Release the ACO TEST push-button on the LNW2 SYSCTL when the red rectangle disappears in the IND display.

Result:

The current software generic appears in the IND display on the LNW2 SYSCTL and the shelf LEDs return to their previous status.

From the Network View of the WaveStar^® CIT session you established in Procedure 12-8: Upgrade or replace SYSCTL (LNW2) circuit pack, select the View: pull-down menu and select CIT OSI Neighbors.

Important!

This View: is not the menu bar item View → ...; it is located above the NE Name pull-down menu.

From the Network View, select View → Refresh OSI View.

Result:

The CIT OSI neighbor(s) are automatically detected.

Your TID will be your original TID, the same TID provisioned on your NE prior to the SYSCTL replacement.

In the Network View, right-click the NE icon that was detected, and select Graphical Using → OSI from the resulting menu.

Result:

The System Type Selection window appears.

In the System Type Selection window, select DMXtend and click OK.

Result:

The NE Login Dialog window appears.

In the NE login window, login to the shelf using your original user ID and password; the same user ID and password provisioned prior to the SYSCTL replacement.

Click OK.

Result:

The title bar of the System View and the legal notice text should both reflect the current NE software generic, for example: 9.1.0.

Reference:

Procedure 14-2: Connect Personal Computer (PC) and establish WaveStar^® CIT session

Is the Generic Software Version correct?

End of steps