The 1000BASE-ZX PTMs can be used for GbE service over Single-Mode Fiber (SMF). The 1000BASE-ZX PTMs are OSP hardened for outside plant applications.
The following are the 1000BASE-ZX system specifications:
The 1000BASE-ZX optical transmitter meets the specifications defined in IEEE802.3. The table below shows some of the 1000BASE-ZX optical transmitter specifications.
Description |
1000BASE-ZX |
---|---|
Transmitter type |
Longwave Laser |
Signaling speed (range) |
1.25 GBd (±100 ppm) |
Wavelength (λ, range) |
1500 to 1580 nm |
Trise/Tfall (max; 20%−80% response time) |
0.26 ns |
Maximum Spectral Width (Δλ20) |
+1.0 nm |
Average launch power (max) |
+5.0 dBm |
Average launch power (min) |
0 dBm |
Average launch power of OFF transmitter (max) |
−40.0 dBm |
RIN (max) |
−120 dB/Hz |
The 1000BASE-ZX receiver meets the specifications defined in the table below.
Description |
1000BASE-ZX |
---|---|
Signaling speed (range) |
1.25 GBd (±100 ppm) |
Wavelength (range) |
1500 to 1580 nm |
Average receive power (max) |
0 dBm |
Receive sensitivity |
−22.5 dBm |
Return loss (min) 1 |
12.0 dB |
The worst-case power budget and link penalties for a 1000BASE-ZX channel are shown in the table below.
Parameter |
1000BASE-ZX |
---|---|
Maximum Channel Insertion Loss |
+21.0 dB |
Minimum Channel Insertion Loss |
+5.0 dB |
Maximum Dispersion |
1600 ps/nm |
Optical Path Penalty |
+1.5 dB |
The 1000BASE-ZX Ethernet/SAN interface complies with the following formatting standards:
Ethernet to SONET Mapping, G.7041 (GFP) and G.707 (Virtual Concatenation)
Protection (SONET and/or 802.1W) and Ethernet Bridging (802.1D)
Performance monitoring capabilities are available on the 1000BASE-ZX interface. A detailed list of monitored parameters can be found in Performance monitoring.
November 2011 | Copyright © 2011 Alcatel-Lucent. All rights reserved. |