Procedure 5-18: Clear "environmentn" alarm
Before you begin
Prior to performing this procedure, refer to Before you begin and Required equipment in this chapter.
Steps
Complete the following steps to clear an environmentn alarm/condition.
1 |
From the WaveStar® CIT System View, click on the Alarm List button and locate the environmentn alarm/condition in the resulting alarm list. | ||||||||
2 |
Determine the alarm level(s) for the active environmentn alarm(s). Clear the alarms in order of severity. | ||||||||
3 |
Refer to the Probable Cause column in the alarm list, and note the corresponding AID. | ||||||||
4 |
From the System View, select View → Misc. Discretes and expand Input. Result: The View Miscellaneous Discretes window opens. | ||||||||
5 |
Can you clearly identify the cause of the condition?
End of steps |