Procedure 2-12: Backup and restore NE database via FTAM
Overview
Use this procedure to backup and restore the local NE database via the File Transfer and Access Management (FTAM) protocol. Scheduled automatic backups are not supported using FTAM.
Privilege level
You must log in as a Privileged user to complete this procedure.
Required equipment
In addition to Required equipment listed in this chapter, CAT5 Ethernet cable with either a 10/100 hub or a cross-over cable for the LAN or IAO LAN port (required for TCP/IP connectivity) is also required.
Before you begin
Before performing this procedure,
-
Refer to Before you begin and Required equipment in this chapter.
-
Refer to Electrostatic discharge in Chapter 1, Safety.
Steps
Complete the following steps to backup and restore the system.
1 |
Connect the PC and establish a WaveStar® CIT session to the local Network Element that is to be backed up or restored. Important! You must login via OSI. Reference: Procedure 14-2: Connect Personal Computer (PC) and establish WaveStar® CIT session | ||||||
2 |
End of steps |