-id
The ingress or egress QoS Policy ID for which to display matching SAPs.
Values
atm-td-profile td-profile-id
Displays SAPs using this traffic description.
filter filter-id
The ingress or egress filter policy ID for which to display matching SAPs.
Values
authentication-policy policy name
Specifies an existing authentication policy.
Output 
Show Service SAP
The following table describes show service SAP output fields:
Sample Output
*A:ALA-12# show service sap-using sap 1/1
==============================================================================
Service Access Points                                                         
==============================================================================
PortId         SvcId      SapMTU I.QoS I.Mac/IP E.QoS E.Mac/IP A.Pol  Adm  Opr 
------------------------------------------------------------------------------
1/1/7:0        1          1518   10    8        10    none     none   Up   Up  
1/1/11:0       100        1514   1     none     1     none     none   Down Down
1/1/7:300      300        1518   10    none     10    none     1000   Up   Up  
------------------------------------------------------------------------------
Number of SAPs : 3                                                             
------------------------------------------------------------------------------
*A:ALA-12# 
 
*A:ALA-12#  show service sap-using egress atm-td-profile 2 
=============================================================================== 
Service Access Point Using ATM Traffic Profile 2
===============================================================================
PortId SvcId I.QoS I.Fltr E.QoS E.Fltr A.Pol Adm Opr
-------------------------------------------------------------------------------
5/1/1:0/11 	511111 	2 	none 	2 	none 	none 	Up 	Up 
5/1/1:0/12 	511112 	2 	none 	2 	none 	none 	Up 	Up 
5/1/1:0/13 	511113 	2 	none 	2 	none 	none 	Up 	Up 
5/1/1:0/14 	511114 	2 	none 	2 	none 	none 	Up 	Up 
5/1/1:0/15 	511115 	2 	none 	2 	none 	none 	Up 	Up 
5/1/1:0/16 	511116 	2 	none 	2 	none 	none 	Up 	Up 
5/1/1:0/17 	511117 	2 	none 	2 	none 	none 	Up 	Up 
5/1/1:0/18 	511118 	2 	none 	2 	none 	none 	Up 	Up 
5/1/1:0/19 	511119 	2 	none 	2 	none 	none 	Up 	Up 
5/1/1:0/20 	511120 	2 	none 	2 	none 	none 	Up 	Up 
5/1/1:0/21 	511121 	2 	none 	2 	none 	none 	Up 	Up 
5/1/1:0/22 	511122 	2 	none 	2 	none 	none 	Up 	Up 
5/1/1:0/23 	511123 	2 	none 	2 	none 	none 	Up 	Up 
5/1/1:0/24 	511124 	2 	none 	2 	none 	none 	Up 	Up 
5/1/1:0/25 	511125 	2 	none 	2 	none 	none 	Up 	Up ...
=============================================================================== 
*A:ALA-12# 
sdp
Syntax 
sdp [sdp-id | far-end ip-address] [detail | keep-alive-history]
Context 
show>service
Description 
Displays SDP information.
If no optional parameters are specified, a summary SDP output for all SDPs is displayed.
Parameters 
sdp-id
The SDP ID for which to display information.
Default
Values
far-end ip-address
Displays only SDPs matching with the specified far-end IP address.
Default
detail
Displays detailed SDP information.
Default
keep-alive-history
Displays the last fifty SDP keepalive events for the SDP.
Default
Output 
Show Service SDP
The following table describes show service SDP output fields:
 
 
Sample Output
*A:ALA-12# show service sdp
==============================================================================
Services: Service Destination Points                                          
==============================================================================
SdpId    Adm MTU   Opr MTU   IP address       Adm  Opr         Deliver Signal  
------------------------------------------------------------------------------
10       4462      4462      10.20.1.3        Up   Dn NotReady MPLS    TLDP    
40       4462      1534      10.20.1.20       Up   Up          MPLS    TLDP    
60       4462      1514      10.20.1.21       Up   Up          GRE     TLDP    
100      4462      4462      180.0.0.2        Down Down        GRE     TLDP    
500      4462      4462      10.20.1.50       Up   Dn NotReady GRE     TLDP    
------------------------------------------------------------------------------
Number of SDPs : 5                                                            
==============================================================================
*A:ALA-12# 
 
*A:ALA-12# show service sdp 2 detail
===============================================================================
Service Destination Point (Sdp Id : 2) Details
===============================================================================
-------------------------------------------------------------------------------
 Sdp Id 2  -(10.10.10.104)
-------------------------------------------------------------------------------
Description           : GRE-10.10.10.104
SDP Id               : 2
Admin Path MTU       : 0                     Oper Path MTU      : 0
Far End              : 10.10.10.104          Delivery           : GRE
Admin State          : Up                    Oper State         : Down
Flags                : SignalingSessDown TransportTunnDown
Signaling            : TLDP                  VLAN VC Etype      : 0x8100
Last Status Change   : 02/01/2007 09:11:39   Adv. MTU Over.     : No
Last Mgmt Change     : 02/01/2007 09:11:46
 
KeepAlive Information :
Admin State          : Disabled              Oper State         : Disabled
Hello Time           : 10                    Hello Msg Len      : 0
Hello Timeout        : 5                     Unmatched Replies  : 0
Max Drop Count       : 3                     Hold Down Time     : 10
Tx Hello Msgs        : 0                     Rx Hello Msgs      : 0
 
Associated LSP LIST :
SDP Delivery Mechanism is not MPLS
===============================================================================
*A:ALA-12# 
 
*A:ALA-12# show service sdp 8
==============================================================================
Service Destination Point (Sdp Id : 8)
==============================================================================
SdpId    Adm MTU   Opr MTU   IP address       Adm  Opr         Deliver Signal
------------------------------------------------------------------------------
8        4462      4462      10.10.10.104     Up   Dn NotReady MPLS    TLDP
==============================================================================
Service Destination Point (Sdp Id : 8) Details
-------------------------------------------------------------------------------
 Sdp Id 8  -(10.10.10.104)
-------------------------------------------------------------------------------
Description           : MPLS-10.10.10.104
SDP Id               : 8
Admin Path MTU       : 0                     Oper Path MTU      : 0
Far End              : 10.10.10.104          Delivery           : MPLS
Admin State          : Up                    Oper State         : Down
Flags                : SignalingSessDown TransportTunnDown
Signaling            : TLDP                  VLAN VC Etype      : 0x8100
Last Status Change   : 02/01/2007 09:11:39   Adv. MTU Over.     : No
Last Mgmt Change     : 02/01/2007 09:11:46
 
KeepAlive Information :
Admin State          : Disabled              Oper State         : Disabled
Hello Time           : 10                    Hello Msg Len      : 0
Hello Timeout        : 5                     Unmatched Replies  : 0
Max Drop Count       : 3                     Hold Down Time     : 10
Tx Hello Msgs        : 0                     Rx Hello Msgs      : 0
 
Associated LSP LIST :
Lsp Name             : to-104
Admin State          : Up                    Oper State         : Down
Time Since Last Tran*: 01d07h36m
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:ALA-12#
sdp-using
Syntax 
sdp-using [sdp-id[:vc-id] | far-end ip-address]
Context 
show>service
Description 
Display services using SDP or far-end address options.
Parameters 
sdp-id
Displays only services bound to the specified SDP ID.
Values
vc-id
The virtual circuit identifier.
Values
far-end ip-address
Displays only services matching with the specified far-end IP address.
Default
Output 
Show Service SDP Using X
The following table describes show service sdp-using output fields.
 
 
Sample Output
*A:ALA-1# show service sdp-using 300
===============================================================================
Service Destination Point (Sdp Id : 300)
===============================================================================
SvcId       SdpId               Type Far End        Opr State I.Label  E.Label
-------------------------------------------------------------------------------
1           300:1               Mesh 10.0.0.13      Up        131071   131071
2           300:2               Spok 10.0.0.13      Up        131070   131070
100         300:100             Mesh 10.0.0.13      Up        131069   131069
101         300:101             Mesh 10.0.0.13      Up        131068   131068
102         300:102             Mesh 10.0.0.13      Up        131067   131067
-------------------------------------------------------------------------------
Number of SDPs : 5
-------------------------------------------------------------------------------
*A:ALA-1#
 
 
A:ALA-48# show service sdp-using 
===============================================================================
SDP Using
===============================================================================
SvcId       SdpId               Type Far End        Opr State I.Label  E.Label 
-------------------------------------------------------------------------------
3           2:3                 Spok 10.20.1.2      Up        n/a      n/a     
103         3:103               Spok 10.20.1.3      Up        131067   131068  
103         4:103               Spok 10.20.1.2      Up        131065   131069
105         3:105               Spok 10.20.1.3      Up        131066   131067  
-------------------------------------------------------------------------------
Number of SDPs : 4
-------------------------------------------------------------------------------
A:ALA-48
service-using
Syntax 
service-using [epipe] [ies] [vpls] [vprn] [mirror] [apipe] [fpipe] [ipipe] [sdp sdp-id] [customer customer-id]
Context 
show>service
Description 
Displays the services matching certain usage properties.
If no optional parameters are specified, all services defined on the system are displayed.
Parameters 
epipe
Displays matching Epipe services.
ies
Displays matching IES instances.
vpls
Displays matching VPLS instances.
vprn
Displays matching VPRN services.
mirror
Displays mirror services.
apipe
Displays matching Apipe services.
fpipe
Displays matching Fpipe services.
ipipe
Displays matching Ipipe services.
sdp sdp-id
Displays only services bound to the specified SDP ID.
Default
Values
customer customer-id
Displays services only associated with the specified customer ID.
Default
Values
Output 
Show Service Service-Using
The following table describes show service service-using output fields:
Sample Output
*A:ALA-12# show service service-using customer 10
==============================================================================
Services
==============================================================================
ServiceId    Type      Adm    Opr        CustomerId        Last Mgmt Change
------------------------------------------------------------------------------
1            VPLS      Up     Up         10                09/05/2006 13:24:15
100          IES       Up     Up         10                09/05/2006 13:24:15
300          Epipe     Up     Up         10                09/05/2006 13:24:15
900          VPRN      Up     Up         2                 11/04/2006 04:55:12
------------------------------------------------------------------------------
Matching Services : 4
==============================================================================
*A:ALA-12#
 
*A:ALA-12# show service service-using epipe
===============================================================================
Services [epipe]
===============================================================================
ServiceId    Type      Adm    Opr        CustomerId        Last Mgmt Change
-------------------------------------------------------------------------------
6            Epipe     Up     Up         6                 06/22/2006 23:05:58
7            Epipe     Up     Up         6                 06/22/2006 23:05:58
8            Epipe     Up     Up         3                 06/22/2006 23:05:58
103          Epipe     Up     Up         6                 06/22/2006 23:05:58
-------------------------------------------------------------------------------
Matching Services : 4
===============================================================================
*A:ALA-12#
 
 
A:de14# show service service-using
===============================================================================
Services
===============================================================================
ServiceId    Type      Adm    Opr        CustomerId        Last Mgmt Change
-------------------------------------------------------------------------------
1            uVPLS     Up     Up         1                 10/26/2006 15:44:57
2            Epipe     Up     Down       1                 10/26/2006 15:44:57
10           mVPLS     Down   Down       1                 10/26/2006 15:44:57
11           mVPLS     Down   Down       1                 10/26/2006 15:44:57
100          mVPLS     Up     Up         1                 10/26/2006 15:44:57
101          mVPLS     Up     Up         1                 10/26/2006 15:44:57
102          mVPLS     Up     Up         1                 10/26/2006 15:44:57
999          uVPLS     Down   Down       1                 10/26/2006 16:14:33
-------------------------------------------------------------------------------
Matching Services : 8
-------------------------------------------------------------------------------
A:de14#
id
Syntax 
id service-id {all | arp | base | fdb | labels | mfib | sap | sdp | split-horizon-group | stp}
Context 
show>service
Description 
This command displays information for a particular service-id.
Parameters 
service-id
The unique service identification number that identifies the service in the service domain.
all
Display detailed information about the service.
arp
Display ARP entries for the service.
base
Display basic service information.
fdb
Display FDB entries.
interface
Display service interfaces.
labels
Display labels being used by this service.
sap
Display SAPs associated to the service.
sdp
Display SDPs associated with the service.
split-horizon-group
Display split horizon group information.
stp
Display STP information.
all
Syntax 
all
Context 
show>service>id
Description 
Displays detailed information for all aspects of the service.
Show All Service-ID Output
The following table describes the show all service-id command output fields:
 
Sample Output
A:ALA-48# show service id 1 all
===============================================================================
Service Detailed Information
===============================================================================
Service Id        : 1                   Vpn Id            : 0
Service Type      : VPRN
Customer Id       : 1
Last Status Change: 06/18/2007 10:07:01
Last Mgmt Change  : 06/18/2007 10:07:01
Admin State       : Up                  Oper State        : Up
 
Route Dist.       : 10001:1             VPRN Type         : regular
AS Number         : 10000               Router Id         : 10.10.10.103
ECMP              : Enabled             ECMP Max Routes   : 8
Max Routes        : 80                  Auto Bind         : LDP
Vrf Target        : target:10001:1
Vrf Import        : vrfImpPolCust1
Vrf Export        : vrfExpPolCust1
 
SAP Count         : 2                   SDP Bind Count    : 3
-------------------------------------------------------------------------------
Service Destination Points(SDPs)
-------------------------------------------------------------------------------
 Sdp Id 1:1  -(10.10.10.49)
-------------------------------------------------------------------------------
Description     : to-GRE-10.10.10.49
SDP Id             : 1:1                      Type              : Spoke
VC Type            : n/a                      VC Tag            : n/a
Admin Path MTU     : 0                        Oper Path MTU     : 0
Far End            : 10.10.10.49              Delivery          : GRE
 
Admin State        : Up                       Oper State        : Down
Acct. Pol          : None                     Collect Stats     : Disabled
Ingress Label      : n/a                      Egress Label      : n/a
Ing mac Fltr       : n/a                      Egr mac Fltr      : n/a
Ing ip Fltr        : n/a                      Egr ip Fltr       : n/a
Ing ipv6 Fltr      : n/a                      Egr ipv6 Fltr     : n/a
Admin ControlWord  : Not Preferred            Oper ControlWord  : False
Admin BW(Kbps)     : 0                        Oper BW(Kbps)     : 0
Last Status Change : 06/18/2007 10:06:49      Signaling         : n/a
Last Mgmt Change   : 06/18/2007 10:07:01
Class Fwding State : Down
Flags              : SdpOperDown
Peer Pw Bits       : None
Peer Fault Ip      : None
Peer Vccv CV Bits  : None
Peer Vccv CC Bits  : None
 
KeepAlive Information :
Admin State        : Disabled                 Oper State        : Disabled
Hello Time         : 10                       Hello Msg Len     : 0
Max Drop Count     : 3                        Hold Down Time    : 10
 
Statistics            :
I. Fwd. Pkts.      : n/a                      I. Dro. Pkts.     : n/a
I. Fwd. Octs.      : n/a                      I. Dro. Octs.     : n/a
E. Fwd. Pkts.      : n/a                      E. Fwd. Octets    : n/a
 
Associated LSP LIST :
SDP Delivery Mechanism is not MPLS
-------------------------------------------------------------------------------
 Sdp Id 1:10  -(10.10.10.49)
-------------------------------------------------------------------------------
Description     : to-GRE-10.10.10.49
SDP Id             : 1:10                     Type              : Spoke
VC Type            : n/a                      VC Tag            : n/a
Admin Path MTU     : 0                        Oper Path MTU     : 0
Far End            : 10.10.10.49              Delivery          : GRE
 
Admin State        : Up                       Oper State        : Down
Acct. Pol          : None                     Collect Stats     : Disabled
Ingress Label      : 0                        Egress Label      : 0
Ing mac Fltr       : n/a                      Egr mac Fltr      : n/a
Ing ip Fltr        : n/a                      Egr ip Fltr       : n/a
Ing ipv6 Fltr      : n/a                      Egr ipv6 Fltr     : n/a
Admin ControlWord  : Not Preferred            Oper ControlWord  : False
Admin BW(Kbps)     : 0                        Oper BW(Kbps)     : 0
Last Status Change : 06/18/2007 10:06:49      Signaling         : n/a
Last Mgmt Change   : 06/18/2007 10:07:01
Class Fwding State : Down
Flags              : SdpOperDown
                     NoIngVCLabel NoEgrVCLabel
Peer Pw Bits       : None
Peer Fault Ip      : None
Peer Vccv CV Bits  : None
Peer Vccv CC Bits  : None
 
KeepAlive Information :
Admin State        : Disabled                 Oper State        : Disabled
Hello Time         : 10                       Hello Msg Len     : 0
Max Drop Count     : 3                        Hold Down Time    : 10
 
Statistics            :
I. Fwd. Pkts.      : 0                        I. Dro. Pkts.     : 0
I. Fwd. Octs.      : 0                        I. Dro. Octs.     : 0
E. Fwd. Pkts.      : 0                        E. Fwd. Octets    : 0
 
Associated LSP LIST :
SDP Delivery Mechanism is not MPLS
-------------------------------------------------------------------------------
 Sdp Id 3:4  -(10.10.10.105)
-------------------------------------------------------------------------------
SDP Id             : 3:4                      Type              : Spoke
VC Type            : n/a                      VC Tag            : n/a
Admin Path MTU     : 0                        Oper Path MTU     : 0
Far End            : 10.10.10.105             Delivery          : GRE
 
Admin State        : Up                       Oper State        : Down
Acct. Pol          : None                     Collect Stats     : Disabled
Ingress Label      : 3000                     Egress Label      : 2000
Ing mac Fltr       : n/a                      Egr mac Fltr      : n/a
Ing ip Fltr        : 10                       Egr ip Fltr       : 10
Ing ipv6 Fltr      : n/a                      Egr ipv6 Fltr     : n/a
Admin ControlWord  : Not Preferred            Oper ControlWord  : False
Admin BW(Kbps)     : 0                        Oper BW(Kbps)     : 0
Last Status Change : 06/18/2007 10:06:49      Signaling         : n/a
Last Mgmt Change   : 06/18/2007 10:07:01
Class Fwding State : Down
Flags              : SdpOperDown
Peer Pw Bits       : None
Peer Fault Ip      : None
Peer Vccv CV Bits  : None
Peer Vccv CC Bits  : None
 
KeepAlive Information :
Admin State        : Disabled                 Oper State        : Disabled
Hello Time         : 10                       Hello Msg Len     : 0
Max Drop Count     : 3                        Hold Down Time    : 10
 
Statistics            :
I. Fwd. Pkts.      : 0                        I. Dro. Pkts.     : 0
I. Fwd. Octs.      : 0                        I. Dro. Octs.     : 0
E. Fwd. Pkts.      : 0                        E. Fwd. Octets    : 0
 
Associated LSP LIST :
SDP Delivery Mechanism is not MPLS
-------------------------------------------------------------------------------
Number of SDPs : 3
-------------------------------------------------------------------------------
Service Access Points
-------------------------------------------------------------------------------
SAP 1/1/21:0
-------------------------------------------------------------------------------
Service Id         : 1
SAP                : 1/1/21:0                 Encap             : q-tag
Dot1Q Ethertype    : 0x8100                   QinQ Ethertype    : 0x8100
 
Admin State        : Up                       Oper State        : Down
Flags              : PortOperDown
Last Status Change : 06/18/2007 10:06:49
Last Mgmt Change   : 06/18/2007 10:07:01
Admin MTU          : 1518                     Oper MTU          : 1518
Ingress qos-policy : 1                        Egress qos-policy : 1
Shared Q plcy      : n/a                      Multipoint shared : Disabled
Ingr IP Fltr-Id    : n/a                      Egr IP Fltr-Id    : n/a
Ingr Mac Fltr-Id   : n/a                      Egr Mac Fltr-Id   : n/a
Ingr IPv6 Fltr-Id  : n/a                      Egr IPv6 Fltr-Id  : n/a
tod-suite          : None                     qinq-pbit-marking : both
Egr Agg Rate Limit : max
 
Multi Svc Site     : None
Acct. Pol          : None                     Collect Stats     : Disabled
 
Anti Spoofing      : None                     Nbr Static Hosts  : 0
-------------------------------------------------------------------------------
Sap Statistics
-------------------------------------------------------------------------------
Last Cleared Time     : N/A
                        Packets                 Octets
Forwarding Engine Stats
Dropped               : 0                       0
Off. HiPrio           : 0                       0
Off. LowPrio          : 0                       0
Off. Uncolor          : 0                       0
 
Queueing Stats(Ingress QoS Policy 1)
Dro. HiPrio           : 0                       0
Dro. LowPrio          : 0                       0
For. InProf           : 0                       0
For. OutProf          : 0                       0
 
Queueing Stats(Egress QoS Policy 1)
Dro. InProf           : 0                       0
Dro. OutProf          : 0                       0
For. InProf           : 0                       0
For. OutProf          : 0                       0
-------------------------------------------------------------------------------
Sap per Queue stats
-------------------------------------------------------------------------------
                        Packets                 Octets
Ingress Queue 1 (Unicast) (Priority)
Off. HiPrio           : 0                       0
Off. LoPrio           : 0                       0
Dro. HiPrio           : 0                       0
Dro. LoPrio           : 0                       0
For. InProf           : 0                       0
For. OutProf          : 0                       0
 
Egress Queue 1
For. InProf           : 0                       0
For. OutProf          : 0                       0
Dro. InProf           : 0                       0
Dro. OutProf          : 0                       0
-------------------------------------------------------------------------------
SAP 1/2/4:0
-------------------------------------------------------------------------------
Service Id         : 1
SAP                : 1/2/4:0                  Encap             : q-tag
Dot1Q Ethertype    : 0x8100                   QinQ Ethertype    : 0x8100
 
Admin State        : Up                       Oper State        : Down
Flags              : PortOperDown
Last Status Change : 06/18/2007 10:06:49
Last Mgmt Change   : 06/18/2007 10:07:01
Admin MTU          : 1518                     Oper MTU          : 1518
Ingress qos-policy : 1                        Egress qos-policy : 1
Shared Q plcy      : n/a                      Multipoint shared : Disabled
Ingr IP Fltr-Id    : n/a                      Egr IP Fltr-Id    : n/a
Ingr Mac Fltr-Id   : n/a                      Egr Mac Fltr-Id   : n/a
Ingr IPv6 Fltr-Id  : n/a                      Egr IPv6 Fltr-Id  : n/a
tod-suite          : None                     qinq-pbit-marking : both
Egr Agg Rate Limit : max
 
Multi Svc Site     : None
Acct. Pol          : None                     Collect Stats     : Disabled
 
Anti Spoofing      : Ip-Mac                   Nbr Static Hosts  : 0
-------------------------------------------------------------------------------
Subscriber Management
-------------------------------------------------------------------------------
Admin State        : Down                     MAC DA Hashing    : False
Def Sub-Id         : None
Def Sub-Profile    : None
Def SLA-Profile    : None
Def App-Profile    : None
Sub-Ident-Policy   : None
 
Subscriber Limit   : 1
Single-Sub-Parameters
 Prof Traffic Only : False
 Non-Sub-Traffic   : N/A
-------------------------------------------------------------------------------
Sap Statistics
-------------------------------------------------------------------------------
Last Cleared Time     : N/A
                        Packets                 Octets
Forwarding Engine Stats
Dropped               : 0                       0
Off. HiPrio           : 0                       0
Off. LowPrio          : 0                       0
Off. Uncolor          : 0                       0
 
Queueing Stats(Ingress QoS Policy 1)
Dro. HiPrio           : 0                       0
Dro. LowPrio          : 0                       0
For. InProf           : 0                       0
For. OutProf          : 0                       0
 
Queueing Stats(Egress QoS Policy 1)
Dro. InProf           : 0                       0
Dro. OutProf          : 0                       0
For. InProf           : 0                       0
For. OutProf          : 0                       0
-------------------------------------------------------------------------------
Sap per Queue stats
-------------------------------------------------------------------------------
                        Packets                 Octets
Ingress Queue 1 (Unicast) (Priority)
Off. HiPrio           : 0                       0
Off. LoPrio           : 0                       0
Dro. HiPrio           : 0                       0
Dro. LoPrio           : 0                       0
For. InProf           : 0                       0
For. OutProf          : 0                       0
 
Egress Queue 1
For. InProf           : 0                       0
For. OutProf          : 0                       0
Dro. InProf           : 0                       0
Dro. OutProf          : 0                       0
-------------------------------------------------------------------------------
Service Interfaces
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
If Name           : to-ce1
Admin State       : Up                  Oper (v4/v6)      : Down/Down
Protocols         : None
IP Addr/mask      : 11.1.0.1/24         Address Type      : Primary
IGP Inhibit       : Disabled            Broadcast Address : Host-ones
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
If Index          : 2                   Virt. If Index    : 2
Last Oper Chg     : 06/18/2007 10:07:01 Global If Index   : 96
SAP Id            : 1/1/21:0
TOS Marking       : Trusted             If Type           : VPRN
SNTP B.Cast       : False
MAC Address       : 14:30:01:01:00:15   Arp Timeout       : 14400
IP MTU            : 1500                ICMP Mask Reply   : True
Arp Populate      : Disabled            Host Conn Verify  : Enabled
 
Proxy ARP Details
Rem Proxy ARP     : Disabled            Local Proxy ARP   : Disabled
Policies          : none
 
Proxy Neighbor Discovery Details
Local Pxy ND      : Disabled
Policies          : none
 
DHCP Details
Admin State       : Up                  Lease Populate    : 1
Gi-Addr           : 11.1.0.1*           Gi-Addr as Src Ip : Disabled
* = inferred gi-address from interface IP address
 
Action            : Keep                Trusted           : Disabled
 
DHCP Proxy Details
Admin State       : Down
Lease Time        : N/A
Emul. Server      : Not configured
 
Subscriber Authentication Details
Auth Policy       : None
 
DHCP6 Relay Details
Admin State       : Down                Lease Populate    : 0
Oper State        : Down                Nbr Resolution    : Disabled
If-Id Option      : None                Remote Id         : Disabled
Src Addr          : Not configured
 
DHCP6 Server Details
Admin State       : Down                Max. Lease States : 8000
 
ICMP Details
Redirects    : Number - 100                     Time (seconds)   - 10
Unreachables : Number - 100                     Time (seconds)   - 10
TTL Expired  : Number - 100                     Time (seconds)   - 10
 
IPCP Address Extension Details
Peer IP Addr      : Not configured
Peer Pri DNS Addr : Not configured
Peer Sec DNS Addr : Not configured
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
If Name           : test
Admin State       : Up                  Oper (v4/v6)      : Down/Down
Protocols         : IGMP PIM
 
IP Addr/mask      : Not Assigned
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
If Index          : 3                   Virt. If Index    : 3
Last Oper Chg     : 06/18/2007 10:07:01 Global If Index   : 95
Port Id           : n/a
TOS Marking       : Trusted             If Type           : VPRN
SNTP B.Cast       : False
MAC Address       :                     Arp Timeout       : 14400
IP MTU            : 0                   ICMP Mask Reply   : True
Arp Populate      : Disabled            Host Conn Verify  : Disabled
 
Proxy ARP Details
Rem Proxy ARP     : Disabled            Local Proxy ARP   : Disabled
Policies          : none
 
Proxy Neighbor Discovery Details
Local Pxy ND      : Disabled
Policies          : none
 
DHCP Details
Admin State       : Down                Lease Populate    : 0
Gi-Addr           : Not configured      Gi-Addr as Src Ip : Disabled
Action            : Keep                Trusted           : Disabled
 
DHCP Proxy Details
Admin State       : Down
Lease Time        : N/A
Emul. Server      : Not configured
 
Subscriber Authentication Details
Auth Policy       : None
 
DHCP6 Relay Details
Admin State       : Down                Lease Populate    : 0
Oper State        : Down                Nbr Resolution    : Disabled
If-Id Option      : None                Remote Id         : Disabled
Src Addr          : Not configured
 
DHCP6 Server Details
Admin State       : Down                Max. Lease States : 8000
 
ICMP Details
Redirects    : Number - 100                     Time (seconds)   - 10
Unreachables : Number - 100                     Time (seconds)   - 10
TTL Expired  : Number - 100                     Time (seconds)   - 10
 
IPCP Address Extension Details
Peer IP Addr      : Not configured
Peer Pri DNS Addr : Not configured
Peer Sec DNS Addr : Not configured
 
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
If Name           : SpokeSDP
Admin State       : Up                  Oper (v4/v6)      : Down/Down
Protocols         : None
 
IP Addr/mask      : Not Assigned
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
If Index          : 4                   Virt. If Index    : 4
Last Oper Chg     : 06/18/2007 10:07:01 Global If Index   : 94
SDP Id            : spoke-3:4
TOS Marking       : Trusted             If Type           : VPRN
SNTP B.Cast       : False
MAC Address       : 14:30:ff:00:00:00   Arp Timeout       : 14400
IP MTU            : 0                   ICMP Mask Reply   : True
Arp Populate      : Disabled            Host Conn Verify  : Disabled
 
Proxy ARP Details
Rem Proxy ARP     : Disabled            Local Proxy ARP   : Disabled
Policies          : none
 
Proxy Neighbor Discovery Details
Local Pxy ND      : Disabled
Policies          : none
 
DHCP Details
Admin State       : Down                Lease Populate    : 0
Gi-Addr           : Not configured      Gi-Addr as Src Ip : Disabled
Action            : Keep                Trusted           : Disabled
 
DHCP Proxy Details
Admin State       : Down
Lease Time        : N/A
Emul. Server      : Not configured
 
Subscriber Authentication Details
Auth Policy       : None
 
DHCP6 Relay Details
Admin State       : Down                Lease Populate    : 0
Oper State        : Down                Nbr Resolution    : Disabled
If-Id Option      : None                Remote Id         : Disabled
Src Addr          : Not configured
 
DHCP6 Server Details
Admin State       : Down                Max. Lease States : 8000
 
ICMP Details
Redirects    : Number - 100                     Time (seconds)   - 10
Unreachables : Number - 100                     Time (seconds)   - 10
TTL Expired  : Number - 100                     Time (seconds)   - 10
 
IPCP Address Extension Details
Peer IP Addr      : Not configured
Peer Pri DNS Addr : Not configured
Peer Sec DNS Addr : Not configured
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
If Name           : gizmo
Admin State       : Up                  Oper (v4/v6)      : Down/--
Protocols         : None
 
IP Addr/mask      : Not Assigned
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
If Index          : 5                   Virt. If Index    : 5
Last Oper Chg     : 06/18/2007 10:07:01 Global If Index   : 93
SDP Id            : spoke-1:10
TOS Marking       : Trusted             If Type           : VPRN Red
Egress Filter     : none                Ingress Filter    : none
SNTP B.Cast       : False               QoS Policy        : 1
MAC Address       : 14:30:ff:00:00:00
IP MTU            : 0                   ICMP Mask Reply   : True
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
If Name           : test123
Admin State       : Up                  Oper (v4/v6)      : Down/--
Protocols         : None
 
IP Addr/mask      : Not Assigned
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
If Index          : 6                   Virt. If Index    : 6
Last Oper Chg     : 06/18/2007 10:07:01 Global If Index   : 92
Port Id           : n/a
TOS Marking       : Trusted             If Type           : VPRN Red
Egress Filter     : none                Ingress Filter    : none
SNTP B.Cast       : False               QoS Policy        : 1
MAC Address       :
IP MTU            : 0                   ICMP Mask Reply   : True
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
If Name           : test1
Admin State       : Up                  Oper (v4/v6)      : Down/--
Protocols         : None
 
IP Addr/mask      : Not Assigned
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
If Index          : 7                   Virt. If Index    : 7
Last Oper Chg     : 06/18/2007 10:07:01 Global If Index   : 91
Port Id           : n/a
TOS Marking       : Trusted             If Type           : VPRN Red
Egress Filter     : none                Ingress Filter    : none
SNTP B.Cast       : False               QoS Policy        : 1
MAC Address       :
IP MTU            : 0                   ICMP Mask Reply   : True
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
If Name           : bozoclown
Admin State       : Up                  Oper (v4/v6)      : Down/--
Protocols         : None
 
IP Addr/mask      : Not Assigned
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
If Index          : 8                   Virt. If Index    : 8
Last Oper Chg     : 06/18/2007 10:07:01 Global If Index   : 90
Port Id           : n/a
TOS Marking       : Trusted             If Type           : VPRN Red
Egress Filter     : none                Ingress Filter    : none
SNTP B.Cast       : False               QoS Policy        : 1
MAC Address       :
IP MTU            : 0                   ICMP Mask Reply   : True
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
If Name           : testabc
Admin State       : Up                  Oper (v4/v6)      : Down/--
Protocols         : None
 
IP Addr/mask      : Not Assigned
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
If Index          : 9                   Virt. If Index    : 9
Last Oper Chg     : 06/18/2007 10:07:01 Global If Index   : 89
If Type           : VPRN Sub
 
DHCP Details
Gi-Addr           : Not configured      Gi-Addr as Src Ip : Disabled
===============================================================================
Interface testabc group-interfaces
===============================================================================
Interface-Name                   Adm         Opr(v4/v6)  Mode    Port/SapId
   IP-Address                                                    PfxState
-------------------------------------------------------------------------------
bozo                             Up          Down/--     VPRN G* n/a
-------------------------------------------------------------------------------
Group-Interfaces : 1
===============================================================================
* indicates that the corresponding row element may have been truncated.
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
If Name           : bozo
Sub If Name       : testabc
Red If Name       :
Admin State       : Up                  Oper (v4/v6)      : Down/--
Protocols         : None
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
If Index          : 10                  Virt. If Index    : 10
Last Oper Chg     : 06/18/2007 10:07:01 Global If Index   : 88
Port Id           : n/a
TOS Marking       : Trusted             If Type           : VPRN Grp
SNTP B.Cast       : False
MAC Address       :                     Arp Timeout       : 14400
IP MTU            : 0                   ICMP Mask Reply   : True
Arp Populate      : Disabled            Host Conn Verify  : Disabled
 
Proxy ARP Details
Rem Proxy ARP     : Disabled            Local Proxy ARP   : Enabled
Policies          : none
 
Proxy Neighbor Discovery Details
Local Pxy ND      : Disabled
Policies          : none
 
DHCP Details
Admin State       : Down                Lease Populate    : 1
Gi-Addr           : Unknown             Gi-Addr as Src Ip : Disabled
Action            : Keep                Trusted           : Disabled
Match CircId      : Disabled
 
DHCP Proxy Details
Admin State       : Down
Lease Time        : N/A
Emul. Server      : Not configured
 
Subscriber Authentication Details
Auth Policy       : None
 
DHCP6 Relay Details
Admin State       : Down                Lease Populate    : 0
Oper State        : Down                Nbr Resolution    : Disabled
If-Id Option      : None                Remote Id         : Disabled
Src Addr          : Not configured
 
DHCP6 Server Details
Admin State       : Down                Max. Lease States : 8000
 
ICMP Details
Redirects    : Number - 100                     Time (seconds)   - 10
Unreachables : Number - 100                     Time (seconds)   - 10
TTL Expired  : Number - 100                     Time (seconds)   - 10
 
IPCP Address Extension Details
Peer IP Addr      : Not configured
Peer Pri DNS Addr : Not configured
Peer Sec DNS Addr : Not configured
 
PPPoE Details
Last Mgmt Chg: 06/18/2007 10:06:49
Session limit     : 1                   SAP session limit : 1
PPPoE Policy      : N/A
User DB           : N/A
===============================================================================
Service Access Point(Summary), Service 1 Interface bozo
===============================================================================
PortId                 SvcId      Ing.  Ing.    Egr.  Egr.    Anti   Adm  Opr
                                  QoS   Fltr    QoS   Fltr    Spoof
-------------------------------------------------------------------------------
No Service Access Point found.
===============================================================================
Interface
-------------------------------------------------------------------------------
If Name           : santa
Admin State       : Up                  Oper (v4/v6)      : Down/--
Protocols         : None
 
IP Addr/mask      : Not Assigned
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
If Index          : 11                  Virt. If Index    : 11
Last Oper Chg     : 06/18/2007 10:07:01 Global If Index   : 87
If Type           : VPRN Sub
 
DHCP Details
Gi-Addr           : Not configured      Gi-Addr as Src Ip : Disabled
===============================================================================
Interface santa group-interfaces
===============================================================================
Interface-Name                   Adm         Opr(v4/v6)  Mode    Port/SapId
   IP-Address                                                    PfxState
-------------------------------------------------------------------------------
interface                        Up          Down/--     VPRN G* 1/2/4
-------------------------------------------------------------------------------
Group-Interfaces : 1
===============================================================================
* indicates that the corresponding row element may have been truncated.
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
If Name           : interface
Sub If Name       : santa
Red If Name       :
Admin State       : Up                  Oper (v4/v6)      : Down/--
Protocols         : None
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
If Index          : 12                  Virt. If Index    : 12
Last Oper Chg     : 06/18/2007 10:07:01 Global If Index   : 86
Group Port        : 1/2/4
TOS Marking       : Trusted             If Type           : VPRN Grp
SNTP B.Cast       : False
MAC Address       : 14:30:01:02:00:04   Arp Timeout       : 14400
IP MTU            : 1500                ICMP Mask Reply   : True
Arp Populate      : Disabled            Host Conn Verify  : Disabled
 
Proxy ARP Details
Rem Proxy ARP     : Disabled            Local Proxy ARP   : Enabled
Policies          : none
 
Proxy Neighbor Discovery Details
Local Pxy ND      : Disabled
Policies          : none
 
DHCP Details
Admin State       : Down                Lease Populate    : 1
Gi-Addr           : Unknown             Gi-Addr as Src Ip : Disabled
Action            : Keep                Trusted           : Disabled
Match CircId      : Disabled
 
DHCP Proxy Details
Admin State       : Down
Lease Time        : N/A
Emul. Server      : Not configured
 
Subscriber Authentication Details
Auth Policy       : None
 
DHCP6 Relay Details
Admin State       : Down                Lease Populate    : 0
Oper State        : Down                Nbr Resolution    : Disabled
If-Id Option      : None                Remote Id         : Disabled
Src Addr          : Not configured
 
DHCP6 Server Details
Admin State       : Down                Max. Lease States : 8000
 
ICMP Details
Redirects    : Number - 100                     Time (seconds)   - 10
Unreachables : Number - 100                     Time (seconds)   - 10
TTL Expired  : Number - 100                     Time (seconds)   - 10
 
IPCP Address Extension Details
Peer IP Addr      : Not configured
Peer Pri DNS Addr : Not configured
Peer Sec DNS Addr : Not configured
 
PPPoE Details
Last Mgmt Chg: 06/18/2007 10:06:49
Session limit     : 1                   SAP session limit : 1
PPPoE Policy      : N/A
User DB           : N/A
===============================================================================
Service Access Point(Summary), Service 1 Interface interface
===============================================================================
PortId                 SvcId      Ing.  Ing.    Egr.  Egr.    Anti   Adm  Opr
                                  QoS   Fltr    QoS   Fltr    Spoof
-------------------------------------------------------------------------------
1/2/4:0                1          1     none    1     none    ip-mac Up   Down
===============================================================================
*#A:ALA-48#
authentication
Syntax 
authentication
Context 
show>service>id
Description 
This command enables the context to display subscriber authentication information.
statistics
Syntax 
statistics [policy name] [sap sap-id]
Context 
show>service>id>authentication
Description 
This command displays session authentication statistics for this service.
Parameters 
policy name
Specifies the subscriber authentication policy statistics to display.
sap sap-id
Specifies the SAP ID statistics to display. See Common CLI Command Descriptions for command syntax.
Sample Output
*A:ALA-1# show service id 11 authentication statistics
===============================================================
Authentication statistics
===============================================================
Interface / SAP                 Authentication  Authentication
                                Successful      Failed
---------------------------------------------------------------
abc-11-90.1.0.254               1582            3
---------------------------------------------------------------
Number of entries: 1
===============================================================
*A:ALA-1#
arp
Syntax 
arp [ip-address] | [mac ieee-address] | [sap sap-id] | [interface ip-int-name] [sdp sdp-id:vc-id] [summary]
Context 
show>service>id
Description 
Displays the ARP table for the IES instance.
Parameters 
ip-address
Displays only ARP entries in the ARP table with the specified IP address.
Default
mac ieee-address
Displays only ARP entries in the ARP table with the specified 48-bit MAC address. The MAC address can be expressed in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
Default
sap sap-id
Displays SAP information for the specified SAP ID. See Common CLI Command Descriptions for command syntax.
port id
Specifies matching service ARP entries associated with the specified IP interface.
ip-address
The IP address of the interface for which to display matching ARP entries.
Values
ip-int-name
The IP interface name for which to display matching ARPs.
Output 
Show Service-ID ARP
The following table describes show service-id ARP output fields.
 
Sample Output
*A:ALA-12# show service id 2 arp
==============================================================================
ARP Table                                                                      
==============================================================================
IP Address      MAC Address       Type    Age       Interface         Port     
------------------------------------------------------------------------------
190.11.1.1      00:03:fa:00:08:22 Other   00:00:00  ies-100-190.11.1  1/1/11:0 
==============================================================================
*A:ALA-12# 
arp-host
Syntax 
arp-host [wholesaler service-id] [sap sap-id | interface interface-name | ip-address ip-address[/mask] | mac ieee-address | {[port port-id] [no-inter-dest-id | inter-dest-id inter-dest-id]}] [detail]
arp-host statistics [sap sap-id | interface interface-name]
arp-host summary [interface interface-name]
Context 
show>service>id
Description 
This command displays ARP host related information.
Sample Output
*A:Dut-C# show service id 2 arp-host 
===============================================================================
ARP host table, service 2
===============================================================================
IP Address      Mac Address       Sap Id              Remaining           MC   
                                                      Time                Stdby
-------------------------------------------------------------------------------
128.128.1.2     00:80:00:00:00:01 2/1/5:2             00h04m41s                
128.128.1.3     00:80:00:00:00:02 2/1/5:2             00h04m42s                
128.128.1.4     00:80:00:00:00:03 2/1/5:2             00h04m43s                
128.128.1.5     00:80:00:00:00:04 2/1/5:2             00h04m44s                
128.128.1.6     00:80:00:00:00:05 2/1/5:2             00h04m45s                
128.128.1.7     00:80:00:00:00:06 2/1/5:2             00h04m46s                
128.128.1.8     00:80:00:00:00:07 2/1/5:2             00h04m47s                
128.128.1.9     00:80:00:00:00:08 2/1/5:2             00h04m48s                
128.128.1.10    00:80:00:00:00:09 2/1/5:2             00h04m49s                
128.128.1.11    00:80:00:00:00:0a 2/1/5:2             00h04m50s                
-------------------------------------------------------------------------------
Number of ARP hosts : 10
===============================================================================
*A:Dut-C#
 
 
*A:Dut-C# show service id 2 arp-host ip-address 128.128.1.2 detail 
===============================================================================
ARP hosts for service 2
===============================================================================
Service ID           : 2                                                       
IP Address           : 128.128.1.2
MAC Address          : 00:80:00:00:00:01                                       
SAP                  : 2/1/5:2                                                 
Remaining Time       : 00h04m58s                                               
 
Sub-Ident            : "alu_1_2"                                               
Sub-Profile-String   : ""                                                      
SLA-Profile-String   : ""                                                      
App-Profile-String   : ""                                                      
ARP host ANCP-String : ""
ARP host Int Dest Id : ""
RADIUS-User-Name     : "128.128.1.2"
 
Session Timeout (s)  : 301                                                     
Start Time           : 02/09/2009 16:35:07                                     
Last Auth            : 02/09/2009 16:36:34                                     
Last Refresh         : 02/09/2009 16:36:38                                     
Persistence Key      : N/A                                                     
-------------------------------------------------------------------------------
Number of ARP hosts : 1
===============================================================================
*A:Dut-C#
 
 
*A:Dut-C# show service id 2 arp-host statistics                    
==============================================================================
ARP host statistics
==============================================================================
Num Active Hosts             : 20                                             
Received Triggers            : 70                                             
Ignored Triggers             : 10                                             
Ignored Triggers (overload)  : 0                                              
SHCV Checks Forced           : 0                                              
Hosts Created                : 20                                             
Hosts Updated                : 40                                             
Hosts Deleted                : 0                                              
Authentication Requests Sent : 40                                             
==============================================================================
*A:Dut-C#
 
 
*A:Dut-C# show service id 2 arp-host summary    
=============================================================
ARP host Summary, service 2
=============================================================
Sap                    Used        Provided    Admin State                     
-------------------------------------------------------------
sap:2/1/5:2            20          8000        inService     
-------------------------------------------------------------
Number of SAPs : 1
-------------------------------------------------------------
=============================================================
*A:Dut-C#
 
base
Syntax 
base
Context 
show>service>id
Description 
Displays basic information about the service ID including service type, description, SAPs and SDPs.
Output 
Show Service-ID Base
The following table describes show service-id base output fields:
 
 
Sample Output
*A:SetupCLI# show service id 3 base
========================================================================
Service Basic Information
========================================================================
Service Id        : 3                   Vpn Id            : 0
Service Type      : VPRN
Name              : (Not Specified)
Description       : (Not Specified)
Customer Id       : 1
Last Status Change: 10/08/2009 04:55:01
Last Mgmt Change  : 10/08/2009 06:48:38
Admin State       : Down                Oper State        : Down
 
Route Dist.       : None                VPRN Type         : regular
AS Number         : None                Router Id         : 10.20.30.40
ECMP              : Enabled             ECMP Max Routes   : 1
Max IPv4 Routes   : No Limit            Auto Bind         : MPLS
Max IPv6 Routes   : No Limit
Ignore NH Metric  : Disabled
Hash Label        : Enabled
Vrf Target        : None
Vrf Import        : None
Vrf Export        : None
MVPN Vrf Target   : None
MVPN Vrf Import   : None
MVPN Vrf Export   : None
 
SAP Count         : 0                   SDP Bind Count    : 1
------------------------------------------------------------------------
Service Access & Destination Points
------------------------------------------------------------------------
Identifier                               Type         AdmMTU  OprMTU  Adm  Opr
------------------------------------------------------------------------
sdp:2000:1 S(101.101.101.101)            TLDP         1500    1500    Up   Down
========================================================================
*A:SetupCLI#
 
dhcp
Syntax 
dhcp
Context 
show>service>id
Description 
This command enables the context to display DHCP information for the specified service.
lease-state
Syntax 
lease-state [[sap sap-id] [sdp [sdp-id[:vc-id]]] | [interface interface-name] | [ip-address ip-address[/mask]] | [mac ieee-address] | [wholesaler service-id] ] [detail]
Context 
show>service>id>dhcp
Description 
This command displays DHCP lease state related information. Refer to the following for various show command output:
Parameters 
sap-id
Specifies the physical port identifier portion of the SAP definition. See Common CLI Command Descriptions for command syntax.
sdp-id
The SDP identifier.
Values
vc-id
The virtual circuit ID on the SDP ID for which to display information.
Values
interface interface-name
Displays information for the specified IP interface.
ip-address ip-address
Displays information associated with the specified IP address.
detail
Displays detailed information.
wholesaler service-id
The VPRN service ID of the wholesaler. When specified in this context, SAP, SDP, interface, IP address and MAC parameters are ignored.
Values
Lease State Sample Output
Sample Output
*A:ALA-48>config# show service id 101 dhcp lease-state
===============================================================================
DHCP lease state table, service 101
===============================================================================
IP Address      Mac Address       Sap/Sdp Id          Remaining  Lease    MC
                                                      LifeTime   Origin   Stdby
-------------------------------------------------------------------------------
102.1.1.52      00:00:1f:bd:00:bb lag-1:101           00h02m56s  DHCP-R
103.3.2.62      00:00:1f:bd:00:c6 lag-1:105           00h02m59s  Radius
-------------------------------------------------------------------------------
Number of lease states : 2
===============================================================================
*A:ALA-48>config#
 
 
*A:ALA-48>config# show service id 105 dhcp lease-state  wholesaler 101
===============================================================================
DHCP lease state table, service 105
===============================================================================
IP Address      Mac Address       Sap/Sdp Id          Remaining  Lease    MC
                                                      LifeTime   Origin   Stdby
-------------------------------------------------------------------------------
Wholesaler 101 Leases
-------------------------------------------------------------------------------
103.3.2.62      00:00:1f:bd:00:c6 lag-1:105           00h00m39s  Radius
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
*A:ALA-48>config#
Routed CO Sample Output
A:ALA-_Dut-A# show service id 13 dhcp lease-state 
===============================================================================
DHCP lease state table, service 13
===============================================================================
IP Address      Mac Address       Sap/Sdp Id          Remaining  Lease    MC   
                                                      LifeTime   Origin   Stdby
-------------------------------------------------------------------------------
13.13.40.1      00:00:00:00:00:13 1/1/1:13            00h00m58s  Radius        
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
A:ALA-_Dut-A# 
 
A:ALA-_Dut-A# show service id 13 dhcp lease-state detail 
===============================================================================
DHCP lease states for service 13
===============================================================================
Service ID           : 13                                                      
IP Address           : 13.13.40.1
Mac Address          : 00:00:00:00:00:13                                       
Subscriber-interface : ies-13-13.13.1.1                                        
Group-interface      : intf-13                                                 
SAP                  : 1/1/1:13                                                
Remaining Lifetime   : 00h00m58s                                               
Persistence Key      : N/A                                                     
 
Sub-Ident            : "TEST"                                              
Sub-Profile-String   : "ADSL GO"                                               
SLA-Profile-String   : "BE-Video"                                              
Lease ANCP-String    : ""
 
Sub-Ident origin     : Radius                                                  
Strings origin       : Radius                                                  
Lease Info origin    : Radius                                                  
 
Ip-Netmask           : 255.255.0.0                                             
Broadcast-Ip-Addr    : 13.13.255.255                                           
Default-Router       : N/A                                                     
Primary-Dns          : 13.13.254.254                                           
Secondary-Dns        : 13.13.254.253                                           
 
ServerLeaseStart     : 12/24/2006 23:48:23                                     
ServerLastRenew      : 12/24/2006 23:48:23                                     
ServerLeaseEnd       : 12/24/2006 23:49:23                                     
Session-Timeout      : 0d 00:01:00                                             
DHCP Server Addr     : N/A                                                     
 
Persistent Relay Agent Information
  Circuit Id         : ancstb6_Dut-A|13|intf-13|0|13
  Remote Id          : stringtest
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
A:ALA-_Dut-A# 
Wholesaler/Retailer Sample Output
A:ALA-_Dut-A# show service id 2000 dhcp lease-state detail 
===============================================================================
DHCP lease states for service 2000
===============================================================================
Wholesaler 1000 Leases
-------------------------------------------------------------------------------
Service ID           : 1000                                                    
IP Address           : 13.13.1.254
Mac Address          : 00:00:00:00:00:13                                       
Subscriber-interface : whole-sub                                               
Group-interface      : intf-13                                                 
Retailer             : 2000                                                    
Retailer If          : retail-sub                                              
SAP                  : 1/1/1:13                                                
Remaining Lifetime   : 00h09m59s                                               
Persistence Key      : N/A                                                     
 
Sub-Ident            : "TEST"                                              
Sub-Profile-String   : "ADSL GO"                                               
SLA-Profile-String   : "BE-Video"                                              
Lease ANCP-String    : ""
 
Sub-Ident origin     : Retail DHCP                                             
Strings origin       : Retail DHCP                                             
Lease Info origin    : Retail DHCP                                             
 
Ip-Netmask           : 255.255.0.0                                             
Broadcast-Ip-Addr    : 13.13.255.255                                           
Default-Router       : N/A                                                     
Primary-Dns          : N/A                                                     
Secondary-Dns        : N/A                                                     
 
ServerLeaseStart     : 12/25/2006 00:29:41                                     
ServerLastRenew      : 12/25/2006 00:29:41                                     
ServerLeaseEnd       : 12/25/2006 00:39:41                                     
Session-Timeout      : 0d 00:10:00                                             
DHCP Server Addr     : 10.232.237.2                                            
 
Persistent Relay Agent Information
  Circuit Id         : 1/1/1:13
  Remote Id          : stringtest
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
A:ALA-_Dut-A# 
statistics
Syntax 
statistics [sap sap-id]
statistics [sdp sdp-id:vc-id]
statistics [interface interface-name]
Context 
show>service>id>dhcp
Description 
Displays DHCP statistics information.
Parameters 
sap-id
Specifies the physical port identifier portion of the SAP definition. See Common CLI Command Descriptions for command syntax.
sdp-id
The SDP identifier.
Values
vc-id
The virtual circuit ID on the SDP ID for which to display information.
Values
interface interface-name
Displays information for the specified IP interface.
 
Show DHCP Statistics Output
The following table describes the output fields for DHCP statistics.
 
Sample Output
A:sim1# show service id 11 dhcp statistics
================================================================
DHCP Global Statistics, service 11
================================================================
Rx Packets                        : 32                         
Tx Packets                        : 12                         
Rx Malformed Packets              : 0                          
Rx Untrusted Packets              : 0                          
Client Packets Discarded          : 0                          
Client Packets Relayed            : 11                         
Client Packets Snooped            : 21                         
Server Packets Discarded          : 0                          
Server Packets Relayed            : 0                          
Server Packets Snooped            : 0                          
================================================================
A:sim1#
gsmp
Syntax 
gsmp
Context 
show>service>id
Description 
This command displays GSMP information.
neighbors
Syntax 
neighbors group [name] [ip-address]
Context 
show>service>id>gsmp
Description 
This command displays GSMP neighbor information.
Parameters 
group
A GSMP group defines a set of GSMP neighbors which have the same properties.
name
Specifies a GSMP group name is unique only within the scope of the service in which it is defined.
ip-address
Specifies the ip-address of the neighbor.
Sample Output
These commands show the configured neighbors per service, regardless of the fact there exists an open TCP connection with this neighbor. The admin state is shown because for a neighbor to be admin enabled, the service, gsmp node, group node and the neighbor node in this service must all be in 'no shutdown' state. Session gives the number of session (open TCP connections) for each configured neighbor.
A:active>show>service>id>gsmp# neighbors
============================================================================
GSMP neighbors
============================================================================
Group                           Neighbor           AdminState  Sessions
----------------------------------------------------------------------------
dslam1                          192.168.1.2       Enabled     0
dslam1                          192.168.1.3       Enabled     0
----------------------------------------------------------------------------
Number of neighbors shown: 2
============================================================================
A:active>show>service>id>gsmp# 
 
A:active>show>service>id>gsmp# neighbors group dslam1
============================================================================
GSMP neighbors
============================================================================
Group                           Neighbor           AdminState  Sessions
----------------------------------------------------------------------------
dslam1                          192.168.1.2       Enabled     0
dslam1                          192.168.1.3       Enabled     0
----------------------------------------------------------------------------
Number of neighbors shown: 2
============================================================================
A:active>show>service>id>gsmp#
 
A:active>show>service>id>gsmp# neighbors group dslam1 192.168.1.2
============================================================================
GSMP neighbors
============================================================================
Group                           Neighbor           AdminState  Sessions
----------------------------------------------------------------------------
dslam1                          192.168.1.2       Enabled     0
============================================================================
A:active>show>service>id>gsmp#
sessions
Syntax 
sessions [group name] neighbor ip-address] [port port-number] [association] [statistics]
Context 
show>service>id>gsmp
Description 
This command displays GSMP sessions information.
Parameters 
group
A GSMP group defines a set of GSMP neighbors which have the same properties.
name
Specifies a GSMP group name is unique only within the scope of the service in which it is defined.
ip-address
Specifies the ip-address of the neighbor.
port
Specifies the neighbor TCP port number use for this ANCP session.
Values
association
Displays to what object the ANCP-string is associated.
statistics
Displays statistics information about an ANCP session known to the system.
Sample Output
This show command gives information about the open TCP connections with DSLAMs.
A:active>show>service>id>gsmp# sessions
=======================================================
GSMP sessions for service 999 (VPRN)
=======================================================
Port   Ngbr-IpAddr     Gsmp-Group
-------------------------------------------------------
40590  192.168.1.2     dslam1
-------------------------------------------------------
Number of GSMP sessions : 1
=======================================================
A:active>show>service>id>gsmp#
 
 
A:active>show>service>id>gsmp# sessions neighbor 192.168.1.2 port 40590
=========================================================================
GSMP sessions for service 999 (VPRN), neighbor 192.168.1.2, Port 40590
=========================================================================
State           : Established
Peer Instance   : 1                  Sender Instance : a3cf58
Peer Port       : 0                  Sender Port     : 0
Peer Name       : 12:12:12:12:12:12  Sender Name     : 00:00:00:00:00:00
timeouts        : 0                  Max. Timeouts   : 3
Peer Timer      : 100                Sender Timer    : 100
Capabilities      : DTD OAM
Conf Capabilities : DTD OAM
Priority Marking  : dscp nc2
Local Addr.       : 192.168.1.4
Conf Local Addr.  : N/A
=========================================================================
A:active>show>service>id>gsmp# 
 
 
A:active>show>service>id>gsmp# sessions neighbor 192.168.1.2 port 40590 association
===============================================================================
ANCP-Strings
===============================================================================
ANCP-String                                                 Assoc. State
-------------------------------------------------------------------------------
No ANCP-Strings found
===============================================================================
A:active>show>service>id>gsmp# 
 
 
A:active>show>service>id>gsmp# sessions neighbor 192.168.1.2 port 40590 statistics
===============================================================
GSMP session stats, service 999 (VPRN), neighbor 192.168.1.2, Port 40590
===============================================================
Event                                   Received  Transmitted
---------------------------------------------------------------
Dropped                                 0         0
Syn                                     1         1
Syn Ack                                 1         1
Ack                                     14        14
Rst Ack                                 0         0
Port Up                                 0         0
Port Down                               0         0
OAM Loopback                            0         0
===============================================================
A:active>show>service>id>gsmp# 
 
Note: The association command gives an overview of each ANCP string received from this session.
A:active>show>service>id>gsmp# sessions neighbor 192.168.1.2 port 40590 association
===============================================================================
ANCP-Strings
===============================================================================
ANCP-String                                                     Assoc. 
State
-------------------------------------------------------------------------------
7330-ISAM-E47 atm 1/1/01/01:19425.64048                         ANCP    Up
-------------------------------------------------------------------------------
Number of ANCP-Strings : 1
===============================================================================
A:active>show>service>id>gsmp# 
host
Syntax 
host [sap sap-id] [detail]
host summary
host [detail] wholesaler service-id
Context 
show>service>id
Description 
This command displays static host information configured on this service.
Parameters 
sap-id
Specifies the physical port identifier portion of the SAP definition. See Common CLI Command Descriptions for command syntax.
summary
Displays summary host information.
wholesaler service-id
The service ID of the wholesaler.
Values
summary
Syntax 
summary
Context 
show>service>id>dhcp
Description 
This command displays DHCP configuration summary information.
Show Service-ID DHCP Summary
The following table describes show service-id DHCP summary output fields:
 
Sample Output
A:ALA-49# show service id 1 dhcp summary
===============================================================================
DHCP Summary, service 1
===============================================================================
Interface Name                   Arp      Used/                 Info    Admin
  SapId/Sdp                      Populate Provided              Option  State
-------------------------------------------------------------------------------
SpokeSDP                         No       0/0                   Keep    Up
   sdp:spoke-3:4                          0/0
test                             No       0/0                   Keep    Up
   sap:1/1/4:50/5                         0/0
to-ce1                           No       0/0                   Keep    Up
   sap:1/1/10:1                           0/0
-------------------------------------------------------------------------------
Interfaces: 3
===============================================================================
A:ALA-49#
interface
Syntax 
interface [ip-address | ip-int-name] [interface-type] [detail] [family]}| summary]
Context 
show>service>id
Description 
Displays information for the IP interfaces associated with the service.
If no optional parameters are specified, a summary of all IP interfaces associated to the service are displayed.
Parameters 
ip-address
The IP address of the interface for which to display information.
Values
ip-int-name
The IP interface name for which to display information.
family
Specifies the family to display.
Values
interface-type
Specifies the interface type.
Values
detail
Displays detailed IP interface information.
Default
Output 
Show Service-ID Interface
The following table describes show service-id interface output fields:
 
 
Sample Output
*A:ALA-12# show service id 321 interface
===============================================================================
Interface Table
===============================================================================
Interface-Name                   Type IP-Address         Adm    Opr  Type
-------------------------------------------------------------------------------
test                             Pri  190.11.1.1/24      Up     Up   IES
-------------------------------------------------------------------------------
Interfaces : 1
===============================================================================
*A:ALA-12#
 
 
A:ALA-49# show service id 88 interface detail
===============================================================================
Interface Table
===============================================================================
Interface
-------------------------------------------------------------------------------
If Name      : Sector A
Admin State  : Up                               Oper State       : Down
Protocols    : None
 
IP Addr/mask : Not Assigned
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Description  :
If Index     : 26                               Virt. If Index   : 26
SAP Id       : 7/1/1.2.2
TOS Marking  : Untrusted                        If Type          : IES
SNTP B.Cast  : False                            IES ID           : 88
MAC Address  : Not configured.                  Arp Timeout      : 14400
IP MTU       : 1500                             ICMP Mask Reply  : True
Arp Populate : Disabled
Cflowd       : None
 
Proxy ARP Details
Proxy ARP    : Enabled                          Local Proxy ARP  : Disabled
Policies     : ProxyARP
 
DHCP Details
Admin State  : Up                               Lease Populate   : 0
Action       : Keep                             Trusted          : Disabled
ICMP Details
Redirects    : Number - 100                     Time (seconds)   - 10
Unreachables : Number - 100                     Time (seconds)   - 10
TTL Expired  : Number - 100                     Time (seconds)   - 10
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
If Name      : test
Admin State  : Up                               Oper State       : Down
Protocols    : None
IP Addr/mask : Not Assigned
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Description  :
If Index     : 27                               Virt. If Index   : 27
SAP Id       : 10/1/2:0
TOS Marking  : Untrusted                        If Type          : IES
SNTP B.Cast  : False                            IES ID           : 88
MAC Address  : Not configured.                  Arp Timeout      : 14400
IP MTU       : 1500                             ICMP Mask Reply  : True
Arp Populate : Disabled
Cflowd       : None
 
Proxy ARP Details
Proxy ARP    : Disabled                         Local Proxy ARP  : Disabled
 
DHCP Details
Admin State  : Up                               Lease Populate   : 0
Action       : Keep                             Trusted          : Disabled
 
ICMP Details
Redirects    : Number - 100                     Time (seconds)   - 10
Unreachables : Number - 100                     Time (seconds)   - 10
TTL Expired  : Number - 100                     Time (seconds)   - 10
-------------------------------------------------------------------------------
Interfaces : 2
===============================================================================
A:ALA-49#
 
 
*A:SetupCLI# show service id 3 interface "ab" detail
========================================================================
Interface Table
========================================================================
------------------------------------------------------------------------
Interface
------------------------------------------------------------------------
If Name      : ab
Admin State  : Up                               Oper (v4/v6)     : Down/--
Protocols    : None
 
IP Addr/mask : Not Assigned
------------------------------------------------------------------------
Details
------------------------------------------------------------------------
Description  : (Not Specified)
If Index     : 2                                Virt. If Index   : 2
Last Oper Chg: 10/08/2009 07:07:58              Global If Index  : 329
SDP Id       : spoke-2000:1
 
Spoke-SDP Details
Admin State  : Up                               Oper State       : Down
Hash Label   : Enabled
Flags              : SvcAdminDown SdpOperDown
                     NoIngVCLabel NoEgrVCLabel
 
TOS Marking  : Trusted                          If Type          : VPRN
SNTP B.Cast  : False
MAC Address  : 76:6d:ff:00:00:00                Arp Timeout      : 14400
IP Oper MTU  : 0                                ICMP Mask Reply  : True
Arp Populate : Disabled                         Host Conn Verify : Disabled
Cflowd       : None
LdpSyncTimer : None
LSR Load Bal*: system
uRPF Chk     : disabled
uRPF Fail By*: 0                                uRPF Chk Fail Pk*: 0
 
Proxy ARP Details
Rem Proxy ARP: Disabled                         Local Proxy ARP  : Disabled
Policies     : none
 
Proxy Neighbor Discovery Details
Local Pxy ND : Disabled
Policies     : none
 
DHCP no local server
 
DHCP Details
Description  : (Not Specified)
Admin State  : Down                             Lease Populate   : 0
Gi-Addr      : Not configured                   Gi-Addr as Src Ip: Disabled
Action       : Keep                             Trusted          : Disabled
 
DHCP Proxy Details
Admin State  : Down
Lease Time   : N/A
Emul. Server : Not configured
 
Subscriber Authentication Details
Auth Policy  : None
 
DHCP6 Relay Details
Description  : (Not Specified)
Admin State  : Down                             Lease Populate   : 0
Oper State   : Down                             Nbr Resolution   : Disabled
If-Id Option : None                             Remote Id        : Disabled
Src Addr     : Not configured
 
DHCP6 Server Details
Admin State  : Down                             Max. Lease States: 8000
 
ICMP Details
Redirects    : Number - 100                     Time (seconds)   - 10
Unreachables : Number - 100                     Time (seconds)   - 10
TTL Expired  : Number - 100                     Time (seconds)   - 10
 
IPCP Address Extension Details
Peer IP Addr*: Not configured
Peer Pri DNS*: Not configured
Peer Sec DNS*: Not configured
 
Routed VPLS Details
VPLS Name    :                                  Binding Status   : Up
------------------------------------------------------------------------
Interfaces : 1
========================================================================
* indicates that the corresponding row element may have been truncated.
*A:SetupCLIp#
 
 
The Oper Hash Label and Hash Lbl Sig Cap spoke-sdp fields display when signal-capability is enabled and operational state of hash-label in datapath.
 
------------------------------------------------------------------------
Service Destination Points(SDPs)      
------------------------------------------------------------------------
------------------------------------------------------------------------
 Sdp Id 1:555  -(2.2.2.2)  
------------------------------------------------------------------------
Description     : (Not Specified)
SDP Id             : 1:555                    Type              : Spoke
Spoke Descr     : (Not Specified)
VC Type            : Ether                    VC Tag            : n/a
Admin Path MTU     : 0                        Oper Path MTU     : 1568
Far End            : 2.2.2.2                  Delivery          : MPLS
Tunnel Far End     : n/a                      LSP Types         : RSVP
Hash Label         : Disabled                 Hash Lbl Sig Cap  : Disabled
Oper Hash Label    : Disabled                 
 
Admin State        : Up                       Oper State        : Up
Acct. Pol          : None                     Collect Stats     : Disabled
Ingress Label      : 131065                   Egress Label      : 131059
Ingr Mac Fltr-Id   : n/a                      Egr Mac Fltr-Id   : n/a
Ingr IP Fltr-Id    : n/a                      Egr IP Fltr-Id    : n/a
Ingr IPv6 Fltr-Id  : n/a                      Egr IPv6 Fltr-Id  : n/a
Admin ControlWord  : Not Preferred            Oper ControlWord  : False
Admin BW(Kbps)     : 0                        Oper BW(Kbps)     : 0
Last Status Change : 11/25/2010 13:06:14      Signaling         : TLDP
Last Mgmt Change   : 11/24/2010 13:00:48      Force Vlan-Vc     : Disabled
Endpoint           : N/A                      Precedence        : 4
PW Status Sig      : Enabled                  
Class Fwding State : Down                     
Flags              : None
Peer Pw Bits       : None
Peer Fault Ip      : None                     
Peer Vccv CV Bits  : lspPing
Peer Vccv CC Bits  : mplsRouterAlertLabel
Application Profile: None                     
Standby Sig Slave  : False    
 
……
……
========================================================================
 
retailers
Syntax 
retailers
Context 
show>service>id
Description 
This command displays the service ID of the retailer subscriber service to which this DHCP lease belongs.
Sample Output
*A:ALA-48>config# show service id 101 retailers
===============================================================================
Retailers for service 101
===============================================================================
Retailer Svc ID               Num Static Hosts         Num Dynamic Hosts
-------------------------------------------------------------------------------
102                           3                        1
105                           0                        1
-------------------------------------------------------------------------------
Number of retailers : 2
===============================================================================
*A:ALA-48>config#
wholesalers
Syntax 
wholesalers
Context 
show>service>id
Description 
This command displays service wholesaler information.
Sample Output
*A:ALA-48>config# show service id 102 wholesalers
===============================================================================
Wholesalers for service 102
===============================================================================
Wholesaler Svc ID             Num Static Hosts         Num Dynamic Hosts
-------------------------------------------------------------------------------
101                           3                        1
-------------------------------------------------------------------------------
Number of wholesalers : 1
===============================================================================
*A:ALA-48>config#
 
Wholesaler information can also be displayed in the lease-state context.
*A:ALA-48>config# show service id 105 dhcp lease-state  wholesaler 101
===============================================================================
DHCP lease state table, service 105
===============================================================================
IP Address      Mac Address       Sap/Sdp Id          Remaining  Lease    MC
                                                      LifeTime   Origin   Stdby
-------------------------------------------------------------------------------
Wholesaler 101 Leasesok
-------------------------------------------------------------------------------
103.3.2.62      00:00:1f:bd:00:c6 lag-1:105           00h00m39s  Radius
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
*A:ALA-48>config#
sap
Syntax 
sap sap-id [detail]]
Context 
show>service>id
Description 
Displays information for the SAPs associated with the service.
If no optional parameters are specified, a summary of all associated SAPs is displayed.
Parameters 
sap-id
The ID that displays SAPs for the service. See Common CLI Command Descriptions for command syntax.
detail
Displays detailed information for the SAP.
Output 
Show Service-ID SAP
The following table describes show service SAP fields:
Sample Output
Specifies an Ethernet type II Ethertype value.
*A:ALA-12# show service id 321 sap 1/1/4:0
===============================================================================
Service Access Points(SAP)
===============================================================================
Service Id         : 321
SAP                : 1/1/4:0                 Encap             : q-tag
Dot1Q Ethertype    : 0x8100                   QinQ Ethertype    : 0x8100
Admin State        : Up                       Oper State        : Down
Flags              : PortOperDown
                     SapIngressQoSMismatch
Last Status Change : 02/03/2007 12:58:37
Last Mgmt Change   : 02/03/2007 12:59:10
Admin MTU          : 1518                     Oper MTU          : 1518
Ingress qos-policy : 100                      Egress qos-policy : 1
Ingress Filter-Id  : n/a                      Egress Filter-Id  : n/a
Multi Svc Site     : None
Acct. Pol          : None                     Collect Stats     : Disabled
===============================================================================
*A:ALA-12# 
 
 
*A:ALA-12# show service id 321 sap 1/1/4:0 detail
===============================================================================
Service Access Points(SAP)
===============================================================================
Service Id         : 321
SAP                : 1/1/4:0                 Encap             : q-tag
Dot1Q Ethertype    : 0x8100                   QinQ Ethertype    : 0x8100
 
Admin State        : Up                       Oper State        : Down
Flags              : PortOperDown
                     SapIngressQoSMismatch
Last Status Change : 02/03/2007 12:58:37
Last Mgmt Change   : 02/03/2007 12:59:10
Admin MTU          : 1518                     Oper MTU          : 1518
Ingress qos-policy : 100                      Egress qos-policy : 1
Ingress Filter-Id  : n/a                      Egress Filter-Id  : n/a
Multi Svc Site     : None
Acct. Pol          : None                     Collect Stats     : Disabled
-------------------------------------------------------------------------------
Sap Statistics
-------------------------------------------------------------------------------
                        Packets                 Octets
Forwarding Engine Stats
Dropped               : 0                       0
Off. HiPrio           : 0                       0
Off. LowPrio          : 0                       0
Off. Uncolor          : 0                       0
 
Queueing Stats(Ingress QoS Policy 100)
Dro. HiPrio           : 0                       0
Dro. LowPrio          : 0                       0
For. InProf           : 0                       0
For. OutProf          : 0                       0
 
Queueing Stats(Egress QoS Policy 1)
Dro. InProf           : 0                       0
Dro. OutProf          : 0                       0
For. InProf           : 0                       0
For. OutProf          : 0                       0
-------------------------------------------------------------------------------
Sap per Queue stats
-------------------------------------------------------------------------------
                        Packets                 Octets
 
Ingress Queue 1 (Unicast) (Priority)
Off. HiPrio           : 0                       0
Off. LoPrio           : 0                       0
Dro. HiPrio           : 0                       0
Dro. LoPrio           : 0                       0
For. InProf           : 0                       0
For. OutProf          : 0                       0
 
Ingress Queue 10 (Unicast) (Priority)
Off. HiPrio           : 0                       0
Off. LoPrio           : 0                       0
Dro. HiPrio           : 0                       0
Dro. LoPrio           : 0                       0
For. InProf           : 0                       0
For. OutProf          : 0                       0
,,,
------------------------------------------------------------------------------- 
ATM SAP Configuration Information
-------------------------------------------------------------------------------
Ingress TD Profile : 1 Egress TD Profile : 1
Alarm Cell Handling : Enabled AAL-5 Encap : VC-MUX
-------------------------------------------------------------------------------
...
=============================================================================
*A:ALA-12#
sdp
Syntax 
sdp [sdp-id | far-end ip-addr] [detail]
Context 
show>service>id
Description 
Displays information for the SDPs associated with the service. If no optional parameters are specified, a summary of all associated SDPs is displayed.
Parameters 
sdp-id
Displays only information for the specified SDP ID.
Default
Values
far-end ip-addr
Displays only SDPs matching with the specified far-end IP address.
Default
detail
Displays detailed SDP information.
Output 
Show Service-ID SDP
The following table describes show service-id SDP output fields:
 
Sample Output
A:Dut-A# show service id  1 sdp detail 
===============================================================================
Services: Service Destination Points Details 
===============================================================================
 Sdp Id 1:1  -(10.20.1.2)  
-------------------------------------------------------------------------------
Description     : Default sdp description
SDP Id             : 1:1                      Type              : Spoke        
VC Type            : Ether                    VC Tag            : n/a          
Admin Path MTU     : 0                        Oper Path MTU     : 9186         
Far End            : 10.20.1.2                Delivery          : MPLS         
 
Admin State        : Up                       Oper State        : Up           
Acct. Pol          : None                     Collect Stats     : Disabled     
Ingress Label      : 2048                     Egress Label      : 2048         
Ing mac Fltr       : n/a                      Egr mac Fltr      : n/a          
Ing ip Fltr        : n/a                      Egr ip Fltr       : n/a          
Ing ipv6 Fltr      : n/a                      Egr ipv6 Fltr     : n/a          
Admin ControlWord  : Not Preferred            Oper ControlWord  : False        
Last Status Change : 05/31/2007 00:45:43      Signaling         : None         
Last Mgmt Change   : 05/31/2007 00:45:43                                       
Class Fwding State : Up                                                        
Flags              : None
Peer Pw Bits       : None
Peer Fault Ip      : None                                                      
Peer Vccv CV Bits  : None
Peer Vccv CC Bits  : None
Max Nbr of MAC Addr: No Limit                 Total MAC Addr    : 0            
Learned MAC Addr   : 0                        Static MAC Addr   : 0            
 
MAC Learning       : Enabled                  Discard Unkwn Srce: Disabled     
MAC Aging          : Enabled                                                   
L2PT Termination   : Disabled                 BPDU Translation  : Disabled     
MAC Pinning        : Disabled                                                  
 
KeepAlive Information :
Admin State        : Disabled                 Oper State        : Disabled     
Hello Time         : 10                       Hello Msg Len     : 0            
Max Drop Count     : 3                        Hold Down Time    : 10           
 
Statistics            :
I. Fwd. Pkts.      : 0                        I. Dro. Pkts.     : 0            
I. Fwd. Octs.      : 0                        I. Dro. Octs.     : 0            
E. Fwd. Pkts.      : 0                        E. Fwd. Octets    : 0            
MCAC Policy Name   :                                                           
MCAC Max Unconst BW: no limit                 MCAC Max Mand BW  : no limit     
MCAC In use Mand BW: 0                        MCAC Avail Mand BW: unlimited    
MCAC In use Opnl BW: 0                        MCAC Avail Opnl BW: unlimited    
 
Associated LSP LIST :
Lsp Name           : A_B_1                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m35s                                                 
 
Lsp Name           : A_B_2                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m35s                                                 
 
Lsp Name           : A_B_3                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m34s                                                 
 
Lsp Name           : A_B_4                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m34s                                                 
 
Lsp Name           : A_B_5                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m34s                                                 
 
Lsp Name           : A_B_6                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m34s                                                 
 
Lsp Name           : A_B_7                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m34s                                                 
 
Lsp Name           : A_B_8                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m35s                                                 
 
Lsp Name           : A_B_9                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m34s                                                 
 
Lsp Name           : A_B_10                                                    
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m34s 
-------------------------------------------------------------------------------
Class-based forwarding :
-------------------------------------------------------------------------------
Class forwarding   : enabled                                                   
Default LSP        : A_B_10                   Multicast LSP     : A_B_9 
===============================================================================
FC Mapping Table
===============================================================================
FC Name             LSP Name                                                   
-------------------------------------------------------------------------------
af                  A_B_3                                                      
be                  A_B_1                                                      
ef                  A_B_6                                                      
h1                  A_B_7                                                      
h2                  A_B_5                                                      
l1                  A_B_4                                                      
l2                  A_B_2                                                      
nc                  A_B_8                                                      
===============================================================================
Stp Service Destination Point specifics
-------------------------------------------------------------------------------
Mac Move           : Blockable                                                 
Stp Admin State    : Up                       Stp Oper State    : Down         
Core Connectivity  : Down                                                      
Port Role          : N/A                      Port State        : Forwarding   
Port Number        : 2049                     Port Priority     : 128          
Port Path Cost     : 10                       Auto Edge         : Enabled      
Admin Edge         : Disabled                 Oper Edge         : N/A          
Link Type          : Pt-pt                    BPDU Encap        : Dot1d        
Root Guard         : Disabled                 Active Protocol   : N/A          
Last BPDU from     : N/A                                                       
Designated Bridge  : N/A                      Designated Port Id: 0            
 
Fwd Transitions    : 0                        Bad BPDUs rcvd    : 0            
Cfg BPDUs rcvd     : 0                        Cfg BPDUs tx      : 0            
TCN BPDUs rcvd     : 0                        TCN BPDUs tx      : 0            
RST BPDUs rcvd     : 0                        RST BPDUs tx      : 0            
-------------------------------------------------------------------------------
Number of SDPs : 1
-------------------------------------------------------------------------------
* indicates that the corresponding row element may have been truncated.
-------------------------------------------------------------------------------
A:Dut-A# 
subscriber-hosts
Syntax 
subscriber-hosts [sap sap-id ] [ip ip-address[/mask]] [mac ieee-address] [sub-profile sub-profile-name] [sla-profile sla-profile-name] [detail]
subscriber-hosts [detail] wholesaler service-id
Context 
show>service>id
Description 
This command displays subscriber host information.
Parameters 
sap sap-id
Displays the specified subscriber host SAP information. See Common CLI Command Descriptions for command syntax.
ip-address/mask
The IP address of the IP interface. The ip-address portion of the address command specifies the IP host address that will be used by the IP interface within the subnet. This address must be unique within the subnet and specified in dotted decimal notation.
Values
ieee-address
Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
sub-profile sub-profile-name
Specifies an existing subscriber profile name to be associated with the static subscriber host. The subscriber profile is configured in the config>subscr-mgmt>sub-profile context.
sla-profile sla-profile-name
Specifies an existing SLA profile name to be associated with the static subscriber host. The SLA profile is configured in the config>subscr-mgmt>sla-profile context.
detail
Displays detailed information.
wholesaler service-id
The VPRN service ID of the wholesaler.
Values
aggregate
Syntax 
aggregate [active]
Context 
show>router
Description 
This command displays aggregated routes.
Parameters 
active
This keyword filters out inactive aggregates.
Output 
Show Aggregate Output Fields
The following table describes router aggregate output fields.
Displays the destination address of the aggregate route in dotted decimal notation.
Sample Output
*A:ALA-12# show router 3 aggregate
==============================================================================
Aggregates (Service: 3)
==============================================================================
Prefix                Summary  AS Set   Aggr AS     Aggr IP-Address   State
------------------------------------------------------------------------------
------------------------------------------------------------------------------
No. of Aggregates: 0
-----------------------------------------------------------
*A:ALA-12#
 
*A:Dut-A>config>router# show router aggregate
 
===============================================================================
Aggregates (Router: Base)
===============================================================================
Prefix Aggr IP-Address Aggr AS
Summary AS Set State
NextHop NextHopType
-------------------------------------------------------------------------------
1.2.3.0/24 0.0.0.0 0
False False Inactive
2.2.2.2 Indirect
 
2.2.0.0/16 0.0.0.0 0
False False Active
None
-------------------------------------------------------------------------------
No. of Aggregates: 2
===============================================================================
 
 
*A:CPM133>config>router# show router aggregate
 
===============================================================================
Aggregates (Router: Base)
===============================================================================
Prefix                                          Aggr IP-Address   Aggr AS
   Summary                                         AS Set          State
     NextHop                                     Community      NextHopType
-------------------------------------------------------------------------------
10.0.0.0/8                                       0.0.0.0          0
   False                                           False           Inactive
                                                 100:33         Blackhole
-------------------------------------------------------------------------------
No. of Aggregates: 1
===============================================================================
 
arp
Syntax 
arp [ip-address | ip-int-name | mac ieee-mac-addr]
Context 
show>router
Description 
This command displays the router ARP table sorted by IP address.
If no command line options are specified, all ARP entries are displayed.
Parameters 
ip-addr
Only displays ARP entries associated with the specified IP address.
ip-int-name
Only displays ARP entries associated with the specified IP interface name.
mac ieee-mac-addr
Only displays ARP entries associated with the specified MAC address.
Output 
ARP Table Output
The following table describes ARP table output fields:
Sample Output
*A:ALA-12# show router 3 arp
===============================================================================
ARP Table (Service: 3)
===============================================================================
IP Address      MAC Address       Expiry    Type   Interface
-------------------------------------------------------------------------------
10.10.10.103    04:67:ff:00:00:01 00h00m00s Oth    system
10.10.4.3       00:00:00:00:00:00 00h00m00s Oth    ALA-1-2
10.10.5.3       00:00:00:00:00:00 00h00m00s Oth    ALA-1-3
10.10.7.3       00:00:00:00:00:00 00h00m00s Oth    ALA-1-5
10.10.0.16      00:00:00:00:00:00 00h00m00s Oth    bozo
10.10.3.3       00:00:00:00:00:00 00h00m00s Oth    gizmo
10.10.2.3       00:00:00:00:00:00 00h00m00s Oth    hobo
10.10.1.17      00:00:00:00:00:00 00h00m00s Oth    int-cflowd
10.0.0.92       00:00:00:00:00:00 04h00m00s Dyn    to-104
10.0.0.103      04:67:01:01:00:01 00h00m00s Oth[I] to-104
10.0.0.104      04:68:01:01:00:01 03h59m49s Dyn[I] to-104
10.10.36.2      00:00:00:00:00:00 00h00m00s Oth    tuesday
192.168.2.98    00:03:47:c8:b4:86 00h14m37s Dyn[I] management
192.168.2.103   00:03:47:dc:98:1d 00h00m00s Oth[I] management
-------------------------------------------------------------------------------
No. of ARP Entries: 14
===============================================================================
*A:ALA-12# 
 
 
*A:ALA-12# show router 3 arp 10.10.0.3
===============================================================================
ARP Table                                                                      
===============================================================================
IP Address      MAC Address       Expiry    Type   Interface
-------------------------------------------------------------------------------
10.10.0.3       04:5d:ff:00:00:00 00:00:00  Oth    system                         
===============================================================================
*A:ALA-12#
 
 
*A:ALA-12# show router 3 arp to-ser1
===============================================================================
ARP Table                                                                      
===============================================================================
IP Address      MAC Address       Expiry    Type   Interface
-------------------------------------------------------------------------------
10.10.13.1      04:5b:01:01:00:02 03:53:09  Dyn    to-ser1                        
===============================================================================
*A:ALA-12#
damping
Syntax 
damping [ip-prefix/mask | ip-address] [detail]
damping [damp-type] [detail]
Context 
show>router>bgp
Description 
This command displays BGP routes with have been dampened due to route flapping. This command can be entered with or without a route parameter.
When the keyword detail is included, more detailed information displays.
When only the command is entered (without any parameters included except detail), then all dampened routes are listed.
When a parameter is specified, then the matching route or routes are listed.
When a decayed, history, or suppressed keyword is specified, only those types of dampened routes are listed.
Parameters 
ip-prefix/mask
Displays damping information for the specified IP prefix and mask length.
ip-address
Displays damping entry for the best match route for the specified IP address.
damp-type
Displays damping type for the specified IP address.
decayed
Displays damping entries that are decayed but are not suppressed.
history
Displays damping entries that are withdrawn but have history.
suppressed
Displays damping entries suppressed because of route damping.
detail
Displays detailed information.
Output 
Show Damping Output Fields
The following table describes BGP damping output fields:
 
Sample Output
*A:ALA-12# show router 3 bgp damping 
==============================================================================
  BGP Router ID : 10.0.0.14         AS : 65206   Local AS : 65206
==============================================================================
  Legend -
  Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
  Origin codes  : i - IGP, e - EGP, ? - incomplete,  - best
==============================================================================
BGP Damped Routes
==============================================================================
Flag  Network            From            Reuse       AS-Path 
------------------------------------------------------------------------------
ud*i  12.149.7.0/24      10.0.28.1       00h00m00s   60203 65001 19855 3356
                                                      1239  22406 
si    24.155.6.0/23      10.0.28.1       00h43m41s   60203 65001 19855 3356
                                                      2914  7459 
si    24.155.8.0/22      10.0.28.1       00h38m31s   60203 65001 19855 3356
                                                      2914  7459 
si    24.155.12.0/22     10.0.28.1       00h35m41s   60203 65001 19855 3356
                                                      2914  7459 
si    24.155.22.0/23     10.0.28.1       00h35m41s   60203 65001 19855 3356
                                                      2914  7459 
si    24.155.24.0/22     10.0.28.1       00h35m41s   60203 65001 19855 3356
                                                      2914  7459 
si    24.155.28.0/22     10.0.28.1       00h34m31s   60203 65001 19855 3356
                                                      2914  7459 
si    24.155.40.0/21     10.0.28.1       00h28m24s   60203 65001 19855 3356
                                                      7911  7459 
si    24.155.48.0/20     10.0.28.1       00h28m24s   60203 65001 19855 3356
                                                      7911  7459 
ud*i  61.8.140.0/24      10.0.28.1       00h00m00s   60203 65001 19855 3356
                                                      4637  17447 
ud*i  61.8.141.0/24      10.0.28.1       00h00m00s   60203 65001 19855 3356
                                                      4637  17447 
ud*i  61.9.0.0/18        10.0.28.1       00h00m00s   60203 65001 19855 3356
                                                      3561  9658  6163 
. . .
ud*i  62.213.184.0/23    10.0.28.1       00h00m00s   60203 65001 19855 3356
                                                      6774  6774  9154 
------------------------------------------------------------------------------
*A:ALA-12#
 
 
*A:ALA-12# show router 3 bgp damping detail 
==============================================================================
  BGP Router ID : 10.0.0.14         AS : 65206   Local AS : 65206
==============================================================================
  Legend -
  Status codes  : u - used, s - suppressed, h - history, d - decayed, * - 
 valid
  Origin codes  : i - IGP, e - EGP, ? - incomplete,  - best
==============================================================================
BGP Damped Routes
==============================================================================
------------------------------------------------------------------------------
Network : 12.149.7.0/24
------------------------------------------------------------------------------
Network          : 12.149.7.0/24        Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h00m00s
Peer AS          : 60203                Peer Router-Id   : 32.32.27.203
Local Pref       : none
Age              : 00h22m09s            Last update      : 02d00h58m
FOM Present      : 738                  FOM Last upd.    : 2039
Number of Flaps  : 2                    Flags            : ud*i
Path             : 60203 65001 19855 3356  1239  22406
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
Network : 15.142.48.0/20
------------------------------------------------------------------------------
Network          : 15.142.48.0/20       Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h00m00s
Peer AS          : 60203                Peer Router-Id   : 32.32.27.203
Local Pref       : none
Age              : 00h00m38s            Last update      : 02d01h20m
FOM Present      : 2011                 FOM Last upd.    : 2023
Number of Flaps  : 2                    Flags            : ud*i
Path             : 60203 65001 19855 3356  3561  5551  1889
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
Network : 15.200.128.0/19
------------------------------------------------------------------------------
Network          : 15.200.128.0/19      Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h00m00s
Peer AS          : 60203                Peer Router-Id   : 32.32.27.203
Local Pref       : none
Age              : 00h00m38s            Last update      : 02d01h20m
FOM Present      : 2011                 FOM Last upd.    : 2023
Number of Flaps  : 2                    Flags            : ud*i
Path             : 60203 65001 19855 1299  702   1889
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
Network : 15.203.192.0/18
-------------------------------------------------------------------------------
Network          : 15.203.192.0/18      Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h00m00s
Peer AS          : 60203                Peer Router-Id   : 32.32.27.203
Local Pref       : none
Age              : 00h00m07s            Last update      : 02d01h20m
FOM Present      : 1018                 FOM Last upd.    : 1024
Number of Flaps  : 1                    Flags            : ud*i
Path             : 60203 65001 19855 1299  702   1889
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
*A:ALA-12#
 
 
*A:ALA-12# show router 3 bgp damping 15.203.192.0/18 detail
==============================================================================
  BGP Router ID : 10.0.0.14         AS : 65206   Local AS : 65206
==============================================================================
  Legend -
  Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
  Origin codes  : i - IGP, e - EGP, ? - incomplete,  - best
==============================================================================
BGP Damped Routes 15.203.192.0/18
==============================================================================
Network : 15.203.192.0/18
------------------------------------------------------------------------------
Network          : 15.203.192.0/18      Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h00m00s
Peer AS          : 60203                Peer Router-Id   : 32.32.27.203
Local Pref       : none
Age              : 00h00m42s            Last update      : 02d01h20m
FOM Present      : 2003                 FOM Last upd.    : 2025
Number of Flaps  : 2                    Flags            : ud*i
Path             : 60203 65001 19855 3356  702   1889
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
Paths : 1
==============================================================================
*A:ALA-12#
*A:ALA-12# show router 3 bgp damping suppressed detail      
==============================================================================
  BGP Router ID : 10.0.0.14         AS : 65206   Local AS : 65206
==============================================================================
  Legend -
  Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
  Origin codes  : i - IGP, e - EGP, ? - incomplete,  - best
==============================================================================
BGP Damped Routes (Suppressed)
==============================================================================
Network : 15.142.48.0/20
------------------------------------------------------------------------------
Network          : 15.142.48.0/20       Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h29m22s
Peer AS          : 60203                Peer Router-Id   : 32.32.27.203
Local Pref       : none
Age              : 00h01m28s            Last update      : 02d01h20m
FOM Present      : 2936                 FOM Last upd.    : 3001
Number of Flaps  : 3                    Flags            : si
Path             : 60203 65001 19855 3356  702   1889
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
Network : 15.200.128.0/19
------------------------------------------------------------------------------
Network          : 15.200.128.0/19      Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h29m22s
Peer AS          : 60203                Peer Router-Id   : 32.32.27.203
Local Pref       : none
Age              : 00h01m28s            Last update      : 02d01h20m
FOM Present      : 2936                 FOM Last upd.    : 3001
Number of Flaps  : 3                    Flags            : si
Path             : 60203 65001 19855 3356  702   1889
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
Network : 15.203.240.0/20
------------------------------------------------------------------------------
Network          : 15.203.240.0/20      Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h29m22s
Peer AS          : 60203                Peer Router-Id   : 32.32.27.203
Local Pref       : none
Age              : 00h01m28s            Last update      : 02d01h20m
FOM Present      : 2936                 FOM Last upd.    : 3001
Number of Flaps  : 3                    Flags            : si
Path             : 60203 65001 19855 3356  702   1889
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
Network : 15.206.0.0/17
------------------------------------------------------------------------------
Network          : 15.206.0.0/17        Peer             : 10.0.28.1
NextHop          : 10.0.28.1            Reuse time       : 00h29m22s
Peer AS          : 60203                Peer Router-Id   : 32.32.27.203
Local Pref       : none
Age              : 00h01m28s            Last update      : 02d01h20m
FOM Present      : 2936                 FOM Last upd.    : 3001
Number of Flaps  : 3                    Flags            : si
Path             : 60203 65001 19855 3356  702   1889
Applied Policy   : default-damping-profile
------------------------------------------------------------------------------
*A:ALA-12#
 
group
Syntax 
group [name] [detail]
Context 
show>router>bgp
Description 
This command displays group information for a BGP peer group. This command can be entered with or without parameters.
When this command is entered without a group name, information about all peer groups displays.
When the command is issued with a specific group name, information only pertaining to that specific peer group displays.
The ‘State’ field displays the BGP group’s operational state. Other valid states are:
Up - BGP global process is configured and running.
Down - BGP global process is administratively shutdown and not running.
Disabled - BGP global process is operationally disabled. The process must be restarted by the operator.
Parameters 
name
Displays information for the BGP group specified.
detail
Displays detailed information.
Output 
Standard and Detailed Group Output
The following table describes the standard and detailed command output fields for a BGP group:
Sample Output
The maximum number of routes BGP can learn from a peer.
*A:ALA-12# show router 3 bgp group
===============================================================================
BGP Groups 
===============================================================================
Group            : To_AS_40000                     
-------------------------------------------------------------------------------
Description      : Not Available
Group Type       : No Type              State            : Up                  
Peer AS          : 40000                Local AS         : 65206               
Local Address    : n/a                  Loop Detect      : Ignore              
Export Policy    : direct2bgp                                                 
Hold Time        : 90                   Keep Alive       : 30                  
Cluster Id       : None                 Client Reflect   : Enabled             
NLRI             : Unicast              Preference       : 170                 
 
List of Peers
- 10.0.0.1       : To_Jukebox
- 10.0.0.12      : Not Available
- 10.0.0.13      : Not Available
- 10.0.0.14      : To_ALA-1
- 10.0.0.15      : To_H-215
Total Peers      : 5                    Established      : 2                   
===============================================================================
*A:ALA-12#
 
 
neighbor
Syntax 
neighbor [ip-address [[family family] filter1]]
neighbor [as-number [[family family] filter2]]
Context 
show>router>bgp
Description 
This command displays BGP neighbor information. This command can be entered with or without any parameters.
When this command is issued without any parameters, information about all BGP peers displays.
When the command is issued with a specific IP address or ASN, information regarding only that specific peer or peers with the same AS display.
When either received-routes or advertised-routes is specified, then the routes received from or sent to the specified peer is listed (see second output example).
Note: This information is not available by SNMP.
When either history or suppressed is specified, then the routes learned from those peers that either have a history or are suppressed (respectively) are listed.
The ‘State’ field displays the BGP peer’s protocol state. In additional to the standard protocol states, this field can also display the ‘Disabled’ operational state which indicates the peer is operationally disabled and must be restarted by the operator.
Parameters 
ip-addr
Displays the BGP neighbor with the specified IP address.
family family
Specifies the type of routing information to be distributed by the BGP instance.
Values
filter1
Specifies route criteria.
Values
filter2
Specifies route criteria.
Values
Output 
Standard and Detailed Neighbor
The following table describes the standard and detailed command output fields for a BGP neighbor:
 
 
The maximum number of routes BGP can learn from a peer.
Sample Output
*A:ALA-12# show router 3 bgp neighbor
===============================================================================
BGP Neighbor
===============================================================================
-------------------------------------------------------------------------------
Peer : 10.0.0.15         Group : To_AS_40000
-------------------------------------------------------------------------------
Peer AS          : 65205                                                        
Peer Address     : 10.0.0.15            Peer Port        : 0                   
Local AS         : 65206                                                        
Local Address    : 10.0.0.16            Local Port       : 0                   
Peer Type        : External                                                     
State            : Active               Last State       : Connect             
Last Event       : openFail                                                     
Last Error       : Hold Timer Expire
Hold Time        : 90                   Keep Alive       : 30                  
Active Hold Time : 0                    Active Keep Alive: 0                   
Cluster Id       : None                                                         
Preference       : 170                  Num of Flaps     : 0                   
Recd. Prefixes   : 0                    Active Prefixes  : 0                   
Recd. Paths      : 0                    Suppressed Paths : 0                   
Input Queue      : 0                    Output Queue     : 0                   
i/p Messages     : 0                    o/p Messages     : 0                   
i/p Octets       : 0                    o/p Octets       : 0                   
i/p Updates      : 0                    o/p Updates      : 0                   
Export Policy    : direct2bgp 
===============================================================================
*A:ALA-12#
 
 
*A:ALA-12# show router 3 bgp neighbor detail
===============================================================================
BGP Neighbor (detail)
===============================================================================
-------------------------------------------------------------------------------
Peer : 10.0.0.15         Group : To_AS_40000
-------------------------------------------------------------------------------
Peer AS          : 65205                                                        
Peer Address     : 10.0.0.15            Peer Port        : 0                   
Local AS         : 65206                                                        
Local Address    : 10.0.0.16            Local Port       : 0                   
Peer Type        : External                                                     
State            : Active               Last State       : Connect             
Last Event       : openFail                                                     
Last Error       : Hold Timer Expire
Connect Retry    : 20                   Local Pref.      : 100                 
Min Route Advt.  : 30                   Min AS Orig.     : 15                  
Multipath        : 1                    Multihop         : 5                   
Damping          : Disabled             Loop Detect      : Ignore              
MED Out          : No MED Out           Authentication   : None                
Next Hop Self    : Disabled             AggregatorID Zero: Disabled            
Remove Private   : Disabled             Passive          : Disabled            
Prefix Limit     : No Limit                                                     
Hold Time        : 90                   Keep Alive       : 30                  
Active Hold Time : 0                    Active Keep Alive: 0                   
Cluster Id       : None                 Client Reflect   : Enabled             
Preference       : 170                  Num of Flaps     : 0                   
Recd. Prefixes   : 0                    Active Prefixes  : 0                   
Recd. Paths      : 0                    Suppressed Paths : 0                   
Input Queue      : 0                    Output Queue     : 0                   
i/p Messages     : 0                    o/p Messages     : 0                   
i/p Octets       : 0                    o/p Octets       : 0                   
i/p Updates      : 0                    o/p Updates      : 0                   
Export Policy    : direct2bgp                                                 
 
===============================================================================
*A:ALA-12#
 
 
Output 
Show Advertised and Received Routes Output
The following table describes the command output fields for both the standard and detailed information for a neighbor:
 
Sample Output
*A:ALA-12# show router 3 bgp neighbor 10.0.0.16 received-routes
==============================================================================
 BGP Router ID : 10.0.0.16         AS : 65206   Local AS : 65206 
===============================================================================
 Legend -
 Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
 Origin codes  : i - IGP, e - EGP, ? - incomplete, > - best
===============================================================================
BGP Neighbor
===============================================================================
Flag  Network            Nexthop         LocalPref  MED        As-Path          
-------------------------------------------------------------------------------
?     10.0.0.16/32       10.0.0.16       100        none       No As-Path      
?     10.0.6.0/24        10.0.0.16       100        none       No As-Path      
?     10.0.8.0/24        10.0.0.16       100        none       No As-Path      
?     10.0.12.0/24       10.0.0.16       100        none       No As-Path      
?     10.0.13.0/24       10.0.0.16       100        none       No As-Path      
?     10.0.204.0/24      10.0.0.16       100        none       No As-Path      
===============================================================================
*A:ALA-12#
paths
Syntax 
paths
Context 
show>router>bgp
Description 
This command displays a summary of BGP path attributes.
Output 
Show Path Output
The following table describes the command output fields for a BGP path.
 
Sample Output
*A:ALA-12# show router 3 bgp paths
==============================================================================
 BGP Router ID : 10.0.0.14         AS : 65206   Local AS : 65206 
==============================================================================
BGP Paths
------------------------------------------------------------------------------
Path: 60203 65001 19855 3356  15412 
------------------------------------------------------------------------------
Origin           : IGP                  Next Hop         : 10.0.28.1           
MED              : 60203                Local Preference : none                
Refs             : 4                    ASes             : 5                   
Segments         : 1                                                           
Flags            : EBGP-learned
Aggregator       : 15412  62.216.140.1
------------------------------------------------------------------------------
Path: 60203 65001 19855 3356  1     1236  1236  1236  1236  
------------------------------------------------------------------------------
Origin           : IGP                  Next Hop         : 10.0.28.1           
MED              : 60203                Local Preference : none                
Refs             : 2                    ASes             : 9                   
Segments         : 1                                                           
Flags            : EBGP-learned
------------------------------------------------------------------------------
*A:ALA-12# 
 
routes
Syntax 
routes [family family] [prefix [detail | longer]]
routes [family family] [prefix [hunt | brief]]
routes [family family] [community comm-id]
routes [family family] [aspath-regex reg-ex1]
routes [family family] [ipv6-prefix[/prefix-length] [detail | longer] | [hunt [brief]]]
Context 
show>router>bgp
Description 
This command displays BGP route information.
When this command is issued without any parameters, then the entire BGP routing table displays.
When this command is issued with an IP prefix/mask or IP address, then the best match for the parameter displays.
Parameters 
family family
Specifies the type of routing information to be distributed by the BGP instance.
Values
ipv4 — Displays only those BGP peers that have the IPv4 family enable and not those capable of exchanging IP-VPN routes.
vpn-ipv4 — Displays the BGP peers that are IP-VPN capable.
ipv6 — Displays the BGP peers that are IPv6 capable.
mcast-ipv4 — Displays the BGP peers that are mcast-ipv4 capable.
prefix
Specifies the type of routing information to display.
Values
rd|[rd:]ip-address[/mask]
rd {ip-address:number1
as-number1:number2
as-number2:number3}
number1 1 — 65535
as-number1 1 — 65535
number2 0 — 4294967295
as-number2 1 — 4294967295
number3 0 — 65535
ip-address a.b.c.d
mask 0 — 32
ipv6-prefix[/prefix-length
Specifies the type of IPv6 routing information to display.
Values
filter
Specifies route criteria.
Values
hunt Displays entries for the specified route in the RIB-In, RIB-Out, and RTM.
longer Displays the specified route and subsets of the route.
detail Display the longer, more detailed version of the output.
aspath-regex “reg-exp
Displays all routes with an AS path matching the specified regular expression reg-exp.
community comm.-id
Displays all routes with the specified BGP community.
Values
[as-number1:comm-val1 | ext-comm | well-known-comm]
ext-comm type:{ip-address:comm-val1 | as-number1:comm-val2 | as-
number2:comm-val1}
as-number1 0..65535
comm-val1 0..65535
type keywords: target, origin
ip-address a.b.c.d
comm-val2 0 — 4294967295
as-number2 0 — 4294967295
well-known-comm no-export, no-export-subconfed, no-advertise
Output 
Show BGP Routes
The following table describes the command output fields for BGP routes.
 
Sample Output
*A:ALA-12>config>router>bgp# show router 3 bgp routes family ipv4
==============================================================================
 BGP Router ID : 10.10.10.103      AS : 200     Local AS : 200
==============================================================================
 Legend -
 Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
 Origin codes  : i - IGP, e - EGP, ? - incomplete, > - best
==============================================================================
BGP Routes
==============================================================================
Flag  Network                             Nexthop         LocalPref  MED
      VPN Label                           As-Path
------------------------------------------------------------------------------
No Matching Entries Found
==============================================================================
*A:ALA-12>config>router>bgp# 
 
A:SR-12# show router bgp routes 100.0.0.0/31 hunt 
===============================================================================
 BGP Router ID : 10.20.1.1	   AS : 100	Local AS : 100	 
===============================================================================
 Legend -
 Status codes  : u - used, s - suppressed, h - history, d - decayed, * - valid
 Origin codes  : i - IGP, e - EGP, ? - incomplete, > - best
===============================================================================
BGP Routes
===============================================================================
RIB In Entries
-------------------------------------------------------------------------------
Network        : 100.0.0.0/31
Nexthop        : 10.20.1.2
Route Dist.    : 10.20.1.2:1		VPN Label	: 131070 
From	       : 10.20.1.2
Res. Nexthop   : 10.10.1.2
Local Pref.    : 100		Interface Name	: to-sr7 
Aggregator AS  : none		Aggregator	: none 
Atomic Aggr.   : Not Atomic		MED	: none
Community      : target:10.20.1.2:1
Cluster        : No Cluster Members
Originator Id  : None		Peer Router Id	: 10.20.1.2
Flags	       : Used  Valid  Best  IGP  
AS-Path        : No As-Path
VPRN Imported  : 1 2 10 12
-------------------------------------------------------------------------------
RIB Out Entries
-------------------------------------------------------------------------------
Routes : 1
===============================================================================
A:SR-12# 
summary
Syntax 
summary [all]
Context 
show>router>bgp
Description 
This command displays a summary of BGP neighbor information.
If confederations are not configured, that portion of the output will not display.
The “State” field displays the global BGP operational state. The valid values are:
Up — BGP global process is configured and running.
Down — BGP global process is administratively shutdown and not running.
Disabled — BGP global process is operationally disabled. The process must be restarted by the operator.
For example, if a BGP peer is operationally disabled, then the state in the summary table shows the state ‘Disabled’
Parameters 
all
Displays BGP peers in all instances.
Output 
Show BGP Summary Output
The following table describes the command output fields for a BGP summary:
 
Sample Output
*A:ALA-12# show router 3 bgp summary
===============================================================================
 BGP Router ID : 10.0.0.14         AS : 65206   Local AS : 65206 
===============================================================================
 BGP Admin State         : Up            BGP Oper State       : Up
 Confederation AS        : 40000
 Member Confederations   : 65205 65206 65207 65208
 
 Number of Peer Groups   : 2             Number of Peers      : 7         
 Total BGP Active Routes : 86689         Total BGP Routes     : 116999    
 Total BGP Paths         : 35860         Total Path Memory    : 2749476   
 Total Supressed Routes  : 0             Total History Routes : 0         
 Total Decayed Routes    : 0         
===============================================================================
BGP Summary
===============================================================================
Neighbor           AS PktRcvd PktSent InQ OutQ   Up/Down State|Recv/Actv/Sent   
-------------------------------------------------------------------------------
10.0.0.1        65206       5   21849   0    0 00h01m29s 32/0/86683            
10.0.0.12       65206       0       0   0    0 00h01m29s Active                
10.0.0.13       65206       5   10545   0   50 00h01m29s 6/0/86683             
10.0.0.15       65205       0       0   0    0 00h01m29s Active                
10.0.0.16       65206       5    9636   0   50 00h01m29s 6/0/86683             
10.0.27.1           2       0       0   0    0 00h01m29s Active                
10.0.28.1       60203   22512      15   0    0 00h01m29s 116955/86689/9        
===============================================================================
*A:ALA-12#
ecmp
Syntax 
ecmp
Context 
show>router
Description 
This command displays the ECMP settings for the router.
Output 
Show ECMP Settings Output
The following table describes the output fields for the router ECMP settings.
Sample Output
*A:ALA-12# show router 3 ecmp
===============================================================================
Router ECMP                                                                    
===============================================================================
Instance       Router Name                      ECMP    Configured-ECMP-Routes 
-------------------------------------------------------------------------------
1              Base                             True    8                      
===============================================================================
*A:ALA-12# 
interface
Syntax 
interface [{[ip-address | ip-int-name] [detail]}] | [summary] | [exclude-services]
Context 
show>router
Description 
This command displays the router IP interface table sorted by interface index.
Parameters 
ip-address
Only displays the interface information associated with the specified IP address.
ip-int-name
Only displays the interface information associated with the specified IP interface name.
detail
Displays detailed IP interface information.
summary
Displays summary IP interface information for the router.
exclude-services
Displays IP interface information, excluding IP interfaces configured for customer services. Only core network IP interfaces are displayed.
Output 
Standard IP Interface Output
The following table describes the standard output fields for an IP interface:
n/a — Indicates no IP address has been assigned to the IP interface.
Sample Output
*A:ALA-12# show router 3 interface
===============================================================================
Interface Table                                                                
===============================================================================
Interface-Name                   Type IP-Address         Adm    Opr  Mode      
-------------------------------------------------------------------------------
system                           Pri  10.10.0.3/32       Up     Up   Network   
to-ser1                          Pri  10.10.13.3/24      Up     Up   Network   
to-ser4                          Pri  10.10.34.3/24      Up     Up   Network   
to-ser5                          Pri  10.10.35.3/24      Up     Up   Network   
to-ser6                          n/a  n/a                Up     Down Network   
to-web                           Pri  10.1.1.3/24        Up     Down Service   
management                       Pri  192.168.2.93/20    Up     Up   Network   
===============================================================================
*A:ALA-12# 
 
 
*A:ALA-12# show router 3 interface 10.10.0.3/32
===============================================================================
Interface Table                                                                
===============================================================================
Interface-Name                   Type IP-Address         Adm    Opr  Mode      
-------------------------------------------------------------------------------
system                           Pri  10.10.0.3/32       Up     Up   Network   
===============================================================================
SR4#
 
 
*A:ALA-12# show router 3 interface to-ser1 
===============================================================================
Interface Table                                                                
===============================================================================
Interface-Name                   Type IP-Address         Adm    Opr  Mode      
-------------------------------------------------------------------------------
to-ser1                          Pri  10.10.13.3/24      Up     Up   Network   
===============================================================================
*A:ALA-12#
 
 
*A:ALA-12# show router 3 interface exclude-services
===============================================================================
Interface Table                                                                
===============================================================================
Interface-Name                   Type IP-Address         Adm    Opr  Mode      
-------------------------------------------------------------------------------
system                           Pri  10.10.0.3/32       Up     Up   Network   
to-ser1                          Pri  10.10.13.3/24      Up     Up   Network   
to-ser4                          Pri  10.10.34.3/24      Up     Up   Network   
to-ser5                          Pri  10.10.35.3/24      Up     Up   Network   
to-ser6                          n/a  n/a                Up     Down Network   
management                       Pri  192.168.2.93/20    Up     Up   Network   
===============================================================================
*A:ALA-12#
 
 
 
Detailed IP Interface Output
The following table describes the detailed output fields for an IP interface.
Not Assigned — Indicates no IP address has been assigned to the IP interface.
The maximum number (Number) of ICMP TTL expired messages the IP interface will issue in a given period of time (Time (seconds)).
*A:ALA-12# show router 3 interface detail
==============================================================================
Interface Table                                                                
==============================================================================
Interface                                                                      
------------------------------------------------------------------------------
If Name      : to-ser1                                                         
Admin State  : Up                               Oper State       : Up          
                                                                               
IP Addr/mask : 10.10.13.3/24                    Address Type     : Primary     
IGP Inhibit  : Disabled                         Broadcast Address: Host-ones   
                                                                               
IP Addr/mask : 10.200.0.1/16                    Address Type     : Secondary   
IGP Inhibit  : Enabled                          Broadcast Address: Host-ones   
------------------------------------------------------------------------------
Details                                                                        
------------------------------------------------------------------------------
If Index     : 2                                                               
Port Id     : 1/1/2                             If Type          : Network     
Egress Filter: none                             Ingress Filter   : 100         
QoS Policy   : 1                                SNTP Broadcast   : False       
MAC Address  : 04:5d:01:01:00:02                Arp Timeout      : 14400       
IP MTU       : 1500                             ICMP Mask Reply  : True        
Cflowd       : none
                                                                               
ICMP Details                                                                   
Redirects    : Disabled                                                        
Unreachables : Number - 100                    Time (seconds)   - 10           
TTL Expired  : Number - 100                    Time (seconds)   - 10           
==============================================================================
*A:ALA-12# 
 
Summary IP Interface Output
The following table describes the summary output fields for the router IP interfaces.
 
Sample Output
*A:ALA-12# show router 3 interface summary
===============================================================================
Router Summary (Interfaces)                                                    
===============================================================================
Instance  Router Name                       Interfaces    Admin-Up   Oper-Up   
-------------------------------------------------------------------------------
1         Base                              7             7          5         
===============================================================================
*A:ALA-12# 
mvpn
Syntax 
mvpn
Context 
show>router router-instance
Description 
This command displays Multicast VPN related information. The router instance must be specified.
Sample Output
*A:Dut-C# show router 1 mvpn
===============================================================================
MVPN 1 configuration data
===============================================================================
signaling          : Bgp                  auto-discovery     : Enabled
UMH Selection      : Highest-Ip           intersite-shared   : Enabled
vrf-import         : N/A
vrf-export         : N/A
vrf-target         : target:1:1
C-Mcast Import RT  : target:10.20.1.3:2
  
ipmsi              : pim-asm 224.1.1.1
admin status       : Up                   three-way-hello    : N/A
hello-interval     : N/A                  hello-multiplier   : 35 * 0.1
tracking support   : Disabled             Improved Assert    : N/A
  
spmsi              : pim-ssm 225.0.0.0/32
join-tlv-packing   : N/A
data-delay-interval: 3 seconds
data-threshold     : 224.0.0.0/4 --> 1 kbps
===============================================================================
database
Syntax 
database [ip-prefix [/mask] [longer] [peer ip-address]
Context 
show>router>rip
Description 
Displays all routes in the RIP database.
Output 
Show RIP Database Output
The following table describes the output fields for the RIP route database.
Sample Output
*A:ALA-1#  show rip database 
==============================================================================
RIP Route Database                                                             
==============================================================================
Destination        Peer             NextHop         Metric  Tag     TTL   Valid
------------------------------------------------------------------------------
180.0.0.10/32      180.1.7.15       0.0.0.0         2       0x0000  163   No   
180.0.0.10/32      180.1.8.14       0.0.0.0         2       0x0000  179   No   
180.0.0.14/32      180.1.8.14       0.0.0.0         1       0x0000  179   Yes  
180.0.6.0/24       180.1.7.15       0.0.0.0         11      0x2002  163   No   
180.0.6.0/24       180.1.8.14       0.0.0.0         11      0x2002  179   No   
180.0.7.0/24       180.1.7.15       0.0.0.0         11      0x2002  163   No   
180.0.7.0/24       180.1.8.14       0.0.0.0         11      0x2002  179   No   
180.1.5.0/24       180.1.7.15       0.0.0.0         2       0x0000  151   Yes  
180.1.5.0/24       180.1.8.14       0.0.0.0         1       0x0000  167   No   
180.100.17.16/31   180.1.7.15       0.0.0.0         2       0x0000  151   No   
180.100.17.16/31   180.1.8.14       0.0.0.0         2       0x0000  167   No   
------------------------------------------------------------------------------
No. of Routes: 11                                                              
==============================================================================
*A:ALA-12#
neighbor
Syntax 
neighbor [ip-address | ip-int-name] [detail] [advertised-routes]
Context 
show>router>rip
Description 
Displays RIP neighbor interface information.
Parameters 
ip-address | ip-int-name
Displays information for the specified IP interface.
Default
advertised-routes
Displays the routes advertised to RIP neighbors. If no neighbors are specified, then all routes advertised to all neighbors are displayed. If a specific neighbor is given then only routes advertised to the given neighbor/interface are displayed.
Default
Output 
Standard Show RIP Neighbor Output
The following table describes the standard command output fields for a RIP group.
 
Specifies that RIPv2 formatted messages are sent to the broadcast address.
Specifies that RIPv2 formatted messages are sent to the multicast address.
Specifies that no RIP messages are sent (i.e., silent listener).
Specifies that RIP updates in version 1 format only will be accepted.
Specifies that RIP updates in version 2 format only will be accepted.
Sample Output
*A:ALA-12#  show router 3 rip neighbor
==============================================================================
RIP Neighbors
==============================================================================
Interface                         Adm  Opr  Primary IP      Send  Recv  Metric  
                                                            Mode  Mode  In      
------------------------------------------------------------------------------
router-21/1                        Up   Up   10.0.3.12       None  Both  1      
router-21/2                        Up   Up   10.0.5.12       BCast Both  1      
router-21/3                        Up   Up   10.0.6.12       BCast Both  1      
router-21/4                        Up   Up   10.0.10.12      BCast Both  1      
router-21/5                        Up   Up   10.0.9.12       BCast Both  1      
router-21/6                        Up   Up   10.0.17.12      None  Both  1      
router-21/7                        Up   Up   10.0.16.12      None  Both  1
==============================================================================
*A:ALA-12#
 
Detailed Show RIP Neighbor Output
The following table describes the standard command output fields for a RIP group.
The RIP neighbor description. No Description Available indicates no description is configured.
Specifies that RIPv2 formatted messages are sent to the broadcast address.
Specifies that RIPv2 formatted messages are sent to the multicast address.
Specifies that no RIP messages are sent (i.e., silent listener).
Specifies that RIP updates in version 1 format only will be accepted.
Specifies that RIP updates in version 2 format only will be accepted.
The import route policy that is used to determine which routes are accepted from RIP neighbors.
Sample Output
*A:ALA-12#  show router 3 rip peers
==============================================================================
RIP Peers
==============================================================================
Peer IP Addr      Interface Name                     Version     Last Update    
------------------------------------------------------------------------------
10.0.5.13         router-2/2                         RIPv2       0             
10.0.6.16         router-2/3                         RIPv2       2             
10.0.9.14         router-2/5                         RIPv2       8             
10.0.10.15        router-2/4                         RIPv2       0             
------------------------------------------------------------------------------
No. of Peers: 4
==============================================================================
*A:ALA-12#
 
 
*A:ALA-12# show router 3 rip neighbor detail
==============================================================================
RIP Neighbors (Detail)
==============================================================================
Neighbor "router-2/7"
------------------------------------------------------------------------------
Description    : No Description Available
Primary IP     : 10.0.16.12         Group        : seven                       
Admin State    : Up                 Oper State   : Up                          
Send Mode      : None               Receive Mode : Both                        
Metric In      : 1                  Metric Out   : 1                           
Split Horizon  : Enabled            Check Zero   : Disabled                    
Message Size   : 25                 Preference   : 100                         
Auth. Type     : None               Update Timer : 3                           
Timeout Timer  : 6                  Flush Timer  : 6                           
Export Policies:                                                                
    Rip2Rip
    direct2Rip
    bgp2Rip
Import Policies:                                                                
    None
==============================================================================
*A:ALA-12#
Sample Output
*A:ALA-12# show router 3 rip neighbors interface advertised-routes 
==============================================================================
RIP Advertised Routes                                                          
==============================================================================
Destination         Interface         NextHop           Metric  Tag       TTL  
------------------------------------------------------------------------------
180.0.0.2/32        180.1.8.12        0.0.0.0           10      0x2002    n/a  
180.0.0.5/32        180.1.8.12        0.0.0.0           10      0x2002    n/a  
180.0.0.8/32        180.1.8.12        0.0.0.0           10      0x2002    n/a  
180.0.0.9/32        180.1.8.12        0.0.0.0           10      0x2002    n/a  
180.0.0.10/32       180.1.8.12        0.0.0.0           10      0x2002    n/a  
180.0.0.12/32       180.1.8.12        0.0.0.0           1       0x0000    n/a  
180.0.0.13/32       180.1.8.12        0.0.0.0           10      0x2002    n/a  
180.0.0.14/32       180.1.8.12        0.0.0.0           16      0x0000    n/a  
180.0.0.15/32       180.1.8.12        0.0.0.0           2       0x0000    n/a  
180.0.0.16/32       180.1.8.12        0.0.0.0           3       0x0000    n/a  
------------------------------------------------------------------------------
No. of Advertised Routes: 10
==============================================================================
*A:ALA-12#
 
peer
Syntax 
peer [ip-int-name]
Context 
show>router>rip
Description 
Displays RIP peer information.
Parameters 
ip-int-name
Dispays peer information for peers on the specified IP interface.
Default
Output 
Show RIP Peer Output
The following table describes the command output fields for a RIP peer:
 
statistics
Syntax 
statistics [ip-addr | ip-int-name]
Context 
show>router>rip
Description 
Display Interface level statistics for the RIP protocol.
If no IP address or interface name is specified, then all configured RIP interfaces are displayed.
If an IP address or interface name is specified, then only data regarding the specified RIP interface is displayed.
Parameters 
ip-addr | ip-int-name
Displays statistics for the specified IP interface.
Output 
Show RIP Statistics Output
The following table describes the output fields for RIP statistics.
Sample Output
*A:ALA-12# show router 3 rip statistics 
===============================================================================
RIP Statistics                                                                 
===============================================================================
Learned Routes     : 0                  Timed Out Routes   : 0                 
Current Memory     : 120624             Maximum Memory     : 262144            
                                                                               
-------------------------------------------------------------------------------
Interface "to-web"                                                             
-------------------------------------------------------------------------------
Primary IP         : 10.1.1.3           Update Timer       : 30                
Timeout Timer      : 180                Flush Timer        : 120 
Counter                       Total           Last 5 Min      Last 1 Min       
------------------------------------------------------------------------------
Updates Sent                  0               0               0                
Triggered Updates             0               0               0                
Bad Packets Received          0               0               0                
RIPv1 Updates Received        0               0               0                
RIPv1 Updates Ignored         0               0               0                
RIPv1 Bad Routes              0               0               0                
RIPv1 Requests Received       0               0               0                
RIPv1 Requests Ignored        0               0               0                
RIPv2 Updates Received        0               0               0                
RIPv2 Updates Ignored         0               0               0                
RIPv2 Bad Routes              0               0               0                
RIPv2 Requests Received       0               0               0                
RIPv2 Requests Ignored        0               0               0                
Authentication Errors         0               0               0 
==============================================================================
*A:ALA-12#
 
route-table
Syntax 
route-table [ip-prefix [/mask] [longer] | [protocol protocol] | [summary]]
Context 
show>router
Description 
This command displays the active routes in the routing table.
If no command line arguments are specified, all routes are displayed, sorted by prefix.
Parameters 
ip-prefix[/mask]
Displays routes only matching the specified ip-prefix and optional mask.
longer
Displays routes matching the ip-prefix/mask and routes with longer masks.
protocol protocol
Displays routes learned from the specified protocol.
Values
summary
Displays a route table summary information.
Output 
Standard Show Route Table Output
The following table describes the standard output fields for the route table.
Sample Output
*A:ALA-12# show router 3 route-table
==============================================================================
Route Table                                                                    
==============================================================================
Dest Address       Next Hop        Type    Protocol    Age       Metric  Pref  
------------------------------------------------------------------------------
10.10.0.1/32       10.10.13.1      Remote  OSPF        65844     1001    10    
10.10.0.2/32       10.10.13.1      Remote  OSPF        65844     2001    10    
10.10.0.3/32       0.0.0.0         Local   Local       1329261   0       0     
10.10.0.4/32       10.10.34.4      Remote  OSPF        3523      1001    10    
10.10.0.5/32       10.10.35.5      Remote  OSPF        1084022   1001    10    
10.10.12.0/24      10.10.13.1      Remote  OSPF        65844     2000    10    
10.10.13.0/24      0.0.0.0         Local   Local       65859     0       0     
10.10.15.0/24      10.10.13.1      Remote  OSPF        58836     2000    10    
10.10.24.0/24      10.10.34.4      Remote  OSPF        3523      2000    10    
10.10.25.0/24      10.10.35.5      Remote  OSPF        399059    2000    10    
10.10.34.0/24      0.0.0.0         Local   Local       3543      0       0     
10.10.35.0/24      0.0.0.0         Local   Local       1329259   0       0     
10.10.45.0/24      10.10.34.4      Remote  OSPF        3523      2000    10    
10.200.0.0/16      0.0.0.0         Local   Local       4513      0       0     
192.168.0.0/20     0.0.0.0         Local   Local       1329264   0       0     
192.168.254.0/24   0.0.0.0         Remote  Static      11        1       5     
------------------------------------------------------------------------------
*A:ALA-12# 
 
 
*A:ALA-12# show router 3 route-table 10.10.0.4
===============================================================================
Route Table                                                                    
==============================================================================
Dest Address       Next Hop        Type    Protocol    Age       Metric  Pref  
------------------------------------------------------------------------------
10.10.0.4/32       10.10.34.4      Remote  OSPF        3523      1001    10    
------------------------------------------------------------------------------
*A:ALA-12# 
 
 
*A:ALA-12# show router 3 route-table 10.10.0.4/32 longer
==============================================================================
Route Table                                                                    
==============================================================================
Dest Address       Next Hop        Type    Protocol    Age       Metric  Pref  
------------------------------------------------------------------------------
10.10.0.4/32       10.10.34.4      Remote  OSPF        3523      1001    10    
------------------------------------------------------------------------------
No. of Routes: 1
==============================================================================
+ : indicates that the route matches on a longer prefix
*A:ALA-12# 
 
 
*A:ALA-12# show router 3 route-table protocol ospf
==============================================================================
Route Table                                                                    
==============================================================================
Dest Address       Next Hop        Type    Protocol    Age       Metric  Pref  
------------------------------------------------------------------------------
10.10.0.1/32       10.10.13.1      Remote  OSPF        65844     1001    10    
10.10.0.2/32       10.10.13.1      Remote  OSPF        65844     2001    10    
10.10.0.4/32       10.10.34.4      Remote  OSPF        3523      1001    10    
10.10.0.5/32       10.10.35.5      Remote  OSPF        1084022   1001    10    
10.10.12.0/24      10.10.13.1      Remote  OSPF        65844     2000    10    
10.10.15.0/24      10.10.13.1      Remote  OSPF        58836     2000    10    
10.10.24.0/24      10.10.34.4      Remote  OSPF        3523      2000    10    
10.10.25.0/24      10.10.35.5      Remote  OSPF        399059    2000    10    
10.10.45.0/24      10.10.34.4      Remote  OSPF        3523      2000    10    
-------------------------------------------------------------------------------
*A:ALA-12# 
 
 
*A:ALA-12# show router 3 route-table summary
===============================================================================
Route Table Summary                                                            
===============================================================================
                              Active                   Available               
-------------------------------------------------------------------------------
Static                        1                        1                       
Direct                        6                        6                       
BGP                           0                        0                       
OSPF                          9                        9                       
ISIS                          0                        0                       
RIP                           0                        0                       
Aggregate                     0                        0                       
-------------------------------------------------------------------------------
Total                         15                       15                      
===============================================================================
*A:ALA-12# 
service-prefix
Syntax 
service-prefix
Context 
show>router
Description 
This command displays service-prefix information.
Output 
Show Service Prefix Output
The following table describes the service prefix output fields.
Sample Output
*A:ALA-12# show router 3 service-prefix
===============================================================================
Address Ranges Reserved for Services (Service: 3)
===============================================================================
IP Prefix                Mask           Exclusive
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
*A:ALA-12>show>router#
 
static-arp
Syntax 
static-arp [ip-address | ip-int-name | mac ieee-mac-addr]
Context 
show>router
Description 
This command displays the router static ARP table sorted by IP address.
If no options are present, all ARP entries are displayed.
Parameters 
ip-address
Only displays static ARP entries associated with the specified IP address.
ip-int-name
Only displays static ARP entries associated with the specified IP interface name.
mac ieee-mac-addr
Only displays static ARP entries associated with the specified MAC address.
Output 
Static ARP Table Output
The following table describes the output fields for the ARP table.
Sample Output
*A:ALA-12# show router 3 static-arp
==============================================================================
ARP Table                                                                      
==============================================================================
IP Address      MAC Address       Age      Type Interface                      
------------------------------------------------------------------------------
10.200.0.253    00:00:5a:40:00:01 00:00:00 Sta  to-ser1                        
12.200.1.1      00:00:5a:01:00:33 00:00:00 Inv  to-ser1a
------------------------------------------------------------------------------
No. of ARP Entries: 2
==============================================================================
*A:ALA-12#
 
 
*A:ALA-12# show router 3 static-arp 12.200.1.1
==============================================================================
ARP Table                                                                      
==============================================================================
IP Address    MAC Address        Age     Type Interface 
------------------------------------------------------------------------------                   
12.200.1.1      00:00:5a:01:00:33  00:00:00 Inv   to-ser1  a                                                    
===============================================================================
*A:ALA-12#
 
*A:ALA-12# show router 3 static-arp to-ser1
==============================================================================
ARP Table                                                                      
==============================================================================
IP Address    MAC Address       Age      Type Interface                      
------------------------------------------------------------------------------
10.200.0.253  00:00:5a:40:00:01 00:00:00 Sta  to-ser1
===============================================================================
S*A:ALA-12# 
 
*A:ALA-12# show router 3 static-arp mac 00:00:5a:40:00:01
==============================================================================
ARP Table                                                                      
==============================================================================
IP Address    MAC Address       Age      Type Interface 
-------------------------------------------------------------------------------10.200.0.253  00:00:5a:40:00:01 00:00:00 Sta  to-ser1
==============================================================================
*A:ALA-12# 
static-route
Syntax 
static-route [ip-prefix /mask] | [preference preference] | [next-hop ip-addr] [detail]
Context 
show>router
Description 
This command displays the static entries in the routing table.
If no options are present. all static routes are displayed sorted by prefix.
Parameters 
ip-prefix /mask
Displays static routes only matching the specified ip-prefix and mask.
preference preference
Only displays static routes with the specified route preference.
Values
next-hop ip-addr
Only displays static routes with the specified next hop IP address.
detail
Displays detailed information about the static route.
Output 
Show Static Route Output
The following table describes the output fields for the static route table:
 
The static route is a black hole route. The Nexthop for this type of route is black-hole.
The static route is an indirect route, where the nexthop for this type of route is the non-directly connected next hop.
The route is a static route with a directly connected next hop. The Nexthop for this type of route is either the next hop IP address or an egress IP interface name.
Sample Output
*A:ALA-12# show router 3 static-route
==============================================================================
Route Table                                                                     
==============================================================================
IP Addr/mask       Pref Metric Type Nexthop              Interface       Active 
------------------------------------------------------------------------------
192.168.250.0/24   5    1      ID   10.200.10.1          to-ser1         Y 
192.168.252.0/24   5    1      NH   10.10.0.254          n/a             N 
192.168.253.0/24   5    1      NH   to-ser1              n/a             N 
192.168.253.0/24   5    1      NH   10.10.0.254          n/a             N 
192.168.254.0/24   4    1      BH   black-hole           n/a             Y
==============================================================================
*A:ALA-12# 
 
 
*A:ALA-12# show router 3 static-route 192.168.250.0/24
==============================================================================
Route Table                                                                     
==============================================================================
IP Addr/mask       Pref Metric Type Nexthop              Interface       Active 
------------------------------------------------------------------------------
192.168.250.0/24   5    1      ID   10.200.10.1          to-ser1         Y
==============================================================================
*A:ALA-12# 
 
 
*A:ALA-12# show router 3 static-route preference 4
============================================================================= 
Route Table                                                                     
==============================================================================
IP Addr/mask       Pref Metric Type Nexthop              Interface       Active 
------------------------------------------------------------------------------
192.168.254.0/24   4    1      BH   black-hole           n/a             Y
==============================================================================
*A:ALA-12# 
 
 
*A:ALA-12# show router 3 static-route next-hop 10.10.0.254
==============================================================================
Route Table                                                                     
==============================================================================
IP Addr/mask       Pref Metric Type Nexthop              Interface       Active 
------------------------------------------------------------------------------
192.168.253.0/24   5    1      NH   10.10.0.254          n/a             N
============================================================================= 
*A:ALA-12# 
 
*A:Dut-B# show router static-route
 
===============================================================================
Static Route Table (Router: Base)  Family: IPv4
===============================================================================
Prefix                                        Tag         Met    Pref Type Act
   Next Hop                                    Interface
-------------------------------------------------------------------------------
1.2.3.4/32                                    0           1      5    NH   Y
   10.11.25.6
ip-10.11.25.5_base_to_cpe_static
10.11.15.0/24                                 0           1      5    NH   Y
   10.11.25.6
ip-10.11.25.5_base_to_cpe_static
-------------------------------------------------------------------------------
No. of Static Routes: 2
===============================================================================
 
 
*A:Dut-B# show router static-route detail
==============================================================================
Static Route Table (Router: Base)  Family: IPv4
==============================================================================
Network          : 1.2.3.4/32
Nexthop          : 10.11.25.6
Type             : Nexthop                         Nexthop Type      : IP
Interface        : ip-10.11.25.5_base_to_cpe_stat* Active            : Y
Metric           : 1                               Preference        : 5
Admin  State     : Up                              Tag               : 0
BFD              : disabled
CPE-check        : enabled                         State             : n/a
Target           : 10.11.18.6
Interval         : 1                               Drop Count        : 3
Log              : N
CPE Host Up Time : 0d 00:00:02
CPE Echo Req Tx  : 3                               CPE Echo Reply Rx : 3
CPE Up Trans     : 1                               CPE Down Trans    : 0
CPE TTL          : 2
------------------------------------------------------------------------------
Network          : 10.11.15.0/24
Nexthop          : 10.11.25.6
Type             : Nexthop                         Nexthop Type      : IP
Interface        : ip-10.11.25.5_base_to_cpe_stat* Active            : Y
Metric           : 1                               Preference        : 5
Admin  State     : Up                              Tag               : 0
BFD              : disabled
CPE-check        : disabled
------------------------------------------------------------------------------
No. of Static Routes: 2
 
==============================================================================
 
*A:CPM133>config>router# show router static-route 3.3.3.3/32 detail
 
===============================================================================
Static Route Table (Router: Base)  Family: IPv4
===============================================================================
Prefix           : 3.3.3.3/32
Nexthop          : n/a
Type             : Blackhole                       Nexthop Type      : IP
Interface        : n/a                             Active            : Y
Prefix List      : n/a                             Prefix List Type  : n/a
Metric           : 1                               Preference        : 5
Admin  State     : Up                              Tag               : 0
BFD              : disabled                        Community         : 100:33
CPE-check        : disabled
-------------------------------------------------------------------------------
No. of Static Routes: 1
 
===============================================================================
 
tunnel-table
Syntax 
tunnel-table [ip-address[/mask] [protocol protocol | sdp sdp-id]
tunnel-table [summary]
Context 
show>router
Description 
This command displays tunnel table information.
Note that auto-bind GRE tunnels are not displayed in show command output. GRE tunnels are not the same as SDP tunnels that use the GRE encapsulation type. When the auto-bind command is used when configuring a VPRN service, it means the MP-BGP NH resolution is referring to core routing instance for IP reachability. For a VPRN service this object specifies the lookup to be used by the routing instance if no SDP to the destination exists.
Parameters 
ip-address[/mask]
Displays the specified tunnel table’s destination IP address and mask.
protocol protocol
Displays LDP protocol information.
sdp sdp-id
Displays information pertaining to the specified SDP.
summary
Displays summary tunnel table information.
Output 
Show Tunnel Table Output
The following table describes tunnel table output fields:
Specifies the route preference for routes learned from the configured peer(s).
Sample Output
*A:ALA-12>config>service# show router 3 tunnel-table
==============================================================================
Tunnel Table
==============================================================================
Destination     Owner   Encap   Tunnel  Id      Pref            Nexthop	Metric 
------------------------------------------------------------------------------- 
10.0.0.1/32     sdp     GRE     10      5       10.0.0.1        0 
10.0.0.1/32     sdp     GRE     21      5       10.0.0.1        0 
10.0.0.1/32     sdp     GRE     31      5       10.0.0.1        0 
10.0.0.1/32     sdp     GRE     41      5       10.0.0.1        0
==============================================================================
*A:ALA-12>config>service# 
 
 
*A:ALA-12>config>service#  show router 3 tunnel-table summary
=============================================================================
Tunnel Table Summary (Router: Base)
=============================================================================
                              Active                   Available
------------------------------------------------------------------------------
LDP                           1                        1
SDP                           1                        1
==============================================================================
*A:ALA-12>config>service# 
statistics
Syntax 
statistics [ip-int-name | ip-address]
Context 
show>router>dhcp
Description 
Display statistics for DHCP Relay and DHCP snooping.
If no IP address or interface name is specified, then all configured interfaces are displayed.
If an IP address or interface name is specified, then only data regarding the specified interface is displayed.
Parameters 
ip-int-name | ip-address
Displays statistics for the specified IP interface.
Output 
Show DHCP Statistics Output
The following table describes the output fields for DHCP. statistics.
Sample Output
*A:ALA-1# show router dhcp statistics
================================================================
DHCP Global Statistics
================================================================
Rx Packets                        : 0
Tx Packets                        : 0
Rx Malformed Packets              : 0
Rx Untrusted Packets              : 0
Client Packets Discarded          : 0
Client Packets Relayed            : 0
Client Packets Snooped            : 0
Server Packets Discarded          : 0
Server Packets Relayed            : 0
Server Packets Snooped            : 0
================================================================
*A:ALA-1#
summary
Syntax 
summary
Context 
show>router>dhcp
Description 
Display the status of the DHCP Relay and DHCP snooping functions on each interface.
Output 
Show DHCP Summary Output
The following table describes the output fields for DHCP summary.
Sample Output
A:ALA-48# show router dhcp summary
===================================================================
Interface Name                   Arp      Used/     Info    Admin             
                                 Populate Provided  Option  State
-------------------------------------------------------------------
ies-10-10.10.1.1                 Yes      1000/8000 Keep    Up    
ies-100-100.100.1.1              No       0/0       Keep    Down  
ies-11-11.11.1.1                 Yes      1000/8000 Keep    Up    
ies-12-12.12.1.1                 Yes      1000/8000 Keep    Up    
ies-13-13.13.1.1                 Yes      1000/8000 Keep    Up    
ies-14-14.14.1.1                 Yes      1000/8000 Keep    Up    
ies-15-15.15.1.1                 Yes      1000/8000 Keep    Up    
ies-16-16.16.1.1                 No       0/0       Keep    Down  
ies-2-10.17.1.1                  No       0/0       Keep    Down  
ies-8-8.8.1.1                    Yes      1000/8000 Keep    Up    
ies-9-9.9.1.1                    Yes      1000/8000 Keep    Up 
-------------------------------------------------------------------
Interfaces: 11
===================================================================
wpp
Syntax 
wpp
wpp [portal wpp-portal-name] [host ip-address] hosts
wpp portal wpp-portal-name
wpp statistics
Context 
show>router
Description 
This command displays Web Portal Protocol information.
 
 
VPRN Clear Commands
apr
Syntax 
arp
Context 
clear>service>id
Description 
This command clears
arp-host
Syntax 
arp-host
arp-host { mac ieee-address | sap sap-id | ip-address ip-address[/mask] }
arp-host [port port-id] [inter-dest-id intermediate-destination-id | no-inter-dest-id]
arp-host statistics [sap sap-id | interface interface-name]
Context 
clear>service>id
Description 
This command clears ARP host data.
dhcp
Syntax 
dhcp
Context 
clear>router
Description 
This command enables the context to clear and reset DHCP entities.
statistics
Syntax 
statistics [interface ip-int-name | ip-address]
Context 
clear>router>dhcp
Description 
Clears DHCP statistics.
forwarding-table
Syntax 
forwarding-table [slot-number]
Context 
clear>router
Description 
This command clears the route table on the specified IOM with the route table.
If the slot number is not specified, the command forces the route table to be recalculated.
Parameters 
slot-number
Clears the specified IOM slot.
Default
Values
interface
Syntax 
interface [ip-int-name | ip-addr] [icmp]
Context 
clear>router
Description 
This command clears IP interface statistics.
If no IP interface is specified either by IP interface name or IP address, the command will perform the clear operation on all IP interfaces.
Parameters 
ip-int-name | ip-addr
The IP interface name or IP interface address.
Default
icmp
Specifies to reset the ICMP statistics for the IP interface(s) used for ICMP rate limit.
damping
Syntax 
damping [[ip-prefix/mask] [neighbor ip-address]] | [group name]
Context 
clear>router>bgp
Description 
This command clears or resets the route damping information for received routes.
Parameters 
ip-prefix/mask
Clears damping information for entries that match the IP prefix and mask length.
neighbor ip-address
Clears damping information for entries received from the BGP neighbor.
group name
Clears damping information for entries received from any BGP neighbors in the peer group.
flap-statistics
Syntax 
flap-statistics [[ip-prefix/mask] [neighbor ip-addr]] | [group group-name] | [regex reg-exp] | [policy policy-name]
Context 
clear>router>bgp
Description 
This command clears route flap statistics.
Parameters 
ip-prefix/mask
Clears route flap statistics for entries that match the specified IP prefix and mask length.
neighbor ip-addr
Clears route flap statistics for entries received from the specified BGP neighbor.
group group-name
Clears route flap statistics for entries received from any BGP neighbors in the specified peer group.
regex reg-exp
Clears route flap statistics for all entries which have the regular expression and the AS path that matches the regular expression.
policy policy-name
Clears route flap statistics for entries that match the specified route policy.
neighbor
Syntax 
neighbor {ip-addr | as as-number | external | all} [soft | soft-inbound | statistics]
Context 
clear>router>bgp
Description 
This command resets the specified BGP peer or peers. This can cause existing BGP connections to be shutdown and restarted.
Parameters 
ip-addr
Resets the BGP neighbor with the specified IP address.
as as-number
Resets all BGP neighbors with the specified peer AS.
external
Resets all EBGP neighbors.
all
Resets all BGP neighbors.
soft
The specified BGP neighbor(s) re-evaluates all routes in the Local-RIB against the configured export policies.
soft-inbound
The specified BGP neighbor(s) re-evaluates all routes in the RIB-In against the configured import policies.
statistics
The BGP neighbor statistics.
protocol
Syntax 
protocol
Context 
clear>router>bgp
Description 
This command resets the entire BGP protocol. If the AS number was previously changed, the BGP AS number does not inherit the new value.
database
Syntax 
database
Context 
clear>router>rip
Description 
This command flushes all routes in the RIP database.
statistics
Syntax 
statistics [neighbor {ip-address | ip-int-name}]
Context 
clear>router>rip
Description 
This command clears statistics for RIP neighbors.
Parameters 
neighbor {ip-address | ip-int-name}
Clears the statistics for the specified RIP interface.
Default
id
Syntax 
id service-id
Context 
clear>service
clear>service>statistics
Description 
This command clears commands for a specific service.
Parameters 
service-id
The ID that uniquely identifies a service.
Values
sap
Syntax 
sap sap-id {all | counters | stp}
Context 
clear>service>statistics
Description 
Clears SAP statistics for a SAP.
Parameters 
sap-id
Specifies the physical port identifier portion of the SAP definition. See Common CLI Command Descriptions for command syntax.
dhcp
Syntax 
dhcp
Context 
clear>router>dhcp
Description 
This command enables the context to clear DHCP parameters.
lease-state
Syntax 
lease-state
lease-state ip-address ip-address
lease-state mac ieee-address
lease-state sap sap-id
lease-state sdp sdp-id:vc-id
Context 
clear>service>id>dhcp
Description 
Clears DHCP lease state information for this service.
Parameters 
ip-address
The IP address of the IP interface. The ip-address portion of the address command specifies the IP host address that will be used by the IP interface within the subnet. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
ieee-address
Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
sap-id
Specifies the physical port identifier portion of the SAP definition. See Common CLI Command Descriptions for command syntax.
sdp-id
The SDP ID to be cleared.
Values
vc-id
The virtual circuit ID on the SDP ID to be cleared.
Values
site
Syntax 
site service-id
Context 
clear>service>id
Description 
This command clears site-specific information for the service.
Parameters 
service-id
Specifies the service ID or service name up to 64 characters in length.
Values
spoke-sdp
Syntax 
spoke-sdp sdp-id:vc-id ingress-vc-label
Context 
clear>service>id
Description 
This command clears and resets the spoke SDP bindings for the service.
Parameters 
sdp-id
The spoke SDP ID to be reset.
Values
vc-id
The virtual circuit ID on the SDP ID to be reset.
Values
sdp
Syntax 
sdp sdp-id keep-alive
Context 
clear>service>statistics
Description 
This command clears keepalive statistics associated with the SDP ID.
Parameters 
sdp-id
The SDP ID for which to clear keepalive statistics.
Values
counters
Syntax 
counters
Context 
clear>service>statistics>id
Description 
Clears all traffic queue counters associated with the service ID.
spoke-sdp
Syntax 
spoke-sdp sdp-id[:vc-id] {all | counters | stp}
Context 
clear>service>statistics>id
Description 
This command clears statistics for the spoke SDP bound to the service.
Parameters 
sdp-id
The spoke SDP ID for which to clear statistics.
Values
vc-id
The virtual circuit ID on the SDP ID to be reset.
Values
all
Clears all queue statistics and STP statistics associated with the SDP.
counters
Clears all queue statistics associated with the SDP.
stp
Clears all STP statistics associated with the SDP.
stp
Syntax 
stp
Context 
clear>service>statistics>id
Description 
Clears all spanning tree statistics for the service ID.
 
VPRN Debug Commands
id
Syntax 
[no] id service-id
Context 
debug>service
Description 
This command debugs commands for a specific service.
The no form of the command disables debugging.
Parameters 
service-id
The ID that uniquely identifies a service.
arp-host
Syntax 
[no] arp-host
Context 
debug>service>id
Description 
This command enables and configures ARP host debugging.
The no form of the command disables ARP host debugging.
dhcp
Syntax 
[no] dhcp
Context 
debug>service>id
Description 
This command enables the context for DHCP debugging.
The no form of the command disables DHCP debugging.
detail-level
Syntax 
detail-level {low | medium | high}
no detail-level
Context 
debug>service>id>dhcp
Description 
This command configures the DHCP tracing detail level.
The no form of the command disables debugging.
mode
Syntax 
mode {dropped-only | ingr-and-dropped | egr-ingr-and-dropped}
no mode
Context 
debug>service>id>dhcp
Description 
This command configures the DHCP tracing mode.
The no form of the command disables debugging.
host-connectivity-verify
Syntax 
[no] host-connectivity-verify
Context 
debug>service>id
Description 
This command enables Subscriber Host Connectivity Verification (SHCV) debugging.
The no form of the command disables the SHCV debugging.
ip
Syntax 
[no] ip ip-address
Context 
debug>service>id>host-connectivity-verify
Description 
This command displays Subscriber Host Connectivity Verification (SHCV) events for a particular IP address.
Parameters 
ip-address
The IP address of the IP interface. The ip-address portion of the address command specifies the IP host address that will be used by the IP interface within the subnet. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
mac
Syntax 
[no] mac ieee-address
Context 
debug>service>id>host-connectivity-verify
Description 
This command displays Subscriber Host Connectivity Verification (SHCV) events for a particular MAC address.
Parameters 
mac-address
Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
 
sap
Syntax 
[no] sap sap-id
Context 
debug>service>id>host-connectivity-verify
Description 
This command displays Subscriber Host Connectivity Verification (SHCV) events for a particular SAP.
Parameters 
sap-id
Specifies the physical port identifier portion of the SAP definition. See Common CLI Command Descriptions for command syntax.
sap
Syntax 
[no] sap sap-id
Context 
debug>service>id
debug>service>id>dhcp
debug>service>stp
Description 
This command enables STP debugging for a specific SAP.
The no form of the command disables debugging.
Parameters 
sap-id
Specifies the physical port identifier portion of the SAP definition. See Common CLI Command Descriptions for command syntax.
sdp
Syntax 
[no] sdp sdp-id:vc-id
Context 
debug>service>id
debug>service>id>dhcp
debug>service>stp
Description 
This command enables STP debugging for a specific SDP.
The no form of the command disables debugging.
event-type
Syntax 
[no] event-type {config-change | svc-oper-status-change | sap-oper-status-change | sdpbind-oper-status-change}
Context 
debug>service>id
Description 
This command enables debugging for a particular event type.
The no form of the command disables debugging.
event-type
Syntax 
[no] event-type {config-change | oper-status-change}
Context 
debug>service>id>sap
Description 
This command enables debugging for a particular event type.
The no form of the command disables debugging.
stp
Syntax 
[no] stp
Context 
debug>service>id
Description 
This command enables the context for debugging STP.
The no form of the command disables debugging.
all-events
Syntax 
all-events
Context 
debug>service>id>event-type
Description 
This command enables STP debugging for all events.
The
no form of the command disables debugging.
bpdu
Syntax 
[no] bpdu
Context 
debug>service>stp
Description 
This command enables STP debugging for received and transmitted BPDUs.
The no form of the command disables debugging.
core-connectivity
Syntax 
[no] core-connectivity
Context 
debug>service>stp
Description 
This command enables STP debugging for core connectivity.
The no form of the command disables debugging.
exception
Syntax 
[no] exception
Context 
debug>service>stp
Description 
This command enables STP debugging for exceptions.
The no form of the command disables debugging.
fsm-state-changes
Syntax 
[no] fsm-state-changes
Context 
debug>service>stp
Description 
This command enables STP debugging for FSM state changes.
The no form of the command disables debugging.
fsm-timers
Syntax 
[no] fsm-timers
Context 
debug>service>stp
Description 
This command enables STP debugging for FSM timer changes.
The no form of the command disables debugging.
port-role
Syntax 
[no] port-role
Context 
debug>service>stp
Description 
This command enables STP debugging for changes in port roles.
The no form of the command disables debugging.
port-state
Syntax 
[no] port-state
Context 
debug>service>stp
Description 
This command enables STP debugging for port states.
The no form of the command disables debugging.
igmp
Syntax 
[no] igmp
Context 
debug>router
Description 
This command enables debugging for IGMP.
The no form of the command disables debugging.
interface
Syntax 
[no] interface [ip-int-name | ip-address]
Context 
debug>router>igmp
Description 
This command enables debugging on the IGMP interface.
The no form of the command disables debugging.
Parameters 
ip-int-name
Only displays the information associated with the specified IP interface name.
ip-address
Only displays the information associated with the specified IP address.
Sample Output
A:FA# debug router 100 igmp interface 
A:FA# 
A:FA# show debug 
debug
    router "100"
        igmp
            interface
        exit
    exit
exit
*A:FA# 
38397 2007/02/01 11:46:40.94 UTC MINOR: DEBUG #2001 vprn100 IGMP[85]
"IGMP[85]: INTF
Querier Timer expired on i/f 2"
 
38398 2007/02/01 11:46:40.94 UTC MINOR: DEBUG #2001 vprn100 IGMP[85]
"IGMP[85]: INTF
Sending query on i/f 2 to 0.0.0.0"
 
38399 2007/02/01 11:46:40.94 UTC MINOR: DEBUG #2001 vprn100 IGMP[85]
"IGMP[85]: INTF
Interface 2 already UP, ignoring event"
 
38400 2007/02/01 11:46:41.64 UTC MINOR: DEBUG #2001 vprn100 IGMP[85]
"IGMP[85]: INTF
Process received group rec MODE_IS_EXCL for i/f 2 group 225.1.1.1 in mode EXCLUD
E. Num srcs 0"
 
38401 2007/02/01 11:46:41.64 UTC MINOR: DEBUG #2001 vprn100 IGMP[85]
"IGMP[85]: INTF
Process received group rec MODE_IS_EXCL for i/f 2 group 225.1.1.2 in mode EXCLUD
E. Num srcs 0"
 
38402 2007/02/01 11:46:41.64 UTC MINOR: DEBUG #2001 vprn100 IGMP[85]
"IGMP[85]: INTF
Process received group rec MODE_IS_EXCL for i/f 2 group 225.1.1.3 in mode EXCLUD
E. Num srcs 0"
 
38403 2007/02/01 11:46:41.64 UTC MINOR: DEBUG #2001 vprn100 IGMP[85]
"IGMP[85]: INTF
Process received group rec MODE_IS_EXCL for i/f 2 group 225.1.1.4 in mode EXCLUD
E. Num srcs 0"
 
38404 2007/02/01 11:46:41.64 UTC MINOR: DEBUG #2001 vprn100 IGMP[85]
"IGMP[85]: INTF
Process received group rec MODE_IS_EXCL for i/f 2 group 225.1.1.5 in mode EXCLUD
E. Num srcs 0"
 
38405 2007/02/01 11:46:48.93 UTC MINOR: DEBUG #2001 vprn100 IGMP[85]
"IGMP[85]: INTF
Process received group rec MODE_IS_EXCL for i/f 2 group 225.1.1.1 in mode EXCLUD
E. Num srcs 0"
38408 2007/02/01 11:46:48.93 UTC MINOR: DEBUG #2001 vprn100 IGMP[85]
"IGMP[85]: INTF
Process received group rec MODE_IS_EXCL for i/f 2 group 225.1.1.4 in mode EXCLUD
E. Num srcs 0"
 
38409 2007/02/01 11:46:48.93 UTC MINOR: DEBUG #2001 vprn100 IGMP[85]
"IGMP[85]: INTF
Process received group rec MODE_IS_EXCL for i/f 2 group 225.1.1.5 in mode EXCLUD
E. Num srcs 0"
 
38410 2007/02/01 11:46:48.93 UTC MINOR: DEBUG #2001 vprn100 IGMP[85]
"IGMP[85]: INTF
Interface 2 already UP, ignoring event"
A:FA#
mcs
Syntax 
[no] mcs [ip-int-name]
Context 
debug>router>igmp
Description 
This command enables debugging for IGMP MCS.
The
no form of the command disables debugging.
Parameters 
ip-int-name
Only displays the information associated with the specified IP interface name.
Sample Output
A:BA# debug router 100 igmp mcs 
A:BA# show debug 
debug
    router "100"
        igmp
            mcs
        exit
    exit
exit
A:BA# 
misc
Syntax 
[no] misc
Context 
debug>router>igmp
Description 
This command enables debugging for IGMP miscellaneous.
The
no form of the command disables debugging.
Sample Output
A:BA# debug router 100 igmp misc 
 
A:BA# show debug 
debug
    router "100"
        igmp
            misc
        exit
    exit
exit
A:BA# 
packet
Syntax 
[no] packet [query|v1-report|v2-report|v3-report|v2-leave] [ip-int-name | ip-address]
Context 
debug>router>igmp
Description 
This command enables debugging for IGMP packets.
The
no form of the command disables debugging.
Parameters 
query v1/v2/v3-report, v2-leave
Select the type of packet to debug.
ip-int-name
Only displays the information associated with the specified IP interface name.
ip-address
Only displays the information associated with the specified IP address.
Sample Output
A:BA# debug router 100 igmp packet 
A:BA# 
A:BA# show debug 
debug
    router "100"
        igmp
            packet
        exit
    exit
exit
5 2006/09/03 22:20:05.73 UTC MINOR: DEBUG #2001 vprn100 IGMP[2]
"IGMP[2]: TX-PKT
[000 18:25:24.480] ifId:2 ifName:IGMP_to_CE IGMP V3 PDU: 11.1.1.1 -> 224.0.0.1 p
duLen 12
    Type: QUERY maxrespCode 0xa checkSum 0xec78
    GroupAddr: 0.0.0.0
        S bit 0, QRV 2, QQIC 125, NumSources 0
        Source Address List:
"
6 2006/09/03 22:20:05.96 UTC MINOR: DEBUG #2001 vprn100 IGMP[2]
"IGMP[2]: RX-PKT
[000 18:25:24.710] ifId:2 ifName:IGMP_to_CE IGMP V3 PDU: 11.1.1.20 -> 224.0.0.22
 pduLen 48
    Type: V3 REPORT maxrespCode 0x0 checkSum 0x5fe2
    Num Group Records: 4
        Group Record 0
        Type: CHG_TO_EXCL, AuxDataLen 0, Num Sources 0
        Mcast Addr: 225.1.1.1
        Source Address List
        Group Record 1
        Type: CHG_TO_EXCL, AuxDataLen 0, Num Sources 0
        Mcast Addr: 225.1.1.2
        Source Address List
        Group Record 2
        Type: CHG_TO_EXCL, AuxDataLen 0, Num Sources 0
        Mcast Addr: 225.1.1.3
        Source Address List
        Group Record 3
        Type: CHG_TO_EXCL, AuxDataLen 0, Num Sources 0
        Mcast Addr: 225.1.1.4
        Source Address List
A:BA# 
*A:BA# no debug
Trace disabled for all existing and future clients
*A:BA# show debug 
debug
exit