Procedure 5-38: Clear "Extra Traffic Preempted" condition
Before you begin
Prior to performing this procedure:
-
Refer to Before you begin and Required equipment in this chapter.
-
Refer to Laser safety and Electrostatic discharge in Chapter 1, Safety.
Steps
Complete the following steps to clear an Extra Traffic Preempted condition.
1 |
From the WaveStar® CIT System View, click the Alarm List button and locate the Extra Traffic Preempted condition in the resulting alarm list and note the corresponding AID. | ||||||
2 |
In the alarm list, are there any inc. OCN or inc. STSN alarms present?
| ||||||
3 |
From the System View, click the Alarm List button and click Refresh. | ||||||
4 |
Is the Extra Traffic Preempted condition still present?
| ||||||
5 |
In the alarm list, are there any manual switches or forced switches present?
| ||||||
6 |
From the System View, click the Alarm List button and click Refresh. | ||||||
7 |
Is the Extra Traffic Preempted condition still present?
End of steps |