inc. (from fiber) DS1 RAI

Description

An LNW20 TMUX port in the portless mode has detected an incoming Remote Alarm Indication (RAI).

Alarm Data

Value/Meaning

Severity Levels

Critical (CR), Major (MJ), Minor (MN), Not Alarmed (NA), Not Reported (NR)

Default: Not Alarmed (NA)

ASAP Type

DS1 Port

AID Type

DS1 Port

Date

Month/day/year that the condition was detected

Time

Hour:minute:second that the condition was detected

Probable Cause

RAI-EGR (Remote Alarm Indication in Egress Position)

Effect on Service

NSA

Alarm Entity Type

T1

Description

inc. (from fiber) DS1 RAI

Likely Cause

A remote incoming signal failure was detected at the interfacing customer equipment that is connected to the far-end SONET network element.

Visible Indication

Lighted CR, MJ, or MN LED on the SYSCTL faceplate (when the severity level is provisioned to Critical, Major, or Minor, respectively)

Action

Proceed to Procedure 5-55: Clear "inc. (from fiber) DSn RAI" alarms.

November 2011Copyright © 2011 Alcatel-Lucent. All rights reserved.