Procedure 5-27: Clear "environmentn" alarm
Before you begin
Prior to performing this procedure:
-
Refer to Before you begin and Required equipment in this chapter.
-
Refer to Electrostatic discharge in Chapter 1, Safety.
Steps
Complete the following steps to clear an environmentn alarm/condition.
1 |
From the WaveStar® CIT System View, click the Alarm List button and locate the environmentn alarm/condition in the resulting alarm list. | ||||||||
2 |
Determine the alarm level(s) for the active environmentn alarm(s). Clear the alarms in order of severity. | ||||||||
3 |
Refer to the Probable Cause column in the alarm list, and note the corresponding AID. | ||||||||
4 |
From the System View, select View → Misc. Discretes and expand Input. Result: The View Miscellaneous Discretes window opens. | ||||||||
5 |
Can you clearly identify the cause of the condition?
End of steps |