The 1000BASE-BX40 PTMs can be used for GbE service over Single-Mode Fiber (SMF).
The following are the 1000BASE-BX40 system specifications:
Optical Line Rate: 1.25 Gb/s (±100 ppm)
Opical Line Coding: 8B/10B
Fiber Type: 10 μm SMF
Minimum Range: 2 to 40,000 meters
Performance: Long-reach (40 km)
Temperature range: Industrial temperature (−40°C to +85°C)
The 1000BASE-BX40 optical transmitter meets the specifications listed in the following table.
Description |
1000BASE-BX40 Downstream |
1000BASE-BX40 Upstream |
---|---|---|
Transmitter type |
Longwave Laser | |
Signaling speed (range) |
1.25 GBd (±100 ppm) | |
Wavelength (λ) |
1480 to 1500 nm |
1260 to 1360 nm |
Maximum Spectral Width (Δλ20) |
1.0 nm |
1.0 nm |
Average launch power (max) |
+2.0 dBm |
+2.0 dBm |
Average launch power (min) |
−3.0 dBm |
−3.0 dBm |
Average launch power of OFF transmitter (max) |
−45.0 dBm |
−45.0 dBm |
The 1000BASE-BX40 receiver meets the specifications defined in the table below.
Description |
1000BASE-BX40 Downstream |
1000BASE-BX40 Upstream |
---|---|---|
Signaling speed (range) |
1.25 GBd (±100 ppm) | |
Wavelength (λ) |
1260 to 1360 nm |
1480 to 1500 nm |
Average receive power (max) |
−3.0 dBm |
−3.0 dBm |
Receive sensitivity |
−25.0 dBm |
−25.0 dBm |
Return loss (min) 1 |
12.0 dB |
12.0 dB |
The worst-case power budget and link penalties for a 1000BASE-BX40 channel are shown in the table below.
Parameter |
1000BASE-BX40 Downstream |
1000BASE-BX40 Upstream |
---|---|---|
Maximum Channel Insertion Loss |
21.0 dB |
21.0 dB |
Minimum Channel Insertion Loss |
5.0 dB |
5.0 dB |
Maximum Dispersion |
700 ps/nm |
|256| ps/nm |
Optical Path Penalty |
1.0 dB |
1.0 dB |
Target Distance 1 |
40 km |
40 km |
Copyright © 2011 Alcatel-Lucent. All rights reserved. |