Procedure 8-3: Initialize performance monitoring (PM) registers
Overview
Important!
Executing this procedure will reset and clear the PM register(s) selected. Ensure you want to execute this procedure before continuing.
Use this procedure to initialize all current 15-minute and/or current 1-day PM registers. PM registers for the previous 15-minute and previous 1-day time periods are not affected.
Privilege level
You may log in as a Privileged, General, or Maintenance user to complete this procedure.
Before you begin
Prior to performing this procedure, refer to Before you begin and Required equipment in this chapter.
Steps
Perform the following steps to initialize (clear) the current 15-minute and/or current 1-day PM registers.
1 |
Which register do you wish to initialize?
| ||||||||
2 |
From the System View menu, select Performance → Initialize PM Registers → 15-Min. Result: A dialog box appears asking you to confirm executing this command. | ||||||||
3 |
Click Yes. Result: All current 15-minute PM registers are cleared. PM registers for the previous 15-minute time periods are not affected. | ||||||||
4 |
STOP! End of Procedure. | ||||||||
5 |
From the System View menu, select Performance → Initialize PM Registers → 1-Day. Result: A dialog box appears asking you to confirm executing this command. | ||||||||
6 |
Click Yes. Result: All current 1-day PM registers are cleared. PM registers for the previous 1-day time periods are not affected. | ||||||||
7 |
STOP! End of Procedure. | ||||||||
8 |
From the System View menu, select Performance → Initialize PM Registers → Both. Result: A dialog box appears asking you to confirm executing this command. | ||||||||
9 |
Click Yes. Result: All current 15-minute and current 1-day PM registers are cleared. PM registers for the previous 15-minute and previous 1-day time periods are not affected. End of steps |