The following information identifies the supported circuit packs, the initial compatible software release, and the compatible shelf slot.
Table 4-1, Circuit packs in Alcatel-Lucent 1850 TSS-5 shelf contains a list of each circuit pack supported by Alcatel-Lucent 1850 TSS-5, indicates the slots into which they can be installed, and the release supported by each circuit pack.
|
Circuit Pack |
Apparatus Code |
Slot(s) |
Release |
Comments |
|---|---|---|---|---|
|
Apparatus Blank |
199SC |
Function Group C and CTL |
3.0 |
Filler plate to be used in |
|
Interface unit |
VLIU1 |
VLIU |
3.0 |
Required for shelf operation. Supports up to 8 electrical DS1/E1 ports. Supports equipment protection for VLNC50 circuit packs. |
|
Interface unit |
VLIU2 |
VLIU |
5.0 |
Required for shelf operation. Supports up to 28 electrical DS1/E1 ports. Does not support equipment protection. |
|
Interface unit |
VLIU3 |
VLIU |
7.0 |
Required for shelf operation. Supports up to 16 electrical DS1/E1 ports and Time of Day. Does not support equipment protection. |
|
Interface unit |
VLIU10 |
VLIU |
5.0 |
Required for shelf operation. Supports up to 28 electrical DS1/E1 ports. Supports equipment protection for VLNC50 and VLNC52 circuit packs. Does not support the VLNC40/42/42B. |
|
System Controller (SYSCTL) |
VLNC2 |
CTL |
3.0 |
Extended temperature certification for outside cabinet deployment (OSP Hardened) |
|
100 F Optical FE Port Expander (3 optical FE PTM-based ports) |
VLNC33 |
Function Group C |
7.2 |
Provides up to 3 Optical Fast Ethernet (100 F) PTM ports. The circuit pack serves as an extension board for VLNC42B Ethernet Aggregator circuit pack. OSP hardened. VLNC42B required. |
|
10/100 Private Line (2 optical ports and 4 electrical ports) |
VLNC35 |
Function Group C |
5.1 |
Support for the 4 10/100BASE-T ports on the access panel and 2 100BASE-LX ports on the faceplate (via PTM optics). Supports Ethernet Private Lines, OSP hardened. SYSCTL circuit pack and at least one VLNC50/52/55 are required. |
|
10/100/1G-T/F Ethernet Aggregator |
VLNC40 |
MAIN 2 |
3.0 |
Supports 20 10/100 Mb/s Fast Ethernet ports in Group A 1 and 4 PTM (100/1000BASE-X) ports. SYSCTL circuit pack not required. |
|
10/100/1G-T/F Ethernet Aggregator |
VLNC42/ VLNC42B |
MAIN 2 |
5.1 |
Supports 20 10/100 Mb/s Fast Ethernet ports in Group A 1 and 4 PTM (100/1000T/F) ports. SYSCTL circuit pack not required. |
|
OC-3/OC-12/STM-1/STM-4/ 8DS1E1/3DS3E3/1G SONET/ SDH Transport |
VLNC50 |
MAIN 1, MAIN 2 4 |
3.0 |
Supports up to 2 OC-3/STM-1 or OC-12/STM-4 PTMs, one GbE Ethernet PTM, 8 DS1/E1 ports, and 3 DS3/E3 ports. SYSCTL circuit pack is required. |
|
OC-3/OC-12/STM-1/STM-4/ 28DS1/21E1/3DS3E3/1G SONET/ SDH Transport |
VLNC52 |
5.0 |
Supports up to 2 OC-3/STM-1 or OC-12/STM-4 PTMs, one GbE Ethernet PTM, 28 DS1/21 E1 ports, and 3 DS3/E3 ports. SYSCTL circuit pack is required. | |
|
OC-3/12/48-STM-1/4/16 28DS1/E1/3DS3E3/1G SONET/ SDH Transport |
VLNC55 |
7.1 |
Supports up to 2 OC-3/STM-1, OC-12/STM-4, or OC-48/STM-16 PTMs, one GbE Ethernet PTM 6, 28 DS1/21 E1 ports, and 3 DS3/E3 ports. SYSCTL circuit pack is required. | |
|
8DS1/E1-100/1G-T/F Circuit Emulator |
VLNC60 |
MAIN 1, MAIN 2 |
4.0 |
Supports up to 2 FE/GbE PTMs and 8 DS1/E1 ports. SYSCTL circuit pack is not required. |
|
16DS1/E1-100/1G-T/F Circuit Emulator |
VLNC61 |
MAIN 1 2, MAIN 2 |
5.0 |
Supports up to 2 FE/GbE PTMs and 16 DS1/E1 ports. SYSCTL circuit pack is not required. |
|
8DS1/E1-100/1G-T/F Circuit Emulator |
VLNC62 |
MAIN 1 3, MAIN 2 |
7.0 |
Supports up to 2 FE/GbE PTMs and 8 DS1/E1 ports. SYSCTL circuit pack is not required. |
|
OC3/OC12- STM1/STM4- 100/1G-T/F Circuit Emulation Mini-hub |
VLNC64 |
MAIN 1, MAIN 2 |
4.1 |
Supports up to 2 FE/GbE PTMs and 1 OC-3/STM-1 PTM. SYSCTL circuit pack is not required. |
On the VLIU1, these ports appear on RJ-45 jacks numbered 9–28. On the VLIU2, these ports appear on RJ-45 jacks numbered 41–60.
A VLNC52/55 or VLNC61 installed in MAIN1 requires either the VLIU2 or VLIU10 interface unit.
The VLIU1, VLIU2, or VLIU3 interface unit is required to support the VLNC62 circuit pack. The VLIU3 interface unit is required if Time of Day feature is desired.
A VLNC50 installed in MAIN1 and MAIN2 requires either the VLIU1 or VLIU10 interface unit.
A VLNC52/55 installed in MAIN1 and MAIN2 requires the VLIU10 interface unit.
Due to a hardware limitation, the GbE interface can only provide 622 MB/sec of bandwidth.
Important!
Changes may be made to offerings at any time and without notice.
| Copyright © 2011 Alcatel-Lucent. All rights reserved. |