Procedure 16-2.2: Configure Maintenance Domains (MD)
OverviewStep
1 |
From the Navigation menu, select Service OA&M → Maintenance Domain → Configuration. Equivalent CLI command: ethoam md. Result: The Maintenance Domain Configuration window displays. |
2 |
Enter the parameters as required. See Table 16-4, Maintenance Domain Configuration parameters. |
3 |
Click Submit to modify the existing MD or add new MD. Click Delete to delete the existing MD. End of steps |
MD Configuration parameters
Table 16-4: Maintenance Domain Configuration parameters
|
Parameter |
Description |
CLI command |
|---|---|---|
|
MD Name |
A drop-down list containing all existing Maintenance Domain Names plus “Create”. When “Create” is selected, a new MD name can be entered in the MD Name entry. This is to create a new MD name. If the CFM State is disabled, then the “Create” selection will be dimmed. |
ethoam md |
|
MD Name |
Maintenance Domain Name. A text string with 1 to 43 characters. There is no default value. The MD Name must be unique in the system. |
|
|
MD Level |
Valid values: an integer in the range of 0-7. |
|
|
Format |
The format of the MD name that is used in the MA ID in CFM PDUs. Valid values: String or Null |