Configure ETS flow performance monitoring

Procedure 10-2.1: Configure ETS flow performance monitoring

Overview

Use this procedure to configure ETS flow performance monitoring.

Before you begin

Obtain the work instructions for this procedure.

Step


1	Log in to the VLNC42B circuit pack being provisioned.
2	From the Navigation menu, select ETS Flow Services → Performance Monitoring → PM Mode Configuration. Result: The ETS PM Mode Configuration screen appears.
3	Enter the required parameters, then click Submit to update the PM State for the selected ETS InFlow. Reference: ETS PM Mode Configuration parameters. End of steps

ETS PM Mode Configuration parameters

Parameter	Value	SNMP
ETS Flow ID	The ETS Flow ID. This is a drop-down list containing all ETS Incoming Flow IDs in the system. The default is the first ETS Incoming Flow ID.	OpticsIMETSIn- FlowIndex
PM State	This parameter specifies whether the PM data collection is enabled or disabled for the selected ETS Flow. Valid values: ON, DISABLED. PMSTATE=ON: PM collection for all MONTYPE is enabled, PM counters are reset. Current data and History data are retrievable. PMSTATE=DISABLED: PM collection for all MONTYPE is disabled. Current data and History data are not retrievable.	enhEtsInFlowCDRowStatus Step-Enable- ETSIn-PM Step-Enable- ETSIn-PM
Time Period	This parameter identifies the accumulation time period for performance monitoring data (1-day or 15-minute collection register). Valid values: 15-MIN, 1 - DAY.	enhEtsIn- FlowCDGranularityPeriod

Parameter

Value

SNMP

ETS Flow ID

The ETS Flow ID. This is a drop-down list containing all ETS Incoming Flow IDs in the system. The default is the first ETS Incoming Flow ID.

OpticsIMETSIn- FlowIndex

PM State

This parameter specifies whether the PM data collection is enabled or disabled for the selected ETS Flow. Valid values: ON, DISABLED.

PMSTATE=ON: PM collection for all MONTYPE is enabled, PM counters are reset. Current data and History data are retrievable.

PMSTATE=DISABLED: PM collection for all MONTYPE is disabled. Current data and History data are not retrievable.

enhEtsInFlowCDRowStatus

Step-Enable- ETSIn-PM

Time Period

This parameter identifies the accumulation time period for performance monitoring data (1-day or 15-minute collection register). Valid values: 15-MIN, 1 - DAY.

enhEtsIn- FlowCDGranularityPeriod