| Replace Lucent CM server components | |||
|
| GO | |
|
This topic describes the steps to replace hardware components of a Lucent CM server that is currently used in an active Lucent CM system.
Refer to the following documents for step-by-step procedures to replace components.
|
Server |
Chapter and document |
|
Sun Fire X2100 M2 |
Chapter “Maintaining the Sun Fire X2100 M2 Server” of the Sun Fire X2100 M2 Server Service Manual |
|
Sun Fire X2100 |
Chapter “Maintaining the Sun Fire X2100 Server” of the Sun Fire X2100 Server User Guide |
|
Sun Fire v20z |
Chapter “Maintaining the Sun Fire V20z Server” of the Sun Fire V20z and Sun Fire V40z Servers-User Guide |
Perform the following steps:
1 |
Stop the server. Reference: Refer to the topic “Start and stop a server”. |
2 |
Perform the replacement procedure. |
3 |
Start the server. Reference: Refer to the topic “Start and stop a server”. End of steps |
|
|
GO | |
|
| © Lucent Technologies | |||