For feedback, use the following:
ipd_online_feedback@alcatel-lucent.com
Table of Contents Previous Next Index PDF


WiFi Command Reference
Configuration Commands
•
•
•
•
•
•
•
•
•
•
 
 
WLAN-GW Commands
config
—
—
—
mgw-profile profile-name [create]
—
no mgw-profile profile-name
—
description description-string
—
—
interface-type {gn|s2a|s2b}
—
—
ip-ttl hops
—
—
keep-alive [interval seconds] [retry-count value] [timeout retry-seconds]
—
—
message-retransmit [timeout timeout] [retry-count value]
—
—
—
—
serving-network mcc mcc-value mnc mnc-value
—
 
configure
—
—
—
apn apn
—
—
—
address ip-prefix[/prefix-length] [mgw-profile profile-name]
—
no address ip-prefix[/prefix-length]
configure
—
—
—
—
apn apn
—
—
—
address ip-prefix[/prefix-length] [mgw-profile profile-name]
—
no address ip-prefix[/prefix-length]
 
 
RADIUS Server and Proxy Commands
configure
—
—
acct-on-off-group group-name [create]
—
—
description description-string
—
—
radius-server-policy policy-name [create]
—
—
—
—
acct-on-off monitor-group group-name
—
acct-on-off oper-state-change [group group-name]
—
—
—
—
—
—
—
acct-interim min min-val max max-val lifetime lifetime
—
—
acct-stop min min-val max max-val lifetime lifetime
—
—
description description-string
—
—
—
access-algorithm {direct | round-robin | hash-based}
—
—
hold-down-time [sec seconds] [min minutes]
—
—
retry count
—
—
router router-instance
—
router service-name service-name
—
—
server server-index name server-name
—
no server server-index
—
source-address ip-address
—
—
timeout [sec seconds] [min minutes]
—
 
 
configure
—
—
—
server server-name [address ip-address] [secret key ] [hash|hash2] [port port] [create]
—
no server server-name
—
—
—
—
—
—
coa-script-policy script-policy-name
—
—
description description-string
—
—
—
 
 
configure
—
—
—
server server-name [create] [purpose {[accounting | authentication | both]}]
—
no server server-name
—
—
key packet-type {accept|request} attribute-type attribute-type [vendor vendor-id]
—
—
—
timeout [hrs hours] [min minutes] [sec seconds]
—
—
track-accounting [stop] [interim-update] [accounting-on] [accounting-off]
—
—
—
—
—
—
description description-string
—
—
[no] interface interface-name
—
load-balance-key [vendor vendor-id [vendor-id...(upto 5 max)]] attribute-type attribute-type [attribute-type...(upto 5 max)]
—
load-balance-key source-ip-udp
—
—
secret secret [hash|hash2]
—
—
—
 
configure
—
—
—
—
server server-name [address ip-address] [secret key ] [hash|hash2] [port port] [create]
—
no server server-name
—
—
—
—
—
—
—
key packet-type {accept|request} attribute-type attribute-type [vendor vendor-id]
—
—
—
timeout [hrs hours] [min minutes] [sec seconds]
—
—
track-accounting [stop] [interim-update] [accounting-on] [accounting-off]
—
—
coa-script-policy script-policy-name
—
—
—
—
—
—
description description-string
—
—
[no] interface interface-name
—
load-balance-key [vendor vendor-id [vendor-id...(upto 5 max)]] attribute-type attribute-type [attribute-type...(upto 5 max)]
—
load-balance-key source-ip-udp
—
—
—
—
secret secret [hash|hash2]
—
—
—
—
username [1..32] [prefix-string prefix-string] [accounting-server-policy policy-name] [suffix-string suffix-string]
—
no username [1..32]
LUDB Matching for RADIUS Proxy Cache
config
—
—
local-user-db local-user-db-name [create]
—
no local-user-db local-user-db-name
—
—
—
—
fail-action {continue | drop}
—
—
mac-format mac-format
—
—
match {circuit-id|mac|remote-id}
—
match option [1..254]
—
—
server [service service-id] name server-name
—
 
Data Plane Related Commands
config
—
—
wlan-gw-group wlan-gw-group-id [create]
—
no wlan-gw-group wlan-gw-group-id
—
—
—
description description-string
—
—
iom slot-number
—
—
—
radius-accounting-policy nat-accounting-policy
—
—
—
reserved num-sessions
—
—
watermarks high percentage low percentage
—
—
 
Port Policy Commands
config
—
port-policy policy-name [create]
—
no port-policy policy-name
—
description description-string
—
—
egress-scheduler-policy port-sched-plcy
—
 
Soft-GRE Group Interface Commands
config
—
—
—
—
—
group-interface ip-int-name [create]
—
group-interface ip-int-name [create] lns
—
group-interface ip-int-name [create] softgre
—
no group-interface ip-int-name
—
ip-mtu octets
—
—
—
—
—
agg-rate-limit kilobits-per-second
—
—
hold-time infinite
—
hold-time [1..86400]
—
—
qos policy-id
—
—
scheduler-policy scheduler-policy-name
—
—
—
shaping {per-retailer|per-tunnel}
—
—
gw-address ip-address
—
—
gw-ipv6-address ipv6-address
—
—
—
hold-time time in s
—
—
trigger [data] [iapp]
—
—
router router-instance
—
—
—
tcp-mss-adjust segment-size
—
—
—
—
—
vlan start [0..4095] end [0..4095] retail-svc-id service-id
—
no vlan start [0..4095] end [0..4095]
—
wlan-gw-group group-id
—
—
 
WIFI Aggregation and Offload – Migrant User Support Commands
 
configure
—
—
http-redirect-policy policy-name [create]
—
—
description description-string
—
—
dst-port tcp-port
—
—
—
[no] dst-ip ip-address protocol ip-protocol dst-port port-number
—
—
—
url rdr-url-string
—
 
configure
—
—
vprn service-id/ies service-id
—
—
group-interface ip-int-name
—
—
—
—
—
hold-time [hrs hours] [min minutes] [sec seconds]
—
—
—
—
active-lease-time [hrs hours] [min minutes] [sec seconds]
—
—
initial-lease-time [hrs hours] [min minutes] [sec seconds]
—
—
—
—
primary-dns ip-address
—
—
primary-nbns ip-address
—
—
secondary-dns ip-address
—
—
secondary-nbns ip-address
—
—
—
—
agg-rate-limit kilobits-per-second
—
—
hold-time infinite
—
hold-time [1..86400]
—
—
qos policy-id
—
—
scheduler-policy scheduler-policy-name
—
—
—
shaping {per-retailer|per-tunnel}
—
—
gw-address ip-address
—
—
—
—
—
hold-time time in s
—
—
trigger [data] [iapp]
—
—
nat-policy policy-name
—
—
router router-instance
—
—
—
tcp-mss-adjust segment-size
—
—
—
mac-format mac-format
—
—
radius-proxy-cache router router-instance server server-name
—
—
—
—
—
[no] range start [0..4095] end [0..4095]
—
—
—
—
hold-time [hrs hours] [min minutes] [sec seconds]
—
—
—
—
active-lease-time [hrs hours] [min minutes] [sec seconds]
—
—
initial-lease-time [hrs hours] [min minutes] [sec seconds]
—
—
—
—
primary-dns ip-address
—
—
primary-nbns ip-address
—
—
secondary-dns ip-address
—
—
secondary-nbns ip-address
—
—
—
—
—
nat-policy policy-name
—
—
retail-svc-id service-id
—
—
mac-format mac-format
—
—
radius-proxy-cache router router-instance server server-name
—
—
wlan-gw-group group-id
—
 
Show Commands
show
—
—
—
radius-proxy-server server-name cache
—
radius-proxy-server server-name cache hex-key hex-string
—
radius-proxy-server server-name cache string-key string
—
radius-proxy-server server-name cache summary
—
radius-proxy-server server-name statistics
—
—
soft-gre-tunnels local-ip ip-address remote-ip ip-address ue
—
soft-gre-tunnels [local-ip ip-address] [remote-ip ip-address][isa-group wlan-gw-group-id] [member [1..255]] [summary] [detail]
 
show
—
—
—
radius-server-policy policy-name [acct-on-off]
—
radius-server-policy policy-name associations
—
radius-server-policy policy-name msg-buffer-stats
—
radius-server-policy policy-name statistics
—
radius-server-policy [acct-on-off]
 
show
—
—
wlan-gw-group wlan-gw-group-id
—
wlan-gw-group wlan-gw-group-id associations
—
wlan-gw-group wlan-gw-group-id member [1..255] [statistics]
—
 
show
—
—
—
gtp-session imsi imsi apn apn-string
—
gtp-session [mgw-address ip-address] [mgw-router router-instance] [remote-control-teid teid] [local-control-teid teid] [detail]
—
gtp-session imsi imsi
—
—
mgw-profile profile-name
—
mgw-profile profile-name associations
—
—
—
—
ue [vlan qtag] [mpls-label label] [retail-svc-id service-id] [ssid service-set-id] [previous-access-point ip-address]
—
ue mac ieee-address
 
Tools Commands
tools
—
—
—
acct-on [radius-server-policy policy-name] [force]
—
acct-off acct-off [radius-server-policy policy-name] [force] [acct-terminate-cause number]
—
—
—
radius-server-policy policy-name msg-buffer [session-id acct-session-id]]
—
—
 
Clear Commands
clear
—
—
radius-server-policy policy-name msg-buffer [acct-session-id acct-session-id]
—
radius-server-policy policy-name statistics [msg-buffer-only]
—
radius-server-policy policy-name server server-index statistics