Miscellaneous equipment and tools

Lightguide build-outs

Alcatel-Lucent 1665 DMX utilizes Alcatel-Lucent's state-of-the-art AllWave ADVANTAGE TM Fiber Optic Attenuators. These attenuators reduce optical power from the transmitter that can result in over-saturation of the receiver, have low reflection to meet stringent system requirements, and are backward-compatible with existing transmission systems. Unique to the AllWave ADVANTAGE optical connectivity solution (OCS), the LC TM optic attenuators are designed to provide flat spectral loss across the full spectrum, allowing the attenuators to be used in the 1300 nm, 1400 nm, and 1500 nm bands. LC optical attenuators are ideal for networks deploying AllWave fiber, metropolitan or regional networks, applications supported by conventional single-mode optical fiber, multiservice network protocols, and DWDM networks.

Table 7-2, Lightguide build-outs lists the available LC-type lightguide build-out attenuators for the Alcatel-Lucent 1665 DMX.

Table 7-2: Lightguide build-outs

Description		Comcode
LC Build-Out Attenuators¹
	5 dB	108279381
	10 dB	108279431
	15 dB	108279480
	20 dB	108279530
AllWave ADVANTAGE^TM Fiber Optic Identification Kit²		108622929

Notes:

The LC build-out attenuators listed are polished connector (PC) style connectors at the fiber end. These attenuators must be used on the receive side in all cases. For the LNW37, LNW45 OC-3 and LNW49 OC-12 circuit packs, the specified attenuation may not be achieved if a SM-MM (single-mode-multi-mode) fiber signal is incoming to the LC SM-SM attenuator. In this case, a 15 dB attenuator, for example, may achieve an attenuation value less than the specified 15 dB.
The AllWave ADVANTAGE Fiber Optic Identification Kit includes labels for fiber optic apparatus products to identify Alcatel-Lucent AllWave Fiber paths. An instruction sheet is included with recommendations on how to install and use the labels.

Pluggable transmission modules

Alcatel-Lucent 1665 DMX utilizes Pluggable Transmission Modules (PTMs), on the LNW37, LNW45, LNW49, LNW55, LNW59, LNW62, LNW63, LNW64, LNW73/73C, LNW74, LNW82, LNW87, LNW202, LNW203, LNW402, LNW502, LNW504, LNW603 LNW170, and LNW705 packs.

To ensure proper optical performance, mechanical fit, compliance with EMC, and compliance with laser safety standards, the Alcatel-Lucent approved PTM transceivers listed in Chapter 10, Technical specifications must be used.

Only the Alcatel-Lucent specified PTM transceivers listed in Chapter 10, Technical specifications are compatible with Alcatel-Lucent 1665 DMX software. If non-Alcatel-Lucent specified PTM transceivers are installed in Alcatel-Lucent 1665 DMX, the system will reject that transceiver, and that optical port will be inoperable until approved parts are installed.

Important!

Use only the Alcatel-Lucent specified Class 1 transceivers listed in the referenced tables.

OC-3 PTMs

The LNW37, LNW45, LNW55, LNW82, LNW705 packs support OC-3 PTMs.

See Table 10-46, OC-3 PTMs.

OC-12 PTMs

The LNW49, LNW55, LNW82, LNW203, , and LNW705 packs support OC-12 PTMs.

See Table 10-47, OC-12 PTMs.

OC-48 PTMs

The LNW55, LNW62, LNW82, LNW202, LNW504 LNW402 and LNW705 packs support OC-48 PTMs.

See Table 10-48, OC-48 PTMs.

OC-192 PTMs

The LNW59, LNW504, LNW502, LNW603, LNW705 packs support OC-192 PTMs.

See Table 10-49, OC-192 PTMs.

Ethernet/SAN PTMs

The LNW63, LNW64, LNW73/73C, LNW74, LNW87, LNW170, and LNW705 circuit packs support Ethernet/SAN PTMs.

See Table 10-79, Ethernet/SAN PTMs.

Blanks

See Blank circuit packs for the orderable blanks.

Additional equipment

See Alcatel-Lucent 1665 Data Multiplexer (DMX) Engineering and Ordering Information, ED8C871-10 for additional information about orderable items, like the fan filter and cable management brackets.

Accessories

The table below shows the miscellaneous accessories available for Alcatel-Lucent 1665 DMX.

Table 7-3: Miscellaneous accessories

Product	Model/Description	Comcode	ITE#	Installation Order #
Optical Fiber Scope	Noyes OFS 300-200X	408197028	ITE-7129	33712900
2.5mm Universal Adapter Cap	For use with the Noyes OFS 300-200X	408197044	ITE-7129D1	33712901
1.25mm Universal Adapter Cap	For use with the Noyes OFS 300-200X	408197069	ITE-7129D2	33712902
Video Fiber Scope¹	Noyes VFS-1	TBD	TBD	TBD
Individual, presaturated alcohol wipes	99% pure isopropyl alcohol	901375147	ITE-7136	33713600
CLETOP Cleaning Cassette	Type A Reel	901375154	ITE-7137	33713700
CLETOP Cleaning Cassette Replacement Reel	Type A Reel	901375014	ITE-7137 D1	33713701
Luminex Stick port cleaners	1.25 mm	901375030	ITE-7134	33713400
Luminex Stick port cleaners	2.5 mm	901375022	ITE-7135	33713500
Luminex Stick port cleaners	5.5" x 5.5"	408201226	R6033	23603300

Notes:

This equipment may not be necessary at all locations. It is to be used when the ports need to be verified for cleanliness. If care is exercised when cleaning fibers, the video scope may not be needed.