Power specifications

Power supply

The following table lists Alcatel-Lucent 1665 DMX High-Capacity shelf power requirements.

Table 10-105: Alcatel-Lucent 1665 DMX power supply requirements

Item	30-amp shelf	20-amp shelf
Circuit Breakers (two per shelf)	30.0 A	20.0 A
Voltage range, all components	−40.0V to −60.0 VDC
Power Feeders	two −48V power feeders [BREAKER (A) and BREAKER (B)]

Circuit breakers

Alcatel-Lucent 1665 DMX uses on-board power conversion eliminating the need for slots for bulk power converters. Two independent −48V office power feeders (A and B) enter the shelf through connectors and are filtered and distributed to the circuit packs through circuit breakers. Power conversion is performed through modular power converters located on the circuit packs. In each circuit pack, the feeders are diode ORed, fused, filtered, and regulated by the board-mounted power modules. This provides the required redundancy in case of the loss of one feeder or circuit breaker. The green Power LEDs located next to each circuit breaker (A and B) indicate power is being fed to the breaker.

Current drains

The following table provides current drain information for Alcatel-Lucent 1665 DMX shelves with a single power feed.

Table 10-106: Current drains

Shelf	Current Drain @ −48V	Current drain @ −40V
Alcatel-Lucent 1665 DMX 30-amp High Capacity Shelf	23A	27.5A 1
Alcatel-Lucent 1665 DMX 20-amp High Capacity Shelf	14.6A	17.5A 2

Notes:

1. If your shelf is equipped with 1xLNW2, 2xLNW59s, 10xLNW170s, and 1xFan unit, and you lose one power feed or circuit breaker, the shelf’s current drain will exceed the 30.0A capacity of the remaining circuit breaker and your shelf will lose power.

2. In the following four configurations, if you lose one power feed or circuit breaker, the shelf’s current drain will exceed the 20.0A capacity of the remaining circuit breaker and your shelf will lose power: Configuration 1: 1xLNW2, 2xLNW59s, 10xLNW170s, and 1xFan unit; Configuration 2: 1xLNW2, 2xLNW59s, 10xLNW20s, and 1xFan unit; Configuration 3: 1xLNW2, 2xLNW59s, 8xLNW20s 2x(any OC-n low-speed circuit pack), and 1xFan unit; Configuration 4: 1xLNW2, 2xLNW82s, 10xLNW170s, and 1xFan unit.

Heat dissipation

The following list provides maximum heat dissipation information for Alcatel-Lucent 1665 DMX.

Table 10-107: Maximum heat dissipated

Shelf	Maximum Heat Dissipated
Alcatel-Lucent 1665 DMX 30-amp High Capacity Shelf	1100 Watts
Alcatel-Lucent 1665 DMX 20-amp High Capacity Shelf	700 Watts