Power up and power down
Previous pageGONext page

Purpose

This topic describes the steps to power up or power down a Lucent CM server or the Lucent CM system (all servers).

Sun FireTM X2100 M2 documentation

Procedure 1

 

Refer to

 

Hardware installation

 

Sun FireTM X2100 M2 Server Installation Guide

 

Cabling

 

Power up

 

Power down

 

Notes:

1

Some procedures are also available in other X2100 M2 guides.

Sun FireTM X2100 documentation

Procedure 1

 

Refer to

 

Hardware installation

 

Sun FireTM X2100 Server Getting Started Guide

 

Cabling

 

Power up

 

Power down

 

Notes:

1

Some procedures are also available in other X2100 guides.

Sun FireTM V20z documentation

Procedure 1

 

Refer to

 

Hardware installation

 

Sun FireTM V20z and Sun FireTM V40z Servers Installation Guide

 

Cabling

 

Power up

 

Power down

 

Sun FireTM V20z and Sun FireTM V40z Servers User Guide

 

Notes:

1

Some procedures are also available in other V20z guides.

Power down Lucent CM server

The procedure is valid for all types of nodes (A-node, D-node and U-node).

Task StepsPerform the following steps to power down a single Lucent CM server:

1

Log into the Lucent CM server as “root”.

2

Stop all Lucent CM processes on the server.

Enter the following commands:

  1. cd /opt/lps/current/ha

  2. ./stop_node

Reference:  Refer to topic Start and stop servers and applications using CLI.

3

Power down the Lucent CM server.

Reference:  Refer to the server hardware documentation for the procedure for your server.

End of steps

Power up Lucent CM server

The procedure is valid for all types of nodes (A-node, D-node and U-node).

Task StepsPerform the following steps to power up a single Lucent CM server:

1

Power up the Lucent CM server.

Reference:  Refer to the server hardware documentation for the procedure for your server.

2

Log into the Lucent CM server as “root”.

3

Start all Lucent CM processes on the server.

Enter the following commands:

  1. cd /opt/lps/current/ha

  2. ./start_node

Reference:  Refer to topic Start and stop servers and applications using CLI.

End of steps

Power down Lucent CM system

Task StepsPerform the following steps to power down all servers of Lucent CM system:

1

Log into a Lucent CM server as “root”.

2

Stop all Lucent CM processes on the Lucent CM system.

Enter the following commands:

  1. cd /opt/lps/current/ha

  2. ./ha_cli to access the HA CLI

  3. <CLI login>, enter any 3 characters to login to the HA CLI

  4. stop proc all

  5. quit to exit the HA CLI.

Reference:  Refer to topic Start and stop servers and applications using CLI.

3

Power down all Lucent CM servers of the Lucent CM system.

Reference:  Refer to the server hardware documentation for the procedure for your server.

End of steps

Power up Lucent CM system

Task StepsPerform the following steps to power up all servers of Lucent CM system:

1

Power up all Lucent CM servers.

Reference:  Refer to the server hardware documentation for the procedure for your server.

2

Log into a Lucent CM server as “root”.

3

Start all Lucent CM processes on the Lucent CM system.

Enter the following commands:

  1. cd /opt/lps/current/ha

  2. ./ha_cli to access the HA CLI

  3. <CLI login>, enter any 3 characters to login to the HA CLI

  4. start proc all

  5. quit to exit the HA CLI.

Reference:  Refer to topic Start and stop servers and applications using CLI.

End of steps

Previous page GO Next page
© Lucent Technologies