Before you begin

Before you begin

Before performing procedures in this chapter:

  1. If not previously completed, install generic and WaveStar® CIT software on the PC. Refer to Procedure 14-1: Install software on the PC.

  2. Connect PC and establish a WaveStar® CIT session.

    Refer to Procedure 14-2: Connect Personal Computer (PC) and establish WaveStar® CIT session.

Required equipment

The procedures in this chapter require the following equipment:

Important!

If additional equipment is required to perform a specific procedure, that additional equipment is listed in that procedure.

November 2011Copyright © 2011 Alcatel-Lucent. All rights reserved.