Before you begin

Before you begin

Prior to performing procedures in this chapter,

1. Refer to Laser safety and Electrostatic discharge information in Chapter 1, Safety.

2. If not previously completed, install generic and WaveStar^® CIT software on the PC.

   Refer to Procedure 14-1: Install software on the PC.

3. Connect PC and establish a WaveStar^® CIT session. Refer to Procedure 14-2: Connect Personal Computer (PC) and establish WaveStar^® CIT session.

Required equipment

The procedures in this chapter require the following equipment:

• Personal Computer (PC) with WaveStar^® CIT software installed

• Wrist strap

Important!

If additional equipment is required to perform a specific procedure, that additional equipment is listed in that procedure.