The bit error ratio (BER) in the incoming OC-N signal exceeds the provisioned failure threshold of 10-3 (default).
|
Alarm Data |
Value/Meaning |
|---|---|
|
Severity Levels |
Critical (CR), Major (MJ), Minor (MN), Not Alarmed (NA), Not Reported (NR) SA Default: Critical (CR) NSA Default: Minor (MN) |
|
ASAP Type |
OCn Port |
|
AID Type |
OC-N Line |
|
Date |
Month/day/year that the condition was detected |
|
Time |
Hour:minute:second that the condition was detected |
|
Probable Cause |
T-BERL (incoming line signal BER thresholds exceeded) |
|
Effect on Service |
SA or NSA |
|
Alarm Entity Type |
OC3, OC12, OC48, or OC192 |
|
Description |
inc. OC3 sig. failed, inc. OC12 sig. failed, inc. OC48 sig. failed, or inc. OC192 sig. failed |
|
Likely Cause |
The OC-N OLIU circuit pack failed at the near end, the receive fiber failed, or the OLIU circuit pack failed at the far end. An unprotected line/port carrying service failed: SA. A protected line/port failed: NSA. |
|
Visible Indication |
Lighted CR, MJ, or MN LED on the SYSCTL faceplate (when the severity level is provisioned to Critical, Major, or Minor, respectively) and a flashing Fault LED on the alarmed circuit pack. |
|
Action |
Proceed to Procedure 5-68: Clear "inc. OCN" alarms. |
| November 2011 | Copyright © 2011 Alcatel-Lucent. All rights reserved. |