Prior to performing all procedures in this chapter,
If not previously completed, install generic and WaveStar® CIT software on the PC. Refer to Procedure 14-1: Install software on the PC.
Connect PC and establish a WaveStar® CIT session.
Refer to Procedure 14-2: Connect Personal Computer (PC) and establish WaveStar® CIT session.
All procedures in this chapter require that the following equipment is available:
Important!
If additional equipment is required to perform a specific procedures, that additional equipment is listed in that procedure.
November 2011 | Copyright © 2011 Alcatel-Lucent. All rights reserved. |