The 1000BASE-LCWDM PTMs can be used for Coarse Wavelength Division Multiplexing (CWDM) GbE service over Single-Mode Fiber (SMF). The 1000BASE-LCWDM PTMs are hardened for extended temperature applications.
The following are the 1000BASE-LCWDM system specifications:
Optical Line Rate: 1.25 Gb/s (±100 ppm)
Optical Line Coding: 8B/10B
Fiber Type: 10 μm SMF
Minimum Range: 2 to 96,000 meters
Temperature range: Extended temperature (−5°C to +85°C)
The 1000BASE-LCWDM optical transmitter meets the specifications listed in the following table.
Description |
1000BASE-LCWDM |
---|---|
Transmitter type |
Distributed Feed-Back (DFB) Laser |
Signaling speed (range) |
1.25 GBd (±100 ppm) |
Wavelength (λ) |
|
Minimum Wavelength |
λc −7 nm |
Maximum Wavelength |
λc +7 nm |
Trise/Tfall (max; 20%−80% response time) |
0.26 ns |
Maximum Spectral Width (Δλ20) |
1 nm |
Average launch power (max) |
+5 dBm |
Average launch power (min) |
−1.0 dBm |
Average launch power of OFF transmitter (max) |
−40 dBm |
RIN (max) |
−120 dB/Hz |
Apparatus Code |
Channel # |
Wavelength |
---|---|---|
SGEC47EL |
47 |
1471 nm |
SGEC49EL |
49 |
1491 nm |
SGEC51EL |
51 |
1511 nm |
SGEC53EL |
53 |
1531 nm |
SGEC55EL |
55 |
1551 nm |
SGEC57EL |
57 |
1571 nm |
SGEC59EL |
59 |
1591 nm |
SGEC61EL |
61 |
1611 nm |
The 1000BASE-LCWDM receiver meets the specifications defined in the table below.
Description |
1000BASE-LCWDM |
---|---|
Signaling speed (range) |
1.25 GBd (±100 ppm) |
Average receive power (max) |
−9.0 dBm |
Receive sensitivity |
−29.0 dBm |
Return loss (min) |
24.0 dB |
The worst-case power budget and link penalties for a 1000BASE-LCWDM channel are shown in the table below.
Parameter |
1000BASE-LCWDM |
---|---|
Maximum Channel Insertion Loss |
28.0 dB |
Minimum Channel Insertion Loss |
14.0 dB |
Maximum Dispersion |
1600 ps/nm |
Optical Path Penalty |
2.0 dB |
Target Distance 1 |
96 km |
Copyright © 2011 Alcatel-Lucent. All rights reserved. |