Procedure 10-2.2: PM Mode Summary
Before you begin
Obtain the work instructions for this procedure.
Step
1 |
Log in to the VLNC42B circuit pack being provisioned. |
2 |
From the Navigation menu, select ETS Flow Services → Performance Monitoring → PM Mode Summary. Result: The ETS PM Mode Summary screen appears. |
3 |
Enter the required parameters, then click Submit to display data. Reference: ETS PM Mode Summary parameters. End of steps |
ETS PM Mode Summary parameters
|
Parameter |
Value |
SNMP |
|---|---|---|
|
Time Period |
The field specifies whether the 15-minute and/or 1-day (24 hour) PM mode is to be retrieved. When BOTH is selected, both 15-MIN and/or 1-DAY PM state for the ETS Flow is received. Valid values: 15-MIN, -DAY, BOTH (default). |
enhEtsIn- FlowCDGranularity- Period |
|
Displayed Data | ||
|
ETS Flow ID |
The ETS InFlow ID. |
OpticsIMETSIn- FlowIndex |
|
Time Period |
This parameter specifies the time period. Valid values: 15-MIN or 1-DAY. |
enhEtsIn- FlowCDGranularityPeriod enhEtsOut- FlowCDGranularityPeriod |
|
PM State |
This parameter specifies whether the PM data collection is enabled or disabled for the selected ETS Flow ID. Valid values: ENABLED, DISABLED. |
enhEtsInFlowCDRowStatus |