There is discontinuity in the circuit path.
|
Alarm Data |
Value/Meaning |
|---|---|
|
Severity Levels |
Critical (CR), Major (MJ), Minor (MN), Not Alarmed (NA), Not Reported (NR) Default: Major (MJ) |
|
ASAP Type |
BLSR Protection Group |
|
AID Type |
STS-n Ring Channel VT1.5 Ring Channel |
|
Date |
Month/day/year that the condition was detected |
|
Time |
Hour:minute:second that the condition was detected |
|
Probable Cause |
PAINTGRT (Path Integrity) |
|
Effect on Service |
NSA |
|
Alarm Entity Type |
COM |
|
Description |
Path Integrity Failure |
|
Likely Cause |
Cross-connect provisioning error (for example, missing pass-through) at some point in the circuit. |
|
Visible Indication |
Lighted CR, MJ, or MN LED on the SYSCTL faceplate (when the severity level is provisioned to Critical, Major, or Minor, respectively) |
|
Action |
Proceed to Procedure 5-112: Clear "Path Integrity Failure" alarm. |
| November 2011 | Copyright © 2011 Alcatel-Lucent. All rights reserved. |