Procedure 14-1.2: Install Alcatel-Lucent 1665 DMXtend software on your PC

- Overview

Use this procedure to install the Alcatel-Lucent 1665 DMXtend software on your personal computer (PC).

- Before you begin

Before performing this procedure, complete Procedure 14-1: Install software on the PC.

Steps
 
1

In the WaveStar CIT CD Browser window, click on NE Software, click NE Software (Copy the NE Software to the PC) on the right.

Result:

A Copying files, please wait window appears.


2

When the window closes, the software files are successfully copied into the generics directory on your PC. By default, this directory is C:\Program Files\Alcatel-Lucent\WaveStar CIT\generics\DXT\9.1.0\p, however, the actual directory is determined by the path defined in Step 10 of Procedure 14-1.1: Install WaveStar® CIT software on your PC.


3

Do you wish to install the WaveStar® CIT software?

If...

Then...

WaveStar®

Proceed to Procedure 14-1.1: Install WaveStar® CIT software on your PC.

No

Stop! End of Procedure.


End of steps

November 2011Copyright © 2011 Alcatel-Lucent. All rights reserved.