Procedure 16-2.5: Configure remote Maintenance Association End Point (MEP)
Overview
Use this procedure to add a remote Maintenance association End Point (MEP) identifier to the list of MEPIDs for a specific Maintenance Association (MA).
Step
1 |
From the Navigation menu, select Service OA&M → Maintenance Association End Point → Remote Configuration. Equivalent CLI command: ethoam remote-mep. Result: The Remote Maintenance Association End Point Configuration window displays. |
2 |
Enter the parameters as required. See Table 16-7, Remote Maintenance Association End Point Configuration parameters. |
3 |
Click Submit to modify the existing MEP or add new MEP. Click Delete to delete an existing MEP. End of steps |
Remote MEP Configuration parameters
Table 16-7: Remote Maintenance Association End Point Configuration parameters
|
Parameter |
Description |
CLI command |
|---|---|---|
|
MD Name |
Maintenance Domain Name to which this MA belongs. This shall be a drop-down list with all MDs on the bridge. |
ethoam md <MDname> |
|
MA Name |
Maintenance Association Name. This is a drop-down list with all valid MAs in the selected MD (see the parameter above). The drop-down list contains all MAs, which do NOT have their CCM Interval set under 1 second, in the selected MD. |
ethoam ma <MAname> |
|
Remote MEP ID/Add |
This is a drop-down list containing “Add” plus all Remote MEP IDs for the selected MD/MA. |
ethoam remote-mep <remoteMEPID> |
|
Remote MEP ID |
For “Add” (see above), this is a editable field. It is the remote MEP ID to be added to the selected MD/MA. Values: an integer ranging from 1 to 8191. There is no default value. The Remote MEP ID must be unique in the MA. It must not already exist. For “Delete”, this field is a display-only field. |
ethoam remote-mep <remoteMEPID> |